Ademco / Honeywell VISTA-40 Universal Control Panel - VISTA40 is made by Ademco and is listed in our Door Activation Devices and Push/Exit Buttons

Enhanced version of the 4140XMP

The feature-rich VISTA-40 Control Panel is a cost-effective solution for almost any application. Features include advanced partitioning, end-user simplicity and compatibility with the best wireless technology today.

A powerful control, the VISTA-40 can support residential installations and operate lights and appliances - providing you with greater installation flexibility while offering your customers the ultimate in convenience.

Dependable features to meet your most demanding installations

Nine hardwired zones, expandable to 64 zones
Two partitions with seven authority levels
70 user codes
100 event alarm history log
Two-way downloading
Supports 16 two-wire smoke detectors and 16 keypads
Three technology options:
- Standard hardwired, expander 4208U (8 zones) 4190WH (2 zones)
- ADEMCO polling loop addressable devices
- Wireless (5800 series)
Supports up to eight relays
Supports X-10 transformer (Part No. 4300)
Long Range Radio triggers (four)

End users will appreciate the easy-to-use convenience and control features of the VISTA-40

Wireless remote controls (featuring single button system operation):
- 5804 - Four button programmable wireless key
- 5804BD - Bi-directional four-button programmable wireless key with system status feedback
Single or dual-button wireless personal panic:
- 5802MN
- 5802MN2
Home automation activates lights, appliances, garage doors, and numerous other devices
The Vista Interactive Phone Module (VIP) gives the end-user control of the system from any touchtone phone; the 4286 VIP responds in clear English, with over a 100 word vocabulary
Full English display keypads clearly communicate system status and zone locations

Electrical Specifications:

Aux power 12VDC, 750 max.

16.5VAC/40 VA transformer

Alarm output 12VDC, 1.7 amps max

For UL installations, combined Aux and alarm output cannot exceed 750mA

EOutput Control:

Supports up to two relay boards (Part No. 4204)

Each relay board supports four relays for a total of eight

Optional X-10 transformer/interface (part number 4300) may be used to control X-10 receiving devices

Zones:

Nine hardwired zones

Selectable response on zone 9: 10msec or 500msec

Assignable to either partition

14 zone types to choose from

Programmable swinger suppression

Expandable to 64 zones using 5800 wireless, or hardwired expansion

Communications:

Touchtone or pulse

Formats supported: ADEMCO Contact ID, ADEMCO 4 + 2 Express, ADEMCO low speed

3+1, 4+1 and 4+2 reporting

Reporting capabilities: Split, Dual, Split/Dual

Low battery reports 11.2-11.6VDC

Expanded reporting

Up to four digit PABX code supported

True dial tone detection

Double pole line seizure

AC loss and restoral reporting supported

SUPPORTED DEVICES

Hardwired Expansion Devices:

4208U up to eight zones - 25 mA

4204 up to eight relays - 15mA (each active relay draws 40mA)

Powerline support - 4300 transformer/interface

Keypads
6139 custom English (required for programming) - 100mA
6128 fixed English LCD - 30mA

Voice Module 4286VIP - 160mA

Two-wire smoke detectors

V-Plex polling loop devices and keyswitch devices

Wireless Receiver Systems:

5800 Receivers
5881ENL up to 8 zones - 50mA
5881ENM up to 16 zones - 50mA
5881ENH up to 64 zones - 50mA

All receivers support:
Diversity reception with two antennas
Remote mounting for best location
A second receiver for maximum coverage or tough installations
Unique supervision and low battery indications by point

Transmitters:

5800 Series - three volt lithium batteries, one mile range, tamper standard

Agency Listings:

UL Residential Fire and Burglary and CFM

Commercial Burglary (with VISTA-UL kit)