Bosch DS-ISCBLD2WP Blue Line Gen2 Pet Friendly TriTech

Home > Shop Brands > Bosch Security >

Our Price : $25.99

Product Code: DS-ISCBLD2WP

DISCONTINUED.

Description

The ISM-BLD1-P Pet Friendly TriTech Detectors use a combination of passive infrared (PIR) and microwave detection technologies. With advanced signal processing and these detection technologies, the detectors generate alarms for human intruders without generating false alarms for pets. These small unobtrusive detectors are simple to install and do not need field adjustments. First Step Processing (FSP) almost instantly responds to human targets without producing false alarms from other sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. This eliminates the need for the installer to select the sensitivity level. Each sensor (PIR and microwave) processes signals individually, and both sensors must agree there is an alarm before the alarm relay activates.

Supervised Microwave:
The microwave circuit is fully supervised. If the microwave subsystem fails, the PIR subsystem provides single technology coverage.
Pet Immunity (not tested by UL)
The detector can distinguish between signals caused by humans and signals caused by pets. It ignores signals caused by one or two pets up to 45 kg (100 lb) or numerous rodents.

Draft and Insect Immunity:
The sealed optical chamber prevents drafts and insects from affecting the detector.

Temperature Compensation:
The detector adjusts its sensitivity to maintain its ability to identify human intruders at critical temperatures.

Mounting:
The recommended mounting height is 2.3 m to 2.7 m (7.5 ft to 9 ft).

The detector can be mounted:
On a flat wall (surface, semi-flush) with the optional B335 Swivel-mount Bracket, or with the optional B328 Gimbal-mount Bracket,
In the junction of two perpendicular walls, or On the ceiling with the optional B338 Ceiling-mount Bracket.

Specifications:

Environmental Considerations:
Relative Humidity: 0 to 85%, non-condensing
Temperature (operating): -29°C to +49°C (-20°F to +120°F) For UL Listed product installations, 0°C to +49°C (+32°F to +120°F)

Mechanical Properties:
Color: White
Dimensions: 13.2 cm x 6.1 cm x 4.8 cm (5.2 in. x 2.4 in. x 1.9 in.)
Material: High-impact ABS plastic:
Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at field strengths less than 50 V/m.

Outputs:
Digital Alarm: 5 V normally, ground for 4 sec during alarm.
Relay: Solid state, supervised Form A normally-closed(NC) contacts rated for 125 mA, 28 VDC, 3 W.
Tamper: Normally-closed (NC) contacts (with cover on) rated at 28 VDC, 125 mA maximum. Connect tamper circuit to 24-hour protection circuit.

Power Requirements:
Current (Alarm): 22 mA
Current (Standby): 15 mA maximum at 12 VDC
Voltage (Operating): 10 VDC to 14 VDC