 |
 |
 |
 |
|
 |
|
Features
- Listed to UL Standard 864, 9th Edition.
- Backlit 80-character LCD display (20 characters x 4 lines).
- Control switches for System Acknowledge, Signal Silence, Drill, and Reset.
- Keyswitch enables/disables control switches and mechanically locks annunciator enclosure.
- Enclosure supervised for tamper.
- System status LEDs for AC Power, Alarm, Trouble, Supervisory, and Alarm Silence.
- 5635 connects to the SBUS terminal on the 5600 and requires minimal panel programming.
- Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels.
- Time and date display field.
- Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs.
- May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC).
- Available in red (5635R) or white (5635W).
- Annunciator keys beep when they are pressed.
- Up to two 5635’s can be connected on the SBUS.
- Controls and Indicators
- • AC Power
- • Alarm
- • Trouble
- • Supervisory
- • Alarm Silenced
- Compatibility
- The 5635 is compatible with the following FACP: • 5600 Intelligent Fire Panel (Firmware revision 2.0 or higher)
- Approvals -
- • UL: S2424
- • FM approved
- • CSFM: 7120-0075:211
- • MEA: 442-06-E
|
|
|
|
|
|
|
|
| Accessory or Possible Replacement |
|
|
|
|
