Home > Shop Brands > Bosch Security > CCTV > Color Cameras >

 

Bosch / Detection Systems LTC 0620/61 - DinionXF Day Night Camera 1/2-inch, high performance, 540 TVL, NTSC, DSP, 85 265 VAC, 60 Hz



Bosch / Detection Systems LTC 0620/61 - DinionXF Day Night Camera 1/2-inch, high performance, 540 TVL, NTSC, DSP, 85 “ 265 VAC, 60 Hz


 

Our Price : $521.08

UPC Code: 800549062138

Product Code: 520261

Call for availability

Description
 


The Bosch LTC0620-61 high performance color security camera runs on 85-265 VAC power and incorporates special features for ease of setup and operation. When light levels fall, this camera uses an IR cut filter to switch from color to a high resolution B/W mode, providing dependable security 24-hours a day. Camera settings can be accessed locally via the camera's operator-friendly, on-board display or from a remote location using Bilinx technology to tap into the video cable to check status, change camera controls, and even update firmware.

Note:Lens not included, accepts C/CS mount lenses.

Key Features


Day/Night

Uses an IR filter to auto switch from color to B/W when light levels fall below a certain value. Switching can also be done manually via the alarm input, through the camera menu or using the Bilinx coaxial control interface.

15-Bit DSP, XF-Dynamic

Records a high resolution of 540 lines and uses 15-Bit Digital Signal Processing along with XF-Dynamic for optimum performance in difficult lighting environments.

Default Shutter

Employs a high speed shutter to record fast moving objects. When light levels fall, the shutter reverts to its standard mode.

Motion Detection

Features a built-in motion detector, configurable for 4 areas with individual thresholds. A global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting.

Auto Iris

Accepts optional, auto iris Video and DC lenses for installation in areas with changing lighting conditions.

Lens Wizard

A built-in lens wizard function automatically detects the type of lens installed, allowing a technician to easily adjust the lens settings and focus without requiring special tools or filters.

Bilinx Technology

Bilinx is a bi-directional communication protocol embedded in the camera's standard video signal. This allows a technician to check status, change camera settings and even update firmware from virtually anywhere along the video cable. This signal is also used to transmit alarm and status messages, providing superior performance without additional installation steps.

3-Year Warranty

Covered by a 3-year manufacturer's warranty.


Application

Security Surveillance

Image Sensor

1/2" Color CCD

Signal System

NTSC (EIA)

Lens

Not included, accepts C/CS mount lenses.

Number of Pixels

768 x 492

Horizontal Resolution

570 Lines

Minimum Illumination

1.4 Lux

Controls

Auto Gain
Electronic Shutter
Dynamic Noise Reduction
Backlight Compensation
Contour
Range
Auto Black
Sensitivity Up
Night Sense

Iris Operation

DC, Video or manual

Alarm I/O

Alarm Output: VMD or Bilinx
Alarm Input (TTL): Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay: max. 30 VAC or +40 VDC, max. 0,5 A continuous, 10 VA

Signal-to-Noise Ratio

50 dB

Signal Connectors

BNC x1
S-Video x1

Sync

Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable

Power Requirements

85-265 VAC

Power Consumption

4W

Operating Temperature

-4 - 122 F
-20 ~ +50 C

Dimensions (WxHxD)

2.6 x 2.2 x 4.8"
66 x 58 x 122mm

Weight

0.99 lb
0.45 kg

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security > CCTV > Color Cameras
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please