The VISTA-20PUL also includes Ethernet uploading and downloading capability for Internet and Intranet use via Honeywell’s 7845i or 7845i-ENTcommunications products. The panel’s installation advantages,appealing end-user benefits and robust system capacity make the value-priced VISTA-20PUL an ideal choice for light commercial applications.

Designed to integrate seamlessly with CCTV, access control and Honeywell’s full range of fire and burglary components, the new VISTA-250FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions and supports up to 250 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of Honeywell initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by this extremely powerful control platform. The VISTA-250FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels and even buildings, to be armed, disarmed or have status checked…from one location!

Features

• Comes standard with eight hardwired zones, expandable to 242 V-Plex addressable points/zones or 250 wireless points/zones
• Can control eight separate areas independently (eight partitions)
• Supports Panel-Linking: Allows up to eight systems or buildings to be controlled from one central location (using VA8200)
• Supports Commercial UL Wireless Fire and Burglar
• Stores up to 1,000 events and can accommodate 250 user codes
• Supports V-Plex addressable VistaKey access control (up to 15 doors and 500 cards)*
• Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
• Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
• Identifies the point or zone of a fire or alarm using the new FSA-8/FSA-24 Fire System Annunciator
• Two on-board notification (bell) circuits delivering 2.3A @ 12V or 3.4A @ 24V
• Automatic smoke detector sensitivity maintenance testing
• Four-wire smoke reset using onboard J2 output trigger
• Supports Dynamic Signaling for long range radio backup
• Supports remote control via the Internet**
• Supports Internet Alarm Reporting**
• Supports Graphical User Interface consoles
• Supports Alphanumeric Pager: up to eight different numbers using the VA8201
• Notification Appliance Circuits (two):
– Programmable
– Temporal code compliant
– Individually silenceable
• Programmable on-board auxiliary relay
• SIA false alarm reduction features:
– Exit error logic
– Exit delay reset
– Cross zoning
– Call waiting defeat
– Recent close report
• Supports commercial hardwired, addressable polling loop and wireless zones
• Hardwired zones:
– Provides eight style B hardwired zones
– Supports N.O. or N.C. sensors
– Individually assignable to any partition
– Up to 32 two-wire smoke detectors each on zones one and two (64 total)
– Up to 50 two-wire glassbreak detectors on zone eight
– EOLR supervised for Fire and UL burglary installations

* Connects to Honeywell Access’ PassPoint Access Control Systems. Maximum 32 doors.
** When used with AlarmNet-i.

Additional Features

• Patented addressable polling loop technology
– Supports 242 two-wire zone points
– Global polling technology for faster processing
– Increased current draw capacity (128mA)
– Supervised by panel
– Individually assignable to partitions, notification circuit (bell) output or auxiliary relay
– 4,000 ft. capability without the use of shielded cable
– Extender/Isolation bus module
– Two-wire smoke detector zone/group expansion module adds two or four zones
– Eight zone – Class A and B extender module
– Eight zone – Class B extender module
– One zone supervised contact monitor module
• UL Listed wireless expansion
– Supports up to 250 wireless zones/points using 5881ENHC Receiver
– Supervised by control for check-in signals
– Tamper protection for transmitters
– Individually assignable up to eight partitions
– Supports UL864/NFPA approved wireless smoke detectors
• Access Control Integration
  – Full integration with PassPoint Access Control System
• Up to 15 doors using VistaKey Access Control
• Event reporting
• Local printer of access or VISTA related event
• Scheduled uploading of events to the central station
• Stored events for one call retrieval
• Communication
– Phone mapping by zone response type
– Supports VIP Interactive Phone Voice Module
– Panel operation during download
– Uploading equipment list to the central station
– Communication to PassPoint via VISTA Gateway Module
• CCTV integration
  – Supports VistaView-100 ECP based CCTV switchers
• Applications
• Supported by a diverse line of Honeywell initiating devices, the powerful VISTA-250FBP is the ideal integrated fire and burglary control for applications where a higher level of security is necessary. Some examples of applications include: medical and professional buildings, supermarkets, churches, synagogues, schools, universities, strip malls, factories, warehouses, and larger residences.

Installation:
The VISTA-250FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

Electrical Specifications:

Honeywell’s feature-rich VISTA-10P is the industry’s most economical, versatile control and ideally suited for a wide range of applications. The six-zone panel significantly reduces dealer training and service call costs thanks to user-friendly features that make operation easier than ever, and increases upsell opportunities through its expansion capabilities and flexibility. 

