Home > Shop Brands > Bosch Security >

  Bosch DS-FCP500EK Flush Smoke Mount Detectors
Bosch DS-FCP500EK Flush Smoke Mount Detectors


 

Our Price : $320.28


Product Code: DS-FCP500EK

Qty:

Description
 
The FCP-500 Conventional Flush-mount Detectors are UL Listed, open area photoelectric smoke detectors. Use them with commercial fire protective signaling systems and household fire warning systems (see NFPA 72, the National Fire Alarm Code). The FCP-500 is available as a photoelectric smoke detector or as a multi-sensor detector with an additional carbon monoxide (CO) sensor. The detectors are ideal for areas where increased levels of dust and fibers are expected. Each type is offered in white or transparent with color inserts. The FCP-500 series smoke detectors satisfy the most demanding aesthetic requirements. Their ultra-low profile design offers flush ceiling mounting. The detectors and covers in the P versions are supplied with reversible printed color rings in 16 colors for individual color matching.Linking the optical sensors and the CO sensor results in an extremely high tolerance to unwanted alarms. Consequently, the detector can be used in places where the work carried out gives rise to small amounts of nonfire-related smoke, steam, or dust.

Optical (Smoke) Sensor (all models): The optical sensor operates according to the scattered light method. The LEDs transmit pulsed infrared light at a defined angle into the scattered light area. If a fire occurs, the light is scattered by the smoke particles and strikes the photo diodes that transform the quantity of light into a proportional electrical signal. Interference effects from daylight and commercial lighting sources are filtered out with an optical daylight filter and by using electronic filtering and rectification algorithms. The detector's various diodes (light-emitting and photo) are individually controlled by the detector's electronics. Independent signal combinations are produced that are ideal for detecting smoke, making it possible to differentiate between smoke and interference agents (insects, objects). In addition, the detector's programming checks the plausibility of the timing and correlation of sensor signals making it possible to detect errors in the analysis electronics or the LEDs.

Specifications:

Detection Principle:
FCP-500(-P): Scattered light measurement
FCP-500-C(-P): Combination of scattered light measurement and CO measurement

Drift Compensation:
all FCP-500 detectors: Drift compensation for smoke sensor baseline(optical sensors)
in addition, for FCP-500-C(-P): Drift compensation for CO sensor

Environmental Considerations:
Air Speed: 300 ft3/min (8.5 m3/min) maximum
Humidity: 95% (non-condensing)
Interference Immunity: According to UL 268
Operating Temperature: +32 F to +100 F
Protection Category: FAP-500(-C): IP 53
FAP-500(-C)-P: IP 33

Mechanical Properties:

Color:

Detector Housing: Signal white, RAL 9003
Detector Front Plate: FCP-500(-C): signal white
FCP-500(-C)-P: transparent (color inserts)
Dimensions (diameter x D)
Detector: 4.5 in. x 2.2 in. (11.4 cm x 5.6 cm)
Detector with Trim Ring: 5.9 in. x 2.2 in. (15 cm x 5.6 cm) Detector with Trim Ring and
Base: 5.9 in. x 2.75 in. (15 cm x 7 cm)
Material: Polycarbonate

Mounting Considerations:

Area Monitored: Refer to NFPA 72 Guideline
Mounting Height: Maximum: Refer to NFPA 72 Guidelines
Minimum: 8.8 ft (2.7 m)

False Ceiling:

Clearance (minimum): 6 in. (15.2 cm) with tolerances of -0.0625 in. (1.6 mm) and +0.1875 in. (4.8 mm)
Mounting Hole: 5.0625 in. (12.9 cm)
Thickness (maximum): 1.25 in. (3.2 cm)

Outputs:

Alarm:

Output: Alarm output through normally-open (NO) relay in FCA- 500 base. An alarm resistance of 0 ? or 680 ? in series to the relay can be adjusted
Relay Rating: 1 A at 30 VDC
Reset Time: The detector resets if power is interrupted for at least 2 sec
Display: Two-color LED: Red = alarm, green = test mode
Features
  • Modern, ultra-low profile design
  • Color inserts match the surrounding decor
  • Smooth, easily-cleaned detector surface
  • Innovative retention mechanism
  • High reliability
  • Four-wire technology
  • Compatible with 12 VDC or 24 VDC systems
  • 30 ft (9 m) spacing between detectors
  • Optional carbon monoxide (CO) sensor for false alarm reduction
  • Dual color LED

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please