Home > Shop Brands > Honeywell Security & Communications > Honeywell Expansion Modules & Accessories > Expansion Modules >

 

Ademco / Honeywell 4190SN - Two-Zone Remote Point Module



Ademco / Honeywell 4190SN - Two-Zone Remote Point Module


 

Our Price : $22.43

UPC Code: 781410196575

Product Code: 7271

Qty:

Description
 
Two-Zone Remote Point Module

The ADEMCO 4190SN addressable V-PlexTM module is a two-zone expander which allows use of the available expansion zones provided by ADEMCO controls that support V-Plex devices.

  • Serial mode programmable
  • Left Zone - EOLR supervised, open or closed circuit sensors
  • Right Zone - unsupervised, closed circuit sensors
  • UL listed for fire and burglary installations
Features:

The 4190SN consists of two detection loops, known as the left (primary) and right (secondary) loops. The left loop can be used for:

  • Closed-circuit devices with or without EOLR supervision
  • Open-circuit devices, with EOLR supervision
  • Fast-response (10 millisecond) devices

Follow the chart below for cutting the correct jumpers and choosing the correct resistor when using the left loop. The right loop can be used for:

  • Closed-circuit devices only
  • Has no EOLR supervision
  • 400 millisecond response time  

The jumpers do not affect the operation of the right loop. The right loop cannot be used alone.

Supervision:

The tamper/supervision response of the 4190SN is determined by the zone response type assigned to the left loop zone. While the system is armed, tamper/supervisory faults will report as alarms if the left loop zone is assigned a burglary response type and will report as troubles if the left loop zone is assigned a non-burglary response type (i.e., fire, panic, aux). While the system is disarmed, tamper/supervisory will always report as troubles.

Specifications:

    Operating Temperature:

  • 20C to +60C

    Operating Relative Humidity:

  • 0-95% non condensing

    Operating Voltage:

  • 7-14VDC, for V-Plex System

    Quiescent Current:

  • 1.2mA (LED off), 5.0mA (LED on)

    Loop Current:

  • 2 amps, max.

    Complete Short Detection:

  • <10 ohms

    Resistive Short Detection:

  • (10-400) ohms during normal polling; (10-800) ohms at application of polling loop power

    Power-On Short Detection:

  • Overload Detection:
  • Loop power level is, 6VDC

    Dimensions:

  • 4 1/8" L x 9 1/16" W x 7/8" D

    Agency Listing:

  • UL1610 - Commercial Burglary Alarm - central station alarm units
  • UL864 - Commercial Fire Alarm
  • UL985 - Residential Fire Alarm
  • UL1023 - Household Burglary - alarm system units
  • UL609 - Commercial Burglary - local alarm units
  • UL365 - Commercial Burglary - police station alarm units
  • CUL
  • CSFM
  • FM
  • CE

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Honeywell Security & Communications > Honeywell Expansion Modules & Accessories > Expansion Modules
Shop Brands > Honeywell Security & Communications > Honeywell Expansion Modules & Accessories
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please