ADEMCOs VISTA-128B is an 8-partition, UL/CUL Commercial Burglary Control Platform that supports up to 128 zones using basic hardwired, polling loop, and wireless zones. It also includes zones for supervision of bells,keypads, RF receivers, and relays. In addition, the control offers scheduling capabilities and allows certain operations to be automated by pressing a single button.

The system has the capability to interface with an ECP Long Range Radio unit that can send Contact ID messages and an alphanumeric paging device. When connected to ADEMCOs PassPoint system (via the Vista Gateway Module), the VISTA-128B provides a fully integrated security and access control system.

The VISTA-128B is well suited for a variety of applications as a burglary control and is supported by a diverse line of ADEMCO initiating devices. Some of the applications supported are medical and professional buildings, supermarkets, churches or synagogues, office buildings, schools, universities, strip malls, larger residences and factory or warehouse environments.

The VISTA-128B has been designed to mount quickly and easily and meets all applicable requirements for UL/CUL-Commercial Burglary installations. Use the VISTA-ULKT kit when an attack resistant enclosure is required.

• Provides nine style-B hardwired zones
• Supports up to 119 additional zones using a built-in polling (multiplex) loop interface
• Can control up to eight separate partitions independently, each functioning as if it had its own separate control
• Accommodates 150 user codes with seven authority levels
• Supports up to 128 wireless zones using a 5881 type RF receiver (fewer if using hardwired and/or polling loop zones)
• Supports the 5817CB Wireless Commercial Transmitter
• Supports the 5869 Wireless Commercial Burglary Hold-up switch
• Supports the 5881ENHC Wireless Commercial receiver
• Accommodates 32 keypad macro commands per system
• Keeps a log of up to 512 events
• Supports up to 16 two-wire smoke detectors on zone 1
• Supports up to 50 latching-type glassbreak detectors on zone 8
• Integrates with PassPoint access control to provide increased users, event log, and scheduling
• Supports V-Plex addressable VistaKey access control (up to 8 doors)
• Easily programmed and maintained using Compass Windows-based downloader
• Supports the ADEMCO 4286 VIP Module

Basic Hardwired Zones
Provides nine style-B hardwired zones with the following characteristics:

Polling Loop Expansion

Scheduling

Eight Partitions

User Codes

Peripheral Devices

At least one two-line alpha keypad (6139/6160) must be connected to the system for programming (if using keypad programming) and must remain connectedto the system in order to allow the primary user to program additional usercodes into the system at a later time.

Keypad Macros
Accommodates 32 keypad macro commands per system (each macro is a series of keypad commands). For example, by pressing either the A, B, C, or D key, the system can be programmed to log onto another partition, bypass Zones 2 and 3,and arm that partition in the AWAY mode. Characteristics of keypad macros are:

Optional Output Relays

Optional VISTA Interactive Phone Module

Optional Keyswitch

Voltage Triggers
Provides a trigger connector whose pins change state for different conditions. Used with LRR (Long Range Radio) equipment or other devices such as a remote keypad sounder, keyswitch ARMED and READY LEDs, or a printer to print the systems event log.

Event Log
Keeps a log of different event types (enabled in programming). The event log has the following characteristics:

Cross-Zoning Capability

Exit Error False Alarm Prevention Feature

Communication Formats

Improved Downloading Features

CCTV: Switcher Module

Access Control

Agency Listings

Designed to integrate seamlessly with CCTV, access control, and ADEMCOs full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

• Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
• Can control eight separate areas independently (8 partitions)
• Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
• Supports commercial UL wireless fire and burg
• Stores up to 512 events and can accommodate 150 user codes
• Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
• Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
• Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
• Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
• Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
• Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
• Automatic smoke detector sensitivity maintenance testing
• 4-wire smoke reset using onboard J2 output trigger
• Supports Dynamic Signaling for LRR
• Supports Remote Control-via the internet**
• Supports Internet Alarm Reporting**
• Supports the new Graphical User Interface Consoles
• Supports up to 250 access card holders using VistaKey
• Supports AlphaNumeric pager up to 8 different numbers using the VA8201

