Home > Shop Brands > Bosch Security > CCTV > B&W / Monochrome Cameras >


Bosch / Detection Systems LTC 0510/60 - DinionXF Monochrome Camera 1/2-inch B/W high performance EIA, 570 TVL, 85-265 VAC, 60 Hz

Bosch / Detection Systems LTC 0510/60 - DinionXF Monochrome Camera 1/2-inch B/W high performance EIA, 570 TVL, 85-265 VAC, 60 Hz


Our Price : $665.23

Product Code: 520255

Call for availability

Dinion XF 1/2" Monochrome Box Camera (Hi Res) (AC Only)

The LTC 0510 Series of High Performance 1/2-inch Digital CCD Monochrome Cameras create the best possible image, even under the most difficult light and scene conditions. Based on unique 15-bit digital video processing technology and employing XF-Dynamic, these cameras provide the ultimate sensitivity with extended dynamic range. By employing the best 1/2-inch CCD available, advanced front end processing, combined with the outstanding Dinion DSP, the cameras achieve an astonishing sensitivity, providing better images in low light situations and sharper daytime images.

All Dinion cameras are supplied ready to operate. Simply attach and focus the lens, and connect power to provide optimal pictures under virtually all scene conditions. No tools are required for back focus and power connection. For extra challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and On-screen Display (OSD). Also, to aid installation, the camera automatically detects the lens type, and using the Lens Wizard ensures accurate (back) focusing for perfectly sharp pictures at all times.

Extended dynamic range is brought to a new level on the LTC 0510 Series Camera by XF-Dynamic technology. XFDynamic automatically processes the highly accurate 15-bit digital signal to optimally capture the detail in both the highlight and lowlight areas of the scene simultaneously, to maximize the information visible in the picture.

Bilinx Technology
The LTC 0510 series cameras incorporate Bilinx. Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. With Bilinx technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate setup and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.

Video Motion Detection
The built-in video motion detector allows you to select up to four fully programmable areas with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting. When motion is detected alarms may be displayed in the video signal, the output relay can be closed in addition to alarm message transmission on Bilinx.

Auto Black
The automatic black level feature, enhances contrast by removing veiling glare from the picture or when contrast is reduced by fog or mist.

Default Shutter
When viewing moving objects a fast shutter speed is required. When using a fast shutter speed the lens opening or gain control needs to be increased to maintain the video signal. The camera sensitivity is limited by the fast shutter speed. The default shutter setting of the LTC 0510 offers the best of all worlds, fast shutter speed as long as there is sufficient light, however as the light level falls, when other adjustments have been exhausted, the shutter reverts to the standard setting maintaining the cameras excellent sensitivity.

Back Light Compensation (BLC)
Offering a fully programmable BLC area of interest, and a variable BLC level, the camera can be easily set up for even the most challenging entrance applications.

Lens Wizard
The LTC 0510 series automatically detects the type of lens installed. The Lens Wizard will focus the lens at the maximum lens opening, to ensure that focus is maintained throughout the entire 24-hour day/night cycle. No special tools or filters are required.

Programmable Modes
The camera supports 3 independent operating modes. The 3 modes are preprogrammed for typical applications, but are fully programmable for individual situations. Switching between modes is easy via Bilinx or the external alarm input.

By increasing the integration time on the CCD up to 10 times, the effective sensitivity is dramatically enhanced, especially useful where there is no artificial lighting and you rely on the moon, stars and scattered radiation.

Model No. Voltage Range   System
LTC 0510/10 11-39 VDC
12-28 VAC
45-65 Hz CCIR
LTC 0510/20 11-39 VDC
12-28 VAC
45-65 Hz EIA
LTC 0510/50 85-265 VAC 45-65 Hz CCIR
LTC 0510/60 85-265 VAC 45-65 Hz EIA
Power Consumption 4 W
Imager Interline transfer CCD
1/2-inch Image format
Active Pixels
PAL Models: 752 H x 582 V
NTSC Models: 768 H x 492 V
Sensitivity (3200 k)
Sensitivity (Full Video) 0.16 lux (0.016fc)
Sensitivity 50 IRE 0.032 lux (0.0032 fc)
Minimum illumination 0.021 lux (0.0021 fc)
Minimum illumination with SensUp 0.0021 lux (0.00021 fc)
Horizontal Resolution 570 TVL
Signal-to-Noise Ratio > 50 dB
Video Output 1 Vpp, 75 ohm
Synchronization Internal, line lock or genlock selectable
Electronic Shutter Auto (1/60 (1/50) to 1/500000), fixed,
flickerless, default
Sensitivity up Off, automatic continuous up to 10x
Auto Black On, off selectable
Range 32x dynamic range enhancement
Dynamic Noise Reduction Auto, off selectable
Contour Sharpness enhancement level selectable
BLC Off, area and level selectable
Gain Auto (maximum level selectable to 28 dB) or fixed level
VMD 4 area, sensitivity selectable
Alarm Output VMD or Bilinx
Alarm Input (TTL) Profile switching, +5 V nominal, +40 VDC max.
Alarm Output
max. 30 VAC or +40 VDC, max. 0,5 A
continuous, 10 VA
External Synchronal Input 75 ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers
(automatic set-up in combination with coaxial
Camera ID 16 character editable string, position selectable
Lens Types Manual, DC- and Video-iris auto-detect with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 0.5 VDC, max. 50 mA continuous
Remote Control Bi-directional coaxial communication
(H x W x D)
59 x 67 x 122 mm (2.28 x 2.6 x 4.8 inch)
without lens
Weight 450 g (0.99 lbs) without lens
Tripod Mount Bottom (isolated) and top 1/4-inch 20 UNC
Lens Mount C and CS
Controls OSD with softkey operation
Operating Temperature -20 C to +50 C(-4 F to +122 F)
Storage Temperature -25 C to +70 C(-13 F to +158 F)
Operating Humidity 20% to 93% RH
Storage Humidity up to 98% RH

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security > CCTV > B&W / Monochrome Cameras

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please