Home > Shop Brands > Honeywell Security & Communications > Honeywell Expansion Modules & Accessories > Expansion Modules >

 

Ademco / Honeywell 4208U - Addressable Loop Expansion Module



Ademco / Honeywell 4208U - Addressable Loop Expansion Module


 

Our Price : $82.99

UPC Code: 781410006560

Product Code: 7279

Qty:

Description
 
Features
  • Can be optionally powered from an external DC power supply to reduce the amount of current draw from the polling loop
  • Uniquely identifies eight EOLR supervised zones (all zones use 10K resistors, supplied)
  • DIP Switches can be used to set zone numbers or serial numbers
  • When used in the serial number mode, each serial number in the selected group can be assigned to any zone number
  • Loops A & B can be programmed for fast (10msec) response
  • Provides cover tamper protection, which may be enabled or disabled via on-board DIP Switches

Specifications:

    Physical:

  • 6-7/16" W x 4-1/4" H x 1-1/4" D (163mm x 108mm x 32mm)

    Electrical: Polling Loop Voltage

  • 11V nominal; 8.7 - 14VDC range

    Current:

  • 33.6mA when polling loop provides power to module, 0.6mA when 12VDC input provides power to module. See chart below.

    Input Voltage:

  • 12VDC nominal; 9.4 - 14VDC range

    Expander Sensor Loop Response:

  • Slow: 400msec (all loops)
  • Fast: 10msec (option for loops A and B)

    Expander Sensor Loop Current:

  • 0.52mA (normal)
  • 1.3mA (shorted)
    NOTE: These currents apply wneh polling loop input = 11VDC and 10VDC input is not connected to external supply

    Sensor Loop Max. Resistance:

  • Up to 300 ohms of wire resistence + 10K EOLR

    Agency Listings:

  • UL985 Household Fire
  • UL1023 Household Bulgary
  • UL609 Commercial Burglary
  • UL864 Commercial Fire
  • CSFM
  • FM (Pending)
  • CUL
  • CE (requires #N6361)

    For UL Listed Commercial Fire Usage:
    Use N.O. contacts. Style B supervise these loops using Model #EOL 100 fire listed 10K EOLRs (purchased separately).
    For UL Listed Commercial Burglary Usage: Use N.O. or N.C. contacts. Supervise using EOLRs supplied.

    Power Input SourceCurrent Draw (all zones shorted)
    From Polling LoopFrom External Power
    Polling Loop Only33.6mAN/A
    Polling Loop and External Power Input0.6mA33mA

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Honeywell Security & Communications > Honeywell Expansion Modules & Accessories > Expansion Modules
Shop Brands > Honeywell Security & Communications > Honeywell Expansion Modules & Accessories
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please