Home > Shop Brands > Altronix > CCTV >

 

Altronix HubWay8DI Passive UTP Transceiver Hub with Integral Camera Power, with isloated outputs



Altronix HubWay8DI Passive UTP Transceiver Hub with Integral Camera Power, with isloated outputs


 

Our Price : $491.11

UPC Code: 782239942091

Product Code: 1880956

Qty:

Description
 
With isloated outputs

Overview
Altronix HubWay8D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19 rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8D. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications
Individual selectable 24VAC or 28VAC power outputs with OFF position.
Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.
PTC protected outputs.
PTCs are rated @ 1 amp per channel.
Surge suppression.
Primary fuse (internal) is rated at 5 amp/250V.
Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp.
Data:
- RS422/RS485 data input.
Video:
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
AC input power indicator.
Eight (8) individual power LED indicators.
Illuminated master power disconnect circuit breaker with manual reset.
IEC320 - 3-wire grounded line cord (detachable).
Rack, wall or shelf mount.
Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
AC (HubWayAv) and/or DC (HubWayDv) Video Balun/Combiners required.
Lifetime Warranty.
Rack Chassis
Modular 1U standard EIA 19 rack mount chassis.
Dimensions: 1.625H x 19.125W x 8.5D.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Altronix > CCTV
Shop Brands > Altronix
CCTV / Surveillance > CCTV Accessories > Transmitters & Receivers
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please