Ademco / Honeywell V128FB-24 - VISTA-128FB Commercial Fire and Partitioned Burglary Alarm Platform, supports 128 Zones/Points, 24V Model - V128FB24 is made by Ademco and is listed in our Control Panels and Combination Fire / Burglary

24V MODEL

Designed to integrate seamlessly with CCTV, access control and Honeywell’s full range of fire and burglary components, the VISTA-128FB provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions and supports up to 128 zones/points using hardwired, wireless and addressable V-Plex technologies.

A diverse line of Honeywell initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays support this extremely powerful control platform. The VISTA-128FB has been designed to mount quickly and easily in an attack resistant cabinet and is available in 12V and 24V models.

FEATURES:

Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
Supports up to 15 doors of access control using VISTA Gateway Module (VGM)*
Supports CCTV applications with the new VistaView-100 CCTV switcher module
Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire system annunciator
Stores up to 512 events and can accommodate 150 user codes
New E2 software simplifies programming
Easily programmed and maintained with newly upgraded Compass Downloader software
Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
Can control eight separate areas independently (8 partitions)
Two on-board notification (bell) circuits delivering 2.3A @ 12V or 3.4 amp @ 24V
Automatic smoke detector sensitivity maintenance testing

* Connects to Honeywell's Passpoint Access Control Systems. Maximum 32 doors.

CONTROL PANEL SPECIFICATIONS:

Cabinet dimensions:

18"H X 14.5"W X 4.3"D

Environmental:

Storage temp: -14°F to 158°F (-10°C to 70°C)

Operating temp: -32°F to 122°F (0°C to 50°C)

Humidity: 85% RH

EMI: Meets or exceeds the following requirements:

FCC Part 15, Class B Device

FCC Part 68

IEC EMC Directive

Agency Listings: Burglary

UL609 Grade A Local Mercantile Premises and

Mercantile Safe and Vault

UL611/1610 Grades A, AA, Central Station

UL365 Grades A, AA Police Connect

Fire:

UL864 FPA72 Local, Central Station and Remote Station

Factory Mutual

California State Fire Marshal

MEA

UL985

Additional Features:

Notification Appliance Circuits (two)

Programmable

Temporal code compliant

Individually silenceable

Programmable on-board auxiliary relay

SIA false alarm reduction features:

Exit Error Logic

Exit Delay Reset

Cross Zoning

Call Waiting Defeat

Recent Close Report

Supports commercial hardwired, addressable V-Plex polling loop and wireless zones

Hardwired zones:
– Provides nine style B hardwired zones
– EOLR supervised for Fire and UL burglary installations
– Supports N.0 or N.C. sensors
– Individually assignable to one or all eight partitions
– Up to 16 two-wire smoke detectors each zone 1 and 2 (32 total)
– Up to 50 two-wire glass break detectors on zone eight

Patented addressable V-Plex polling loopV-Plex technology:
– Supports up to 120 two-wire zones/points
– Global polling technology for faster processing
– Increased current draw capacit (128mA)
– Supervised by panel
– Individually assignable to partitions, notification circuit (bell) output or aux relay
– 4,000 ft capability without the use of shielded cable
– Extender/Isolation bus module
– Two-wire smoke detector zone/group expansion module adds two or four zones
– Eight zone – Class A and B Extender Module
– One zone supervised Contact Monitor Module

UL Listed wireless expansion
– Supports up to 128 wireless zones using 5881 Receiver
– Supervised by control for check-in signals
– Tamper protection for transmitter
– Individually assignable up to eight partitions
– Supports UL864 FPA approved wireless smoke\ndetectors

Access control integration
– Full integration with PassPoint
– Access Control System Complete Gateway in access functions

Event reporting

Local printer of access or VISTA related event

Scheduled uploading of events to central station

Stored events for one call retrieval

Communication
– Phone mapping by zone response type
– Supports VIP Interactive Phone Voice Module
– Panel operation during download
– Uploading equipment list to central station
– Communication to PassPoint via Vista Gateway Module (VGM)

Applications: Supported by a diverse line of Honeywell initiating devices, the powerful VISTA-128FB is the ideal integrated fire and burglary control for applications where a higher level of security is necessary including medical and professional buildings, supermarkets, churches and synagogues, office buildings, schools, universities, strip malls, larger residences and factory or warehouse environments.

Installation: The VISTA-128FB alarm system has been designed to mount both quickly and easily in an attack resistant cabinet. It meets all applicable requirements for UL commercial burglary installations.

Electrical Specifications:

Primary power:
– 18 VAC@ 72 VA No. 1450
– Quiescent current draw:
– 350mA

Backup battery
– 12VDC, 12AH min to 34AAH max
– Lead acid battery (gel type)

Alarm power
– 12VDC, 1.7A max for each notification (bell) circuit output

Aux. standby power
– 12VDC, 1A max

Total power
– 2.3A at 12VDC, 3.4A at 24VDC from all sources

Standby time
– 24 hours with 1A standby load or 60 hours with 205mA max standby load using 34AAH battery

Fusing
– Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.

Main dialer
– Line seize:
– Double Pole

Ringer equiv.:

0.713

Formats:

ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics