You are here: Home > Burglar Alarms / Intrusion >

Control Panels for Burglar Alarm Systems

>

Wireless Control Panels for Burglar Alarm Systems

> Ademco Honeywell LYNX
We found 25 results matching your criteria.
Ademco Honeywell LYNX Wireless Control Panels
Sort By:
Page of 3
L3000-SIA LYNX Plus Wireless Self-Contained Security Control Kit Ademco WALYNXRCHBSC Rechargeable Battery for LYNXR & LYNXR-EN
L3000SIA - LYNX Plus Wireless Self-Contained Security Control with SIA CP-01 compliance

With its uncompromising technology, reliability and self-contained architecture, Honeywell’s LYNX Plus is easier to install and use than any other self-contained system. LYNX Plus is a combination control panel, keypad, siren, dialer, two-way voice system and speakerphone in one. It offers full Contact ID information to your central station via TELCO, Internet and GSM communications using the 7847i-L or GSMVLP. It also offers two-way voice over GSM radio using the GSMVLP. These models easily install inside the same plastic case as the LYNX Plus with no additional enclosures to mount. The new communications options give you the flexibility you need to address the emergence of VoIP, POTS migration to cellular and the growth of digital radio networks.

The all-in-one integrated design combines the installation flexibility for every job with the proven reliability of Honeywell’s technology. The convenient voice prompt programming feature walks you through the installation process—helping reduce installation costs. The voice annunciation of status and alarms reduces the amount of end-user training. LYNX Plus supports all Honeywell 5800 Series wireless devices, including the 5828 and 5828V wireless keypads.

Videos

LYNX Plus User’s Guide

 

 

Video Commercial for End Users

 

 

Easy Installation for Dealers

 

Rechargeable Battery for LYNXR & LYNXR-EN

L3000PK LYNX Plus Wireless Self-Contained Security Control Kit LYNX Plus Wireless Self-Contained Security Control
L3000PK - LYNX Plus Wireless Self-Contained Security System (Includes three (3) 5816 Transmitters, one (1) 5890PI Wireless Motion Detector and one (1) 5804 Wireless Key Remote)

With its uncompromising technology, reliability and self-contained architecture, Honeywell's LYNX Plus is easier to install and use than any other self-contained system. LYNX Plus is a combination control panel, keypad, siren, dialer, two-way voice system and speakerphone in one. It offers full Contact ID information to your central station via TELCO, Internet and GSM communications using the 7847i-L or GSMVLP. It also offers two-way voice over GSM radio using the GSMVLP. These models easily install inside the same plastic case as the LYNX Plus with no additional enclosures to mount. The new communications options give you the flexibility you need to address the emergence of VoIP, POTS migration to cellular and the growth of digital radio networks.

The all-in-one integrated design combines the installation flexibility for every job with the proven reliability of Honeywells technology. The convenient voice prompt programming feature walks you through the installation processhelping reduce installation costs. The voice annunciation of status and alarms reduces the amount of end-user training. LYNX Plus supports all Honeywell 5800 Series wireless devices, including the 5828 and 5828V wireless keypads.

Videos

LYNX Plus Users Guide

 

 

Video Commercial for End Users

 

 

Easy Installation for Dealers

 

With its uncompromising technology, reliability and self-contained architecture, Honeywell's LYNX Plus is easier to install and use than any other self-contained system. LYNX Plus is a combination control panel, keypad, siren, dialer, two-way voice system and speakerphone in one. It offers full Contact ID information to your central station via TELCO, Internet and GSM communications using the 7847i-L or GSMVLP. It also offers two-way voice over GSM radio using the GSMVLP. These models easily install inside the same plastic case as the LYNX Plus with no additional enclosures to mount. The new communications options give you the flexibility you need to address the emergence of VoIP, POTS migration to cellular and the growth of digital radio networks.

The all-in-one integrated design combines the installation flexibility for every job with the proven reliability of Honeywells technology. The convenient voice prompt programming feature walks you through the installation processhelping reduce installation costs. The voice annunciation of status and alarms reduces the amount of end-user training. LYNX Plus supports all Honeywell 5800 Series wireless devices, including the 5828 and 5828V wireless keypads.

Videos

LYNX Plus Users Guide

 

 

Video Commercial for End Users

 

 

Easy Installation for Dealers

 

Ademco LYNXRCHKITSC Lynx Main System 4-Hour Back Up Battery with Leads Honeywell  LYNXRCHK-HC  24-Hour Backup Battery for L5000 - LYNXRCHKITHC - REPLACES WALYNXRCHBHC

Lynx Main System 4-Hour Back Up Battery with Leads

This Is A Replacement Ademco Lynx Main System Battery Back Up
Ademco Lynx Upgrade 4-Hour Main System Back Up Battery.
This battery has Red and Black Flying Leads.
Honeywell LYNXRCHKIT-SHA  24-Hour Backup Battery for L5000 and GSMVLP5 Radio
Honeywell 6280W White Color Graphic Touchscreen Keypad with Voice Honeywell GSMV4G 	Digital Cellular Communicator with Two-way Voice Transport Capability

Honeywell's feature-rich 6280 Color Graphic Voice Touchscreen Keypad family gives you the opportunity to close more sales, increase retention and capture new markets.* They feature a high-resolution 7" widescreen TFT display that doubles as a digital picture frame. There is a choice of silver and white color schemes, three language options and voice annunciation of alarm conditions. The new intuitive user interface features icons and menus that make system operation easy to navigate. The 6280 uses the same icons as Total ConnectTM 2.0, helping to reduce end-user training and costly false alarms.

The digital picture frame and video viewer features let end-users create slideshows and view home movies on the brilliant, high resolution TFT display. Homeowners can customize the slideshow with family photos, vacation pictures and more.

The choice of two color housings and three languages (ideal for homes with multilingual members) opens up new opportunities and markets that previously were untapped. Silver blends perfectly in stainless steel kitchens and garages. White, a popular classic choice, blends seamlessly with lighter décors.

To help you close more sales, Honeywell has created a handheld demo (6280WHD) that includes a sales informercial video that highlights the features and end-user benefits of the 6280. The video can be played by simply pressing a button.

*Voice annunciation option in English only.

Features

  • High-resolution, 7" widescreen 640 x 480 TFT display
  • 16 million colors capability to display vivid images
  • Intuitive touchscreen display with icons and menu driven prompts (English only)
  • Digital picture frame, slideshow or home movies through standard SD card
  • Available in two colors
    - Silver: Ideal for kitchens with stainless steel appliances, garages and basements
    - White: Blends seamlessly with most lighter décors
  • Three languages can be displayed
    - English
    - Spanish (Latin American)
    - French Canadian
  • Voice annunciation of type and location of alarm (English only)
  • Family message center that lets end-users record and playback messages
  • Entry/Exit countdown displayed
  • Authorized end-user can easily add or delete user codes
  • View zone lists with status
  • End-user can quickly and easily bypass zones
  • Embedded infomercial video in keypad to help in the sales process

Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

Transmission Protocols
Honeywell’s IntelliPath Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary.

The following wireless communication protocols are supported:
HSPA+ (4G )
HSPA (HSDPA & HSUPA) (3G)
EDGE (2G)
GPRS (2G)

This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery

Features
  • Multi-GSM platform compability —2G, 3G and 4G
  • Automatic selection of the best available GSM network
  • 4G capable using HSPA+ protocol
  • Full Contact ID or ADEMCO® High-Speed Reporting
    Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
  • 256-bit AES Encryption
    Advanced encryption standard used for secure communications.
  • Upload/Download
    Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
  • Integration
    Quick and easy installation of GSM for VISTA® and LYNX controls.
  • Dynamic Signaling with Certain Honeywell Control Panels
    Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
  • Diagnostic LEDs
    Provide signal strength and status indications.
  • QOS
    Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
  • Web-Based Programming
    Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com /AlarmnetDirect
  • Intelligent Supervision
    Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
  • Remote Services Capability*
    Optional Honeywell Total Connect Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
  • Two-way Voice Transport
    GSM voice channel capable to allow two-way voice session in conjunction with an audio verification system (GSMX4G/iGSMV4G/GSMV4G/ VISTA-GSM4G).
  • Line Security
    Approved for line security applications with 200-second supervision intervals (iGSMHS4G).

*Service subscription required.

Honeywell GSMVLP5-4G Internal GSM Radio with Two-Way Voice Support Honeywell GSMX4G 	Digital Cellular Communicator for VISTA Control Panels
Honeywell GSMVLP5-4G Internal GSM Radio with Two-Way Voice Support - Honeywell Lynx Touch 4G Digital Cellular Communicator

The GSMVLP5-4G is an optional communication module intended for use with Lynx Touch Wireless Alarm Kit controls, and provides wireless communication with the AlarmNet network for backup delivery of alarm and other messages to the monitoring central station. It also supports voice communications between the control panel and the Central Station. This communication module transmits signals via the AlarmNet-G network (GSM cellular network), using GPRS and forwards them to your Central Station. If the GPRS network is unavailable, the GSMVLP5-4G will attempt to send the transmission via SMS.

Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

Transmission Protocols
Honeywell’s IntelliPath Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary.

The following wireless communication protocols are supported:
HSPA+ (4G )
HSPA (HSDPA & HSUPA) (3G)
EDGE (2G)
GPRS (2G)

This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery

Features
  • Multi-GSM platform compability —2G, 3G and 4G
  • Automatic selection of the best available GSM network
  • 4G capable using HSPA+ protocol
  • Full Contact ID or ADEMCO® High-Speed Reporting
    Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
  • 256-bit AES Encryption
    Advanced encryption standard used for secure communications.
  • Upload/Download
    Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
  • Integration
    Quick and easy installation of GSM for VISTA® and LYNX controls.
  • Dynamic Signaling with Certain Honeywell Control Panels
    Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
  • Diagnostic LEDs
    Provide signal strength and status indications.
  • QOS
    Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
  • Web-Based Programming
    Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com /AlarmnetDirect
  • Intelligent Supervision
    Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
  • Remote Services Capability*
    Optional Honeywell Total Connect Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
  • Two-way Voice Transport
    GSM voice channel capable to allow two-way voice session in conjunction with an audio verification system (GSMX4G/iGSMV4G/GSMV4G/ VISTA-GSM4G).
  • Line Security
    Approved for line security applications with 200-second supervision intervals (iGSMHS4G).

*Service subscription required.

Honeywell UL Listed IntelliPath iGSMHS4G High Security Communicator Honeywell iGSMV4G 	Internet and GSM Communicator with Two-way Voice Transport Capability
UL Listed IntelliPath iGSMHS4G High Security Communicator

Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

Transmission Protocols
Honeywell's IntelliPath™ Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary. The following wireless communication protocols are supported:
HSPA+ (4G )
HSPA (HSDPA & HSUPA) (3G)
EDGE (2G)
GPRS (2G)

This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

Features
  • Multi-GSM platform compability —2G, 3G and 4G
  • Automatic selection of the best available GSM network
  • 4G capable using HSPA+ protocol
  • Full Contact ID or ADEMCO® High-Speed Reporting
    Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
  • 256-bit AES Encryption
    Advanced encryption standard used for secure communications.
  • Upload/Download
    Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
  • Integration
    Quick and easy installation of GSM for VISTA® and LYNX controls.
  • Dynamic Signaling with Certain Honeywell Control Panels
    Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
  • Diagnostic LEDs
    Provide signal strength and status indications.
  • QOS
    Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
  • Web-Based Programming
    Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com/AlarmnetDirect
  • Intelligent Supervision
    Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
  • Line Security
    Approved for line security applications with 200-second supervision intervals.
  • Six Input Zones
    Digital processing for improved detection and false alarm protection
  • Tamper Protected Enclosure
    Built-in tamper sends a report when a tamper condition is detected and a restore when cleared.
  • Built-in Power Supply
    Onboard charging circuit design accommodates back-up battery. Includes primary power and battery supervision.
  • Back-Up Battery
    6V 3.1Ah supplied to deliver up to 24 hours of standby operation.

Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

Transmission Protocols
Honeywell's IntelliPath™ Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary. The following wireless communication protocols are supported:
HSPA+ (4G )
HSPA (HSDPA & HSUPA) (3G)
EDGE (2G)
GPRS (2G)

This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

Features
  • Multi-GSM platform compability —2G, 3G and 4G
  • Automatic selection of the best available GSM network
  • 4G capable using HSPA+ protocol
  • Full Contact ID or ADEMCO® High-Speed Reporting
    Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
  • 256-bit AES Encryption
    Advanced encryption standard used for secure communications.
  • Upload/Download
    Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
  • Integration
    Quick and easy installation of GSM for VISTA® and LYNX controls.
  • Dynamic Signaling with Certain Honeywell Control Panels
    Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
  • Diagnostic LEDs
    Provide signal strength and status indications.
  • QOS
    Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
  • Web-Based Programming
    Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com/AlarmnetDirect
  • Intelligent Supervision
    Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
  • Remote Services Capability*
    Optional Honeywell Total ConnectTM Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
  • Two-way Voice Transport
    GSM voice channel capable to allow two-way voice session in conjunction with an audio verification system.
  • Universal Control Panel Compatibility
    Flexible modes of operation allow ECP alarm reporting by Honeywell control panels, 4204 relay mode for Honeywell controls (that do not support ECP alarm reporting) and zone triggering for use with other control panels.
  • Dialer Capture Ready
    Compatible with Dialer Capture Intelligence Device DCID (for LYNX) or DCID-EXT (other control panels). Captures Contact ID messages from the panel’s phone line and sends them to the central station via the GSM radio (not agency approved).
  • Six Input Zones
    Digital processing for improved detection and false alarm protection
  • Tamper Protected Enclosure
    Built-in tamper sends a report when a tamper condition is detected and a restore when cleared.
  • Built-in Power Supply
    Onboard charging circuit design accommodates back-up battery. Includes primary power and battery supervision.
  • Back-Up Battery
    6V 3.1Ah supplied to deliver up to 24 hours of standby operation.

*Service subscription required.

   
 
Ademco Honeywell LYNX Wireless Control Panels
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please