Home >

 

Altronix AX-AL600ULM Multi-Output Access Control Power Supply/Charger



Altronix AX-AL600ULM Multi-Output Access Control Power Supply/Charger


 

Our Price : $360.22

UPC Code: 782239930852

Product Code: 51345

Qty:

Description
 

Multi-Output Access Control Power Supply/Charger

The AL600ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. The AL600ULM converts a 115VAC / 60Hz input into five individually regulated 12VDC or 24VDC power limited outputs (see specifications). Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.

UL Listed Fire and Access Control Power Supply (UL1481, UL294).
CSFM - California State Fire Marshal Approved.
MEA - NYC Department of Buildings Approved.
• NFPA 72 compliant.
• Class 2 rated.
• Input 115VAC / 60Hz, 1.9 amp.
• Field selectable 12VDC or 24VDC.
• 6 amps continuous supply current at 12VDC / 24VDC.
• Five (5) individual power limited outputs.
• Current limit is 2.5 amps @ 12VDC or 24VDC per output.
• Filtered and electronically regulated outputs, 100mV peak output voltage ripple.
• Maximum charge current .7 amp.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Thermal and short circuit protection with auto reset.
• AC input and DC output LED indicators.
• LEDs indicate condition of power outputs.
• Power & input trigger LED’s.
• AC fail supervision (form "C" contact).
• DC output supervision (form “C” contact).
• Battery fail and battery presence supervision (form "C" contact).
• Fire Alarm Panel or Access Control System trigger inputs.
(N.O. or N.C. supervised trigger input and polarity reversal trigger input (4mA draw from FACP).
• Power fail supervision relay (form “C” contact rated 1amp @ 28VDC / 115VAC).
• Output relay energizes when unit is triggered (form “C” contact rated 1amp @ 28VDC / 115VAC).
• Power supply is complete with enclosure, cam lock, transformer and battery leads.
• Enclosure accommodates up to two (2) 7AH batteries.
Enclosure dimensions: 13"H x 13.5"W x 3.25"D

Share your knowledge of this product with other customers... Be the first to write a review
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please