Home > Shop Brands > Alpha Communications >

  Alpha Communications AY-NC369 On-Site UHF Paging Transmitter/Control Unit
Alpha Communications AY-NC369 On-Site UHF Paging Transmitter/Control Unit


 

Our Price : $3,498.13


Product Code: AY-NC369

Qty:

Description Specifications
 
The NC369 UHF Paging Transmitter receives alphanumeric messages and patient call information via serial interface and transmits the information directly to pagers. Information is sent at 9600 baud to minimize bottlenecks. Call type and location are determined by the system supplying information to the transmitter. Up to 1,000 pager IDs are supported. Battery backup is also available. Programming is simple using a PC or laptop and web based programming screens. Dipswitches are also available on the unit for minimal function onsite setup. The Unit is designed for on site paging requirements only and not for long range.

The range of the system will largely depend on the site and location of the transmitter unit. To determine the exact coverage, conduct a site survey. For estimation purposes of a properly located NC369, a range of up to one mile can be expected, under ideal conditions. The unit is supplied with a 1/4 wave BNC-terminated, antenna to provide coverage that meets most requirements. The optional CA133 Antenna is suited for installations that require good building penetration and range. On average, the CA133 Antenna adds about 25% to the transmission footprint, and because it comes with approximately 10 feet of cable, in can be mounted in more locations.
Features
  • Operates with NC300, NC300II, NC500, TC400 or other compatible system(s)
  • System covers a radius of up to one mile (site survey must be done to verify range)
  • 9600 baud serial input
  • Supports 1,000 individual pagerIDs
  • Supports numeric or alphanumeric pagers


Browse for more products in the same category as this item:

Shop Brands > Alpha Communications