Home > Fire Alarms > Fire Alarm Control Panels >


Ademco / Honeywell 5110XM-PAK1 - Kit consists of: 5110XM Fire Alarm Communicator and Digital Alarm Communicator Transmitter (DACT), 6160CR FIRE ALPHA KEYPAD- 5110XMPAK1

Ademco / Honeywell 5110XM-PAK1 - Kit consists of: 5110XM Fire Alarm Communicator and Digital Alarm Communicator Transmitter (DACT), 6160CR FIRE ALPHA KEYPAD- 5110XMPAK1


Our Price : $381.79

UPC Code: 781410193840

Product Code: 486859


PowerPak includes:
  • 5110XM Control

    The 5110XM is a UL Listed, microprocessor based fire alarm control/communicator that supports five hardwired zones. It may be used as a slave Digital Alarm Communicator Transmitter (DACT) providing central or remote station service for a central or remote station listed Fire Alarm Control Panel (FACP). It may also be used as a stand alone non-coded local, central station or remote station control.

    The model 5110XM is fully supervised and supports one two-wire smoke detection circuit and four-wire smoke detectors on all five circuits. Its powerful microprocessor continuously monitors and reports system status of AC, standby battery, zone inputs and telephone line connections. In the event of a fault condition a local audible sound is activated as well as reporting directly to central station.


    • Five supervised style B zones
    • One master code
    • Five user codes
    • Seven built-in LED indicators
    • One notification appliance circuit
    • Temporal code compliant
    • Supervised digital dialer
    • Optional panel door mounted silence/reset switch when AHJ approved
    • Supports two-wire compatible smoke detector
    • Supports up to four keypads
    • Backup digital dialer built in
    • Auxiliary form "C" relay
    • Built-in warning buzzer
    • Programmable via 6139R alpha keypad or downloader
    • Supports major communication formats
    • UL864 Listed
    • NFPA 72 compliant
    • MEA Approved
    • Upload/Download capable
    The 5110XM Fire Alarm Communicator (DACT - Digital Alarm Communicator Transmitter) is well suited for a variety of applications a stand alone fire control or slave DACT. A diverse line of ADEMCO alarm notification appliances as well as initiating devices supports this powerful control panel. Some of the applications supported are monitoring of sprinkler supervisory or waterflow switches in factory or warehouse environments, fast food chains, department stores, retail stores, library and museums as well as professional and office buildings. This panel complies with the new, June 1,1998 NFPA requirement to alternate testing of dual phone lines on a rotating basis.

    The 5110XM Fire Alarm Communicator (DACT) has been designed to mount both quickly and easily. It meets all applicable requirements for UL Commercial Fire installations. Remotely program and troubleshoot this panel via ADEMCOs WindowsTM based Compass Downloader.



      Primary power:

    • 20VAC, 60Hz, 600mA max
    • Secondary rated 18VAC, 40VA

      Quiescent panel current draw:

    • 155mA

      Backup battery:

    • 1 2VDC, 7AH min to 14AH max
    • Lead acid battery (gel type)

      Charging voltage:

    • 1 3.7VDC, nominal

      Alarm power:

    • 12VDC, 1.0A max for notification (bell) output

      Aux. standby power:

    • 12VDC,350mA max

      Total power:

    • 1.0A from all sources

      Aux. relay output:

    • Type: Form C

      Standby time:

    • 24 hours with 1A standby load or 60 hours with 210mA max standby load using 14AH battery


    • Battery input, aux. and notification (bell) appliance circuits are protected using PTC circuit protectors. All outputs are power limited.


    Line seize:

  • Double Pole

    Ringer equiv.:

  • 0.7B


  • ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics

    Mechanical: Cabinet dimensions 14.5H X 1 2.5W X 3D


  • -10C to 70C

    Operating temp:

  • 0C to 50C


  • 85% RH


  • Meets or exceeds the following requirements:
    FCC Part 15, Class B Device
    FCC Part 68
    IEC EMC Directive

    The 5110XM has been listed and approved for use in commercial fire applications. It has been listed under the following agency approvals: Fire

  • UL864/NFPA72 Central and Remote Station DACT and Local, Central Station and Remote Station Control
  • Factory Mutual
  • California State Fire Marshall
  • MEA

  • Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Fire Alarms > Fire Alarm Control Panels
    Shop Brands > Honeywell Security & Communications > Honeywell Fire Systems & Accessories
    Shop Brands > Honeywell Security & Communications > Honeywell Security Kits > Combination Fire / Burglary
    Shop Brands > Honeywell Security & Communications > Honeywell Security Kits

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please