SR-2400 Proximity Reader - 125 kHz Proximity Reader, Wiegand Output, 4 to 5.5 inch Read Range, Metal Compensated, Mullion Width, Indoor/Outdoor, Gray or Beige
AWID’s SR-2400 Proximity Card Reader is the value-leader for Access Control applications. With a read range up to 5.5 inches, the SR-2400 reader delivers excellent performance without compromising quality, durability, attractive appearance, and ease of installation.
The SR-2400 reader is designed to fit perfectly on the 1-3/4 inch
standard metal door frame or window mullion. The metal-compensation that
is built into every SR-2400 reader assures minimal loss of read range when
the reader is mounted on a metal surface. The SR-2400 reader also can be
fastened by 2 screws on any wall or other surface. Installation may be indoors
or outdoors, exposed to weather.
The SR-2400 reader contains a
3-color LED and a 4 kilohertz beeper. Both
LED and beeper are controlled by the reader
itself, and also can be controlled externally
by the host system. The LED can indicate
access-granted by the host. The beeper can
be used as an alarm that prevents further
card reads until the alarm condition is
AWID’s proximity readers use a re-present mode that requires
that the user remove the card from the reader’s field before the card can be
read again. This feature eliminates multiple reads from a single presentation
of the card. The SR-2400 reader has Wiegand data interface for basic 4-wire
connection (6 wires when all features are controlled).
The SR-2400 reader is ready for challenging applications. The
ABS plastic one-part enclosure, fully potted at the back surface with epoxy
resin, stands up to physical abuse and adverse environment.
All of AWID’s 125 kilohertz proximity credentials may be used
with the SR-2400 reader. This includes clamshell and graphics-quality cards,
keytags, hangtags and adhesive wafers. Read range varies with the credential