Home > Shop Brands > Bosch Security >

  Bosch DS-FCP500CPK Photo-Electric Smoke Detectors 4-Wire Color Kit
Bosch DS-FCP500CPK Photo-Electric Smoke Detectors 4-Wire Color Kit


 

Our Price : $379.65


Product Code: DS-FCP500CPK

Qty:

Description
 
The FCP-500 Conventional Flush-mount Detectors are UL Listed, open area photoelectric smoke detectors. Use them with commercial fire protective signaling systems and household fire warning systems. The FCP-500 is available as a photoelectric smoke detector or as a multi-sensor detector with an additional carbon monoxide (CO) sensor. The detectors are ideal for areas where increased levels of dust and fibers are expected. Each type is offered in white or transparent with color inserts. The FCP-500 series smoke detectors satisfy the most demanding aesthetic requirements. Their ultra-low profile design offers flush ceiling mounting. The detectors and covers in the P versions are supplied with reversible printed color rings in 32 colors for individual color matching.

Technical Specifications:

Detection Principle:
FCP-500(-P) Scattered light measurement
FCP-500-C(-P): Combination of scattered light measurement and CO measurement
Drift Compensation:
All FCP-500 detectors: Drift compensation for smoke sensor baseline (optical sensors)
FCP-500-C(-P): Drift compensation for CO sensor
Environmental Considerations:
Air Speed: 300 ft/min (1.5 m/s) maximum
Humidity: 95% (non-condensing)
Interference Immunity: According to UL 268
Operating Temperature: +32 F to +100 F (0C to +38 C)
Protection Category: FAP-500(-C): IP 53 FAP-500(-C)-P: IP 33

Mechanical Properties:

Color:

Detector Housing: White, RAL 9003
Detector Front Plate: FCP-500(-C): signal white
FCP-500(-C)-P: transparent (color inserts) Dimensions (diameter x D)
Detector: 4.5 in. x 2.2 in. (11.4 cm x 5.6 cm)
Detector with Trim Ring: 5.9 in. x 2.2 in. (15 cm x 5.6 cm)
Detector with Trim Ring and Base: 5.9 in. x 2.75 in. (15 cm x 7 cm)
Material: Polycarbonate
Mounting Considerations: Area Monitored Refer to NFPA 72 Guideline
Mounting Height: Maximum: Refer to NFPA 72 Guidelines
Minimum: 9 ft (2.7 m)

False Ceiling:

Clearance (minimum): 6 in. (15.2 cm) with tolerances of -0.0625 in. (1.6 mm) and +0.1875 in. (4.8 mm)
Mounting Hole: 5.0625 in. (12.9 cm)
Thickness (maximum): 1.25 in. (3.2 cm)

Outputs Alarm:

Output Alarm output through normally-open (NO) relay in FCA-500 base. An alarm resistance of 0 ? or 680 ? in series to the relay can be chosen.
Relay Rating: 1 A at 30 VDC
Reset Time The detector resets if power is interrupted for at least 2 sec.

Display:

Two-color LED: Red = alarm, green = test mode, normal
Remote LED: Normally-open (NO) relay connects ground through 1.5 k?, 20 mA maximum Trouble
Output: Trouble output through normally-closed (NC) relay in FCA-500 base
Relay Rating: 1 A at 30 VDC

Power Requirements:

Current Consumption:

FCA-500 Base Alarm: 47 mA Standby: 3.5 mA
FCA-500-E Base Alarm: 47 mA Standby: 24 mA

Operating Voltage:

Four-wire: 9.7 VDC to 30 VDC
Features
  • Modern, ultra-low profile design
  • Color inserts match the surrounding decor
  • Smooth, easily-cleaned detector surface
  • Innovative retention mechanism
  • High reliability
  • Four-wire technology
  • Compatible with 12 VDC or 24 VDC systems
  • 30 ft (9 m) spacing between detectors
  • Optional carbon monoxide (CO) sensor for false alarm reduction
  • Dual color LED

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please