** When used with AlarmNet-i

ADDITIONAL FEATURES

• Notification Appliance Circuits (two):
  - Programmable
  - Temporal code compliant
  - Individually silenceable
• Programmable on-board auxiliary relay
• SIA false alarm reduction features:
  - Exit error logic
  - Exit delay reset
  - Cross zoning
  - Call waiting defeat
  - Recent close report
• Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
• Hardwired zones
  - Provides eight style B hardwired zones
  - EOLR supervised for Fire and UL burglary installations
  - Supports N.O or N.C. sensors
  - Individually assignable to any eight partition
  - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
  - Up to 50 two-wire glassbreak detectors on zone eight
• Patented addressable V-Plex polling loop technology
  - Supports 120 two-wire zones points
  - Global polling technology for faster processing
  - Increased current draw capacity (128mA)
  - Supervised by panel
  - Individually assignable to partitions, notification circuit (bell) output or aux relay
  - 4,000 ft capability without the use of shielded cable
  - Extender/Isolation bus module
  - Two-wire smoke detector zone/group expansion module adds two or four zones
  - Eight zone - Class A and B extender module
  - Eight zone - Class B extender module
  - One zone supervised contact monitor module
• UL Listed wireless expansion
  - Supports up to 128 wireless zones/points using 5881ENHC receiver
  - Supervised by control for check-in signals
  - Tamper protection for transmitters
  - Individually assignable up to eight partitions
  - Supports UL864/NFPA approved wireless smoke detectors
• Access Control integration
  - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
• Up to 8 doors using VistaKey V-Plex Access Control
• Event reporting
• Local printer of access or VISTA related event
• Scheduled uploading of events to central station
• Stored events for one call retrieval
• Communication 
  - Phone mapping by zone response type
  - Supports VIP interactive phone voice module
  - Panel operation during download
  - Uploading equipment list to central station
  - Communication to PassPoint via Vista Gateway Module
• CCTV integration
  - Supports VistaView-100 ECP based CCTV switchers

Installation
The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

The versatile VISTA-15P is the ideal choice for any residential installation. Hardwired expansion, graphic keypad support, two-wire smoke detectors, scheduling options and a host of end-user and installer features separate the VISTA-15P from all other six-zone panels offering you and your customers the most panel for the dollar.

Features

• Six on-board hardwired zones
  - 16 hardwired expansion zones totaling 22
  - 26 wireless expansion zones
• Supports 6270 and 8132 traphic touchscreen keypads
• Eight independent keyfob zones allow wireless keys to be programmed without using any of the 26 zones
• Eight output devices
  - Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
  - X-10 devices (when used with a1361X10 Transformer)
• Two low current on-board trigger outputs
• 50 Event Log viewable at system keypads with time/date stamp
• 32 system user codes
• Two installer configurable zone types allows the installer to "create custom zone types" by assigning all zone attributes
• Multiple actions on output devices depending on system "state"
  - Turns light off when system arms
  - Turns same lights on when system disarms
  - Flashes same lights when system is in alarm
• Built-in phone line cut monitor with programmable delay and annunciation options
  - Display on system keypads
  - Trigger local sounders
  - Trigger system bell
• Supports four-wire, and up to 16 two-wire smokes
  - Works with Sentrol CleanMe^TM maintenance signal

• Now viewable on system keypads:
  - Exit countdown
  - Time and date display*
  - Event log*
• Auto keypad backlighting on entry
• Keyswitch arming
• Programmable macro buttons and single-button arming
• A variety of wireless remote controls for single-button operation
• User Scheduling
  - Automatically activates X-10 and relays at programmed times
  - Latchkey reports to pagers
  - Auto arm/disarm
  - "User access" time windows
• Supports up to two numeric pagers
• VIP Module allows system control from any touchtone phone
• Chime by zone

Security Dealer Features

• Automatic System Load Shed
  - During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries
• Dynamic Signaling
  - Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet Radio

The VISTA-250BP is an eight partition, eight to 250 zone UL listed commercial burglary control panel that meets the demanding requirements for today’s medium-sized commercial installations while simplifying the end-user operation.

The VISTA-250BP is ideal for locations like large office complexes, medical clinics, bank branches, medium-to-largesized distribution centers, warehouses, auditoriums, school campuses and other large public buildings.

This panel provides system scalability and utilizes conventional V-Plex and wireless zone expansion. The VistaKey access control system, Vistaview-100 and Optiflex allow seamless integration with this powerful commercial platform. The VISTA Navigator Controller/Reporter allows on-site remote work station system operation and management. The VISTA-250BP interfaces with AlarmNet GSM/iGSM Communicators even without POTS lines.

Features

• Provides nine on-board style-B hardwired zones
• Supports up to 241 additional zones using a built-in polling (multiplex) loop interface
• Supports up to 250 wireless zones using 5881 type RF receiver (fewer if using hardwired and/or polling loop zones)
• Provides 1 power-limited bell circuit delivering 1.7Amp (max) at 12Vdc
• Provides the ability to control eight separate partitions independently, each functioning as if it had its own separate control
• Accommodates 250 user codes with seven authority levels per partition
• Accommodates 32 keypad macro commands per system
• Keeps a log of up to 1,000 events
• VISTAView-100 CCTV support
• Supports up to 16 two-wire smoke detectors on zone 1
• Supports up to 50 latching-type glassbreak detectors on zone 8
• Zone 7 may be used for keyswitch arming/disarming
• Integrates with WIN-PAK access control systems to provide increased users, event log and scheduling
• Supports V-Plex addressable VISTAKey access control (up to 15 doors and 500 cards)
• Easily programmed and maintained by the newly upgraded Compass Windows-based downloader
• Supports up to 96 programmable relays
• Supports the ADEMCO 4286 VIP Module
• Programmable to meet SIA false alarm prevention specifications. To meet UL approval for ANSI/SIA CP- 01-2000 order part number VISTA- 128SIA

New Enhancements:

• Upload/Download using AlarmNet devices
• CO detector support
• Two-way RS232 (facility automation software support) optional
• Supports eight numeric pager numbers
• Supports touchscreen Advanced User Interface (AUI)
• Smoke Detector Reset at keypad
• Panel linking up to eight panels
• Quick Exit
• Group Bypass
• Arm Faulted
• Event Arming
• Scheduled check-in
• Arm Stay by group

Additional Features

Additional Features Basic Hardwired Zones

• EOLR supervision (optional for zones 2-8) supporting N.O. or N.C. sensors (EOLR supervision required for fire and UL burglary installations)
• Individually assignable to one of 8 partitions
• Up to 16 two-wire smoke detectors on zone 1
• Four-wire smoke or heat detectors on zones 1-8 (power to four-wire smoke detectors must be supervised with an EOL device). Listed for residential fire only.
• Up to 50 two-wire latching glassbreak detectors on zone 8

Polling Loop Expansion
Supports up to 241 additional zones using a built-in polling (multiplex) loop interface. Polling loop zones have the following characteristics:

• Must use RPM (Remote Point Module) devices
• Supervised by control panel
• Individually assignable to one of 8 partitions
• Supports VSI module operation
• Supports 4297 Expander Module
• Maximum wiring distance - 12, 000 feet

Wireless Expansion
Supports up to 250 wireless zones using 5881 type RF receiver (fewer if using hardwire and/or polling loop zones). Wireless zones have the following characteristics:

Scheduling
Provides the following scheduling capabilities:

Eight Partitions
Provides the ability to control eight separate areas independently, each functioning as if it had its own separate control. Partitioning features include:

The feature-rich VISTA-40 Control Panel is a cost-effective solution for almost any application. Features include advanced partitioning, end-user simplicity and compatibility with the best wireless technology today.

A powerful control, the VISTA-40 can support residential installations and operate lights and appliances - providing you with greater installation flexibility  while offering your customers the ultimate in convenience.

Dependable features to meet your most demanding installations

• Nine hardwired zones, expandable to 64 zones
• Two partitions with seven authority levels
• 70 user codes
• 100 event alarm history log
• Two-way downloading
• Supports 16 two-wire smoke detectors and 16 keypads
• Three technology options:
  - Standard hardwired, expander 4208U (8 zones) 4190WH (2 zones)
  - ADEMCO polling loop addressable devices
  - Wireless (5800 series)
• Supports up to eight relays
• Supports X-10 transformer (Part No. 4300)
• Long Range Radio triggers (four)

• Wireless remote controls (featuring single button system operation):
  - 5804 - Four button programmable wireless key
  - 5804BD - Bi-directional four-button programmable wireless key with system status feedback
• Single or dual-button wireless personal panic:
  - 5802MN
  - 5802MN2
• Home automation activates lights, appliances, garage doors, and numerous other devices
• The Vista Interactive Phone Module (VIP) gives the end-user control of the system from any touchtone phone; the 4286 VIP responds in clear English, with over a 100 word vocabulary
• Full English display keypads clearly communicate system status and zone locations