Home > Shop Brands > Bosch Security >

  Bosch PB-498V2820N Outdoor IP & Day/Night Camera 2.8-11MM
Bosch PB-498V2820N Outdoor IP & Day/Night Camera 2.8-11MM


 

Our Price : $1,080.00


Product Code: PB-498V2820N

Qty:

Description
 
The Bosch KBE-498V28-20N Outdoor IP & Day/Night Camera (2.8-11mm) includes an NBN-498-21P Dinion2x Day/Night IP Camera, an LTC 3664/40 Varifocal Lens, and an LTC 9215/00 Indoor/Outdoor Mount.

The NBN-498-21P Day/Night IP Camera with a 1/3" high-resolution imager provides high-quality imagery at a horizontal resolution up to 540TVL. It features a 20-bit digital signal processing technology that improves the sensitivity, and the 2x dynamic technology doubles the dynamic range, thus providing detailed images. The Bilinx technology enables you to change the camera settings, check status, and update firmware from anywhere via the coaxial cable. In addition, the technology uses the standard video cable to transmit alarm and status messages, improving the overall performance of the camera and reducing the service/installation time. With the SmartBLC feature, the IP camera adjusts video gain to correct the exposure when the object being captured is in front of a bright light source.

With H.264 compression, bandwidth throttling, and multicasting capabilities, the Dinion2X Day/Night IP Camera resourcefully handles bandwidth and storage requirements, while offering high picture quality and resolution. The M-JPEG video stream offers easy coalition with other JPEG or M-JPEG-compatible video management systems.

Built-in Motion+ video motion analysis system is an ideal solution for applications, where examination of basic video content is required. The motion analysis algorithm is based on pixel change, and incorporates object size filtering capabilities and advanced tamper-detection capabilities. The Dinion2X Day/Night IP Camera is compliant with ONVIF (Open Network Video Interface Forum), which enables exchange and use of information between network video products to exchange live video, audio, metadata, and control information, and the systems are auto detected and connected to video management systems.

Integrated IR filter automatically switches from color to monochrome either by sensing the illumination level or through the alarm input. With Default Shutter, the camera can capture high speed moving objects when sufficient light is available, and the shutter speed returns to default value under low-light conditions to maintain sensitivity. The SensUp Dynamic feature improves the sensitivity by increasing the integration time up to 10 times on the CCD.

IP66-rated weatherproof, vandal-resistant housing ensures uninterrupted surveillance in exposed and high-risk locations. The camera and lens are pre-wired into a housing that has a feed-through wall mount. The outdoor camera includes a heater and blower to maintain the internal temperature of the unit and a sunshield to protect the unit from direct sunlight.

The LTC 3664/40 Varifocal Lens offers a focal length ranging from 2.8-11mm for 1/3" image sensors. It features a maximum aperture (f-stop) of f/1.4-360 that ensures high-quality images even in low-light conditions. In addition, manual focus and zoom control allow precise focusing of objects. The lens is equipped with a DC-iris control connection that is a 4-pin standard plug that connects directly to the camera's iris output. The lens has a CS lens mount and comes with a robust construction that is ideal for use with surveillance cameras.

The LTC 9215/00 Indoor/Outdoor Mount can easily hold fixed camera or camera housing installations weighing up to 20 lb (9 kg). Made of lightweight aluminum and with a welded construction, the mount is corrosion-resistant and suitable for rigid environments. The versatile swivel head adds flexibility by rotating up to 360 and providing tilt up to 180. Tubular feed-through design hides the cable that runs from the mounting head to the mounting surface, thus deterring vandals and thieves from cutting the wires.

Specifications:

Camera:

Signal System: NTSC
Image Sensor: 1/3" Interline transfer CCD
Number of Pixels: 768 x 494
Horizontal Resolution: 540 TVL

Minimum Illumination:

-Scene Illumination (50 IRE): 0.65 lux (0.065 fc)
-Scene Illumination/ Full Video (100 IRE): 2.6 lux (0.26 fc)

NightSense:

-Scene Illumination (50 IRE): 0.26 lux (0.026 fc)
-Scene Illumination/ Full Video (100 IRE): 1.04 lux (0.104 fc)

Controls:

-Day/Night: Color, Mono, Auto
-Modes: 6 preset programmable modes
-Dynamic range: 120 dB (20-bit image processing)
-Signal-to-Noise Ratio: > 50 dB
-Dynamic engine: 2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dynamic
-SmartBLC: On (includes 2X-Dynamic ) / Off
-AGC: AGC On or Off (0 - 30 dB) selectable
-White Balance: ATW (2500 to 10000K), ATWhold and manual
-Shutter: Auto (1/60 to 1/10000) selectable / Auto (1/60 to 1/50000) automatic flickerless, fixed selectable
-Sensitivity up: Adjustable from Off up to 10x
-Auto Black: Automatic continuous, Off
-Dynamic Noise Reduction: Auto, On/off selectable
-Sharpness: Sharpness enhancement level selectable
-Peak White Invert: On/Off
-Privacy Masking: Four independent areas, fully programmable
-Video Motion Analysis: Motion+
-Test Pattern Generator: Color bars 100%, Grayscale 11-step, Sawtooth2H, Checker board, Cross hatch, UV plane
-Synchronization: Internal, Line Lock selectable
-Lens Mount: CS (max lens protrusion, 0.2" (5 mm), C mount compatible with supplied adapter ring
-Lens Types: Manual, DC- and Video-Iris auto-detect with override / DC-iris drive: max. 50 mA continuous / Video-iris: 11.5 VDC 0.5, max. 50 mA continuous
-Controls: OSD with soft-key operation (multi-lingual)

Audio:

-Standard: G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate
-Signal-to-noise ratio: > 50 dB

Audio:

-I/O Audio: 1 x mono line in, 1 x mono line out
-Connector: 3.5 mm stereo jack
-Signal line in: 9 kOhm typical, 5.5 Vpp max
-Signal line out: 3.0 Vpp at 10 kOhm typical, 2.3 Vpp at 32 Ohm typical, 1.7 Vpp at 16 Ohm typical

Power Requirements: 21 to 28 VAC, 60 Hz, 45 W, Power-over-Ethernet
Operating Temperature: -4 to 122F (-20 to 50C)
Dimensions (HxWxL): 2.3 x 2.6 x 4.8" (58 x 66 x 122 mm) - without lens
Weight: 1.2 lb (542 g) - without lens

Housing:

Construction: Aluminum housing casing, neoprene gaskets, UV-resistant polymer end caps, and all stainless steel hardware
Finish: Gray
Window: 0.12" (3mm) Thick UV-stabilized polycarbonate
Mounting: Four (4), 5/16" (8mm) diameter fasteners (not included) are required for mounting
Weight: 9.04 lb (4.1 kg)

Lens:

Image Format: 1/3" (IR)
Focal Length: 2.8-11 mm
Iris Range: for 1.4-360
Focus Range: 1.1' (0.35m)
Back Focal Distance: 0.34" (8.6mm)
Lens Mount: CS

Angle of View:

-Wide: 97.4 x 72.4
-Tele: 26.2 x 19.7

Iris Control: 4-pin, DC control
Focus/Zoom: Manual
Weight: 0.17 lb (79 g)

Mount:

Type: Feed-through Wall Mount
Maximum Load: 20 lb (9 kg)
Mounting Head: Adjustable 360 pan, 180 tilt
Finish: Light gray
Weight: 0.9 lb (0.4 kg)
Features
  • 1/3" color progressive scan CCD sensor and PoE to deliver clear images at a horizontal resolution up to 540TVL
  • 20-bit image processing captures picture in both bright highlights and deep shadows at the same time
  • Wide Dynamic Range provides clear images even under backlight conditions where intensity of illumination varies excessively
  • Auto Black enhances the visibility of details in low contrast scenarios such as mist, fog, etc.
  • SmartBLC feature adjusts video gain to correct the exposure when the object being captured is in front of a bright light source
  • H.264 compression, bandwidth throttling, and multicasting capabilities resourcefully handle bandwidth and storage requirements, while offering high picture quality and resolution
  • Tri-stream video feature allows the camera to generate 2 independent H.264 streams and 1 M-JPEG stream at the same time
  • M-JPEG video stream offers easy coalition with other JPEG or M-JPEG-compatible video management systems
  • Motion+ video motion analysis system is an ideal solution for applications, where scrutiny of basic video content is required
  • Motion analysis algorithm functions on pixel change, and incorporates object size filtering capabilities and advanced tamper-detection capabilities
  • ONVIF compliant products can exchange live video, audio, metadata, and control information
  • Offers clear images even in low light conditions by increasing the IR sensitivity
  • Built-in IR filter automatically switches from color to monochrome either by sensing the illumination level or through the alarm input
  • Default Shutter enables the camera to capture high speed moving objects when sufficient light is available, and the shutter speed returns to default value under low-light conditions to maintain sensitivity
  • Privacy Masking with 4 separate programmable privacy zones can be used to block specific parts of a scene
  • Supports password security with 3 levels, 802.1x authentication using a radius
  • SensUp Dynamic improves the sensitivity by increasing the integration time up to 10 times on the CCD
  • IP66-rated weatherproof, vandal-resistant housing ensures uninterrupted surveillance in exposed and high-risk locations

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please