 |
 |
 |
|
ACTi offers a series of high video quality and cost competitive IP Megapixel cameras for the requirements to see clear night mode and details demanding videos. With the launch of ACM-5611, which is bundle with the IR Corrected Lens, you not only could enjoy the high quality but also with EXTREMELY low budget. This camera definitely is the best quality and price IP Megapixel in its class. Main Features 1/3 Micron Progressive Scan CMOS
Day and night function with Mechanical IR Cut Filter (ACM-5611)
Bundled with f4.2mm / F1.8 Megapixel fixed lens
0.5 Lux (ACM-5601) / 0.05 Lux (ACM-5611) at F1.8
Shutter Speed, White Balance, Exposure, Gain Controls supported
Selectable MPEG-4 / MJPEG compression
Up to SXGA resolution at 8 FPS
Multi-stream with variable frame rate in the same compression
Two-way audio supported
Hardware motion detection, Digital Input / Transistor Output
DC 12 V or Power over Ethernet (IEEE 802.3af) supported
Device: Micron Progressive Scan CMOS
Size: 1/3 inch
Effective Pixels: 1280 x 1024
Color: 0.5 Lux at F1.8 (30 IRE,MAX AGC)
B/W: N/A 0.05 Lux at F1.8 (30 IRE,MAX AGC)
CDS Sensor: N/A Yes
IR Sensitivity: N/A from 700 nm to 1100 nm
Lens Mount: C /CS (with adaptor)
Focal Length: f4.2 mm / F1.8
Viewing Angle: 75° (Horizontal)
Sync. System: Internal
Mechanical IR Cut Filter: N/A Yes
Motion Detection: Yes (3 Windows)
Electronic Shutter: 1/10 ~ 1/2,000 sec. (60Hz); 1/10 ~ 1/2,000 sec. (50Hz)
Flickerless: 1/120 sec. (60Hz); 1/100 sec. (50Hz)
BLC: Yes
AGC: Automatic (User defined)
White Balance: 6 modes (AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL) configurable
S/N Ratio: Better than 44 dB
Compression: MPEG-4 SP, MJPEG selectable
Picture Resolution: SXGA (1280 x 1024) at 8 fps
HD720 (1280 x 720) at 10 fps
VGA (640 x 480) at 30 fps
Image Frame Rate: Up to 8 fps at SXGA resolution; Up to 10 fps at HD720 resolution; Up to 30 fps at VGA resolution
Compression: 8 kHz, Mono, PCM
Audio Line Input: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Compression: 8 kHz, Mono, PCM
Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Digital Input: 1, terminal block
Transistor Output: 1, terminal block
Reset Button: Factory default
LED: System status
Ethernet: Ethernet(10/100Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPP
Web Browser: Microsoft Internet Explorer 6.0 or above
SDK: ACTi SDK-10000
Security: Password protection: configured by the administrator
Temperature: 0 ēC ~ 50 ēC (32 ēF ~ 122 ēF)
Power Requirement: PoE (IEEE802.3af) with Class 3
Power Consumption: 3.3 W (DC 12 V)
4.3 W (PoE)
Dimensions (WxHxD): 67 mm x 55 mm x 129.5 mm
(2.64 x 2.17 x 5.10)
Weight: 400 g (0.88 lb)
|
|
|
 |
|
 |
|
|
|
