Home > Shop Brands > Bosch Security >

  Bosch PB-DNR75316A 750 Series Network Video Recorder 16-Audio Channel DVD-RW 1 GB Ethernet Port
Bosch PB-DNR75316A 750 Series Network Video Recorder 16-Audio Channel DVD-RW 1 GB Ethernet Port


Our Price : $4,718.00

Product Code: PB-DNR75316A


The Bosch 700 Series Hybrid and Network Recorders offer top-of-the-line performance and adaptability. Equipped with four front-replaceable hard drives and extensive integration features, the 700 Series is ideal for medium to large-scale systems. 700 Series' superior image quality and compression gets the most out of CCTV images. Available in both IP-only and hybrid models, the 700 Series can handle even the most challenging CCTV applications without excessive demands from installers and operators.


High performance H.264:
With real-time viewing, recording, and playback in genuine 4CIF resolution, 700 Series Recorders capture all the details. More detail typically means increased bandwidth, larger storage requirements, and increased costs - but not with the 700 Series. Bosch's adanced H.264 compression technology used in the 700 Series reduces bandwidth and storage needs by up to 30% or more, compared to traditional MPEG-4 systems.

Embedded design:
The embedded design of the 700 Series Recorder offers a higher level of security against network attacks than traditional systems and has lower maintenance requirements. The security of recordings remains high while eliminating the need to install software patches and anti-virus updates. The integrated architecture, built-in installation wizards, and low-maintenance design make the 700 Series easy to set up and operate while delivering a lower total cost of ownership.

Hybrid Models:
The world of CCTV is changing - IP is replacing the analog standard in many areas. Bosch's 700 Series Recorders have the flexibility to adapt to this changing environment. The 700 Series Hybrid Recorder is the ideal choice for growing applications which use a mix of analog and IP cameras. It can record 8 or 16 analog cameras and an additional 8 or 16 IP channels, all with real-time frame rates at 4CIF resolution.

Network Models:
The 700 Series Network Recorder is the perfect match for pure IP environments. While typical IP solutions consist of many separate components - NVR Server, PