The AW900T solutions offer the ideal combination of price, range, data rate, security, interference avoidance, quality-of-service, and ease-of-use.

Long-range 5.8 GHz wireless indoor Ethernet bridge.

AW5800iT Kit includes:

• 1 x AW5800xT outdoor radio
• 1 x 110 VAC to 6 VDC power adapters
• 1 x AW5-5800 5 dBi omni-directional antenna

Features:

• High RF output power and exceptional receive sensitivity provides ultra-longrange wireless Ethernet bridging up to 30 miles
• Does not interfere with Wi-Fi networks
• 128 bit encrypted with dynamic private keys
• Radio can be configured as an access point or client
• Install up to 16 clients per access point
• Highest Quality of Service (QoS) available — synchronous point-to-point protocol enables applications that require low data latency and jitter (surveillance video and VoIP)
• Simple plug and play — pre-configured as matched pairs with no user programming required
• 58 non-overlapping channels with frequency agility to avoid interference
• Does not require an FCC license to operate or install

Range:

• 300' 3-4 walls indoors

Antennae options:

• AW23-5800 directional
• AW5-5800 omni-directional

Specifications:

• RF transmission rate : 1.563 Mb/s
• Ethernet throughput : 935 Kb/s
• Output power : +21 dBm (20 Watts EIRP used with 23 dBi antennae AW23-5800)
• Receive sensitivity : -98 dBm at 10e-4 BER (-121 dBm with 23 dBi antennae AW23-5800)
• Radio link budget : 128 dB with 5 dBi antenna AW5-5800
                         - 164 dB with 23 dBi antennae AW23-5800
• Line-of-sight range : 1 mile LOS with 5 dBi antenna AW5-5800
                         - 40 miles LOS with 23 dBi antennae AW23-5800
• Radio channels/bandwidth : 58 non-overlapping with 2.0833 MHz spacing and 1.75 MHz occupied bandwidth
• Manual frequency select : Channel selected with DIP switch
• Connector types : RF RPTNC Female / Ethernet RJ45 10BaseT / Power Jack P5-2.1 mm ID
• Status LEDs : Power, Ethernet Link, RF RX, RF TX, 6/Channel, and 6/Link Quality
• Error correction technique : Sub-block error detection and retransmission
                         - SAW receiver filter attenuates cellular and pager interference
• Regulator type : Indoor uses linear regulator and outdoor uses switching regulator
• Power consumption : Transmit — 2.4 W ; Receive — 1.2 W
• Voltage : 5 VDC-7 VDC
• Temperature range : -40o C to 70o C
• Transmit current draw : 410 mA
• Size : 140 x 85 x 30 mm