 |
 |
 |
|
ACTi 's new entry level 1-channel video decoder, ACD-3100 is equipped with newly developed SoC (System on Chip). The advantages of ACD-3100 includes shorter video latency, less video jitter, shorter time in switching channels by URL command, support of Multi-Channel connect UI, lower operating temperature, less power consumption, and support of Two-Way Audio. Main Features Full D1 MPEG-4 video decoding at 30/25 FPS Digital time code retrieved Two way audio supported Hardware motion detection, Digital Input / Output
Video
Decompression MPEG-4 ASP, SP decompresssion
Picture Resolution Full D1 (720x480 in NTSC, 720x576 in PAL)
Bit Rate 28 K ~ 3 M bps
Image Frame Rate 30 fps at full D1 resolution (NTSC);
25 fps at full D1 resolution (PAL)
Video Output
CVBS, 1.0Vp-p with 75 Ω loading, BNC
connector;
Y/C, 1.0Vp-p with 75 Ω loading/0.286Vp-p
with 75 Ω loading, S connector
Audio Input
Compression 8kHz, Mono, PCM
Audio Line Input Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm
Phone Jack
Audio Output
Compression 8kHz, Mono, PCM
Audio Line Output Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm
Phone Jack
Alarm
Input 2, TTL, terminal block
Output 2, TTL, terminal block
Remote Control
Serial Port
RS-485: half duplex, terminal block
RS-422: full duplex, terminal block
RS-232: full duplex, terminal block
External I/O
Reset Button Factory default
LED System status
Network
Ethernet Port Ethernet (10/100Base-T), RJ-45 connector
Protocol TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP,
RTSP, DNS, DDNS, ICMP, ARP
Software
Web Browser Microsoft Internet Explorer 6.0 or above
SDK URL command
Security Password protection: confi gured by the
administrator
Operating
Temperature 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
Power
Power Requirement DC 12 V ±10%
Power Consumption 3.8 W
Physical
Dimensions 112 mm x 37.2 mm x 119 mm
(4.41” x 1.46” x 4.68”)
Weight 350 g (0.66 lb)
|
|
|
 |
|
 |
|
|
|
