You are here: Home > CCTV / Surveillance > Housings & Mounts > Bosch
We found 5 results matching your criteria.
Bosch Housings & Mounts Cables enter the housing through water-tight openings in the bottom rear of the housings
Sort By:
Page of 1
Bosch / Detection Systems HSG9483/00 - INDOOR CAMERA HOUSING NO HEATER Bosch / Detection Systems HSG9483/20 - HOUSING OUTDOOR (IP55/NEMA 3R) FOR CAMERA/LENS TO 103 INCH 24VAC 50/60Hz HEATER.

The Bosch HSG948300 is a stylish indoor housing designed to accommodate various security camera and lens combinations including Bosch's line of Dinion cameras equipped with up to a 15x motorized zoom lens. Access to camera and lens controls is via a hinged side opening which can be secured in place using the supplied tamper-resistant screws. Camera cables enter the housing via water-tight openings on the bottom of the housing or through wider holes in the base for easier cable management. Mounting holes in the base offer compatibility with a wide range of fixed and adjustable mounting brackets.

Key Features


Accommodates Most Cameras

Accommodates most camera and lens combinations including the Bosch Dinion line of security cameras with up to 15x motorized zoom lenses.

Tamper Resistant

The housing features an aluminum casing and includes tamper resistant screws for securing its side hinge into place.

Easy Camera Access

A hinged side opening offers easy access to camera and lens controls.

Water-Tight Cable Entry

Cables enter the housing via water-tight fittings in the bottom rear of the housing. In cases where water entry is not a concern, cables can be attached using a wider opening in the base.

Compatible with Various Mounts

Mounting holes in the base allows its use with a wide range of fixed and adjustable mounting brackets.


Construction

Aluminum housing casing, neoprene gaskets, UV-resistant polymer end-caps, and all stainless steel hardware

Color

Gray

Maximum Camera/Lens Size (WxHxD)

3.2 x 3.5 x 12.5" (81 x 89 x 317mm)

Dimensions (HxD)

5.2 x 17" (130 x 433mm)

Weight

4.3 lb (2 kg)

The Bosch HSG948320 is a stylish and rugged camera housing designed for outdoor installation. It uses a sun-shield and built-in heater to keep the camera protected in rain, sun and cold weather conditions. The housing accommodates various camera and lens combinations including the Bosch Dinion line of security cameras with up to a 15x motorized zoom lens attached. Access to camera and lens controls is via a hinged side panel which can be secured in place using the supplied tamper resistant screws. Cables enter the housing through water-tight openings in the bottom rear of the housing or through wider openings in the base. Mounting holes in the base allow its use with a wide range of fixed and adjustable mounting brackets.

Key Features


Accommodates Most Cameras

Protects camera and lens combinations up to 10.3" (262mm) in length.

Built-In Heater and Sun-Shield

IP-55 and NEMA-3R rated for outdoor use with a built-in heater and sun-shield keeping the camera protected in rain, sun and cold weather conditions.

Easy Camera Access

A hinged side panel offers easy access to the camera and lens.

Tamper-Resistant

The housing is built of aluminum and advanced polymer construction with its side hinge panel secured in place using the supplied tamper-resistant screws.

Water-Tight Cable Entry

Cables enter the housing through water tight openings. If water entry is not a concern, cables can be attached through a wider opening in the base.

Compatible with Mounting Brackets

Various drill holes on the base allows its use with a wide range of fixed and adjustable mounting brackets.


Construction

Aluminum housing casing, neoprene gaskets, UV-resistant polymer end-caps, and all stainless steel hardware with supplied tamper-resistant locking clasp screws

Color

Gray

Maximum Camera/Lens Size (WxHxD)

3.2 x 3.5 x 10.3" (81 x 89 x 262mm)

Power Requirements

24 VAC

Operating Temperature

With Fixed Lens: -40 ~ +122 F (-40 ~ +50 C)
With Zoom Lens: -22 ~ +122 F (-30 ~ +50 C)

Dimensions (WxHxD)

4.7 x 5.2 x 18.9" (119 x 130 x 480mm)

Weight

6.1 lb (2.8 kg)
Bosch / Detection Systems HSG9483/21 - HOUSING OUTDOOR (IP55/NEMA 3R) FOR CAMERA/LENS TO 103 INCH 24VAC 50/60Hz HEATER/BLOWER. Bosch / Detection Systems HSG9483/22 - HOUSING OUTDOOR (IP55/NEMA 3R) FOR CAMERA/LENS TO 103 INCH 24VAC 50/60Hz w/HTR/BLWR BNC 4pin CONNECTOR.

The Bosch HSG948321 is a stylish, rugged camera housing designed for outdoor use with a built-in heater and blower keeping the camera protected from extreme weather conditions. The housing accommodates various camera and lens combinations including the Bosch Dinion line of security cameras with up to a 15x motorized zoom lens attached. Access to camera and lens controls is via a hinged side panel which can be secured in place using the supplied tamper resistant screws. Cables enter the housing through water-tight openings in the bottom rear of the housing or through wider openings on the base. Mounting holes in the base allow its use with a wide range of fixed and adjustable mounting brackets.

Key Features


Built-In Heater/Blower and Sun-Shield

A built-in heater in combination with a continuous running blower keeps the camera protected from extreme temperatures and prevents the viewing window from fogging up. Additionally, this housing includes a sun-shield for installation in direct sunlight.

Accommodates Most Cameras

Protects camera and lens combinations up to 10.3" (262mm) in length.

Easy Camera Access

A hinged side panel offers easy access to the camera and lens.

Tamper-Resistant

The housing features an aluminum and advanced polymer construction with its side hinge panel secured in place using the supplied tamper-resistant screws.

Water-Tight Cable Entry

Cables enter the housing through water tight openings. If water entry is not an issue, cables can be attached through a wider opening in the base.

Compatible with Mounting Brackets

Various drill holes on the base allows its use with a wide range of fixed and adjustable mounting brackets.


Construction

Aluminum housing casing, neoprene gaskets, UV-resistant polymer end-caps, and all stainless steel hardware with supplied tamper-resistant locking clasp screws

Color

Gray

Maximum Camera/Lens Size (WxHxD)

3.2 x 3.5 x 10.3" (81 x 89 x 262mm)

Power Requirements

24 VAC

Operating Temperature

Maintains Internal Temperature

With Fixed Lens: -4 - 131 F (-20 ~ +55 C)
With Zoom Lens: 14 - 131 F (-10 ~ +55 C)

Dimensions (WxHxD)

4.7 x 5.2 x 18.9" (119 x 130 x 480mm)

Weight

6.4 lb (2.9 kg)

In addition to a built-in fan and blower, the Bosch HSG948322 outdoor camera housing features external ports for attaching BNC video and power cables. The housing accommodates various camera and lens combinations including the Bosch Dinion line of security cameras with up to a 15x motorized zoom lens attached. Access to camera and lens controls is via a hinged side panel which can be secured in place using the supplied tamper resistant screws. Mounting holes in the base allow its use with a wide range of fixed and adjustable mounting brackets.

Key Features


External Video and Power Ports

Features external ports for connecting 4-pin power and BNC video cables.

Built-In Heater/Blower and Sun-Shield

A built-in heater in combination with a continuous running blower keeps the camera protected from extreme temperatures and prevents the viewing window from fogging up. Additionally, this housing includes a sun-shield for installation in direct sunlight.

Accommodates Most Cameras

Houses camera and lens combinations up to 10.3" (262mm) in length.

Easy Camera Access

A hinged side panel offers easy access to the camera and lens.

Tamper-Resistant

The housing features an aluminum and advanced polymer construction with its side hinge panel secured in place using the supplied tamper-resistant screws.

Water-Tight Cable Entry

Cables enter the housing through water tight openings. If water entry is not an issue, cables can be attached through a wider opening in the base.

Compatible with Mounting Brackets

Various drill holes on the base allows its use with a wide range of fixed and adjustable mounting brackets.


Construction

Aluminum housing casing, neoprene gaskets, UV-resistant polymer end-caps, and all stainless steel hardware with supplied tamper-resistant locking clasp screws

Color

Gray

Maximum Camera/Lens Size (WxHxD)

3.2 x 3.5 x 10.3" (81 x 89 x 262mm)

Power Requirements

24 VAC

Operating Temperature

Maintains Internal Temperature

With Fixed Lens: -4 - 131 F (-20 ~ +55 C)
With Zoom Lens: 14 - 131 F (-10 ~ +55 C)

Dimensions (WxHxD)

4.7 x 5.2 x 18.9" (119 x 130 x 480mm)

Weight

6.4 lb (2.9 kg)
Bosch / Detection Systems HSG9483/61 - HOUSING OUTDOOR (IP55/NEMA 3R) FOR CAMERA/LENS TO 103 INCH 115VAC 60Hz HEATER/BLOWER.

The Bosch HSG948361 is a stylish, rugged camera housing designed for outdoor use with a built-in heater and blower keeping the camera protected from extreme weather conditions. The housing accommodates various camera and lens combinations including the Bosch Dinion line of security cameras with up to a 15x motorized zoom lens attached. Access to camera and lens controls is via a hinged side panel which can be secured in place using the supplied tamper resistant screws. Cables enter the housing through water-tight openings in the bottom rear of the housings. Mounting holes in the base allow its use with a wide range of fixed and adjustable mounting brackets.


Key Features


Built-In Heater/Blower and Sun-Shield

A built-in heater in combination with a continuous running blower keeps the camera protected from extreme temperatures and prevents the viewing window from fogging up. Additionally, this housing includes a sun-shield for installation in direct sunlight.

Accommodates Most Cameras

Protects camera and lens combinations up to 10.3" (262mm) in length.

Easy Camera Access

A hinged side panel offers easy access to the camera and lens.

Tamper-Resistant

The housing features an aluminum and advanced polymer construction with its side hinge panel secured in place using the supplied tamper-resistant screws.

Water-Tight Cable Entry

Cables enter the housing through water tight openings. If water entry is not a concern, cables can be attached through a wider opening in the base.

Compatible with Mounting Brackets

Various drill holes on the base allows its use with a wide range of fixed and adjustable mounting brackets.


Construction

Aluminum housing casing, neoprene gaskets, UV-resistant polymer end-caps, and all stainless steel hardware with supplied tamper-resistant locking clasp screws

Color

Gray

Maximum Camera/Lens Size (WxHxD)

3.2 x 3.5 x 10.3" (81 x 89 x 262mm)

Power Requirements

115 VAC

Operating Temperature

Maintains Internal Temperature

With Fixed Lens: -4 - 131 F (-20 ~ +55 C)
With Zoom Lens: 14 - 131 F (-10 ~ +55 C)

Dimensions (WxHxD)

4.7 x 5.2 x 18.9" (119 x 130 x 480mm)

Weight

6.4 lb (2.9 kg)
   
 
Bosch Housings & Mounts
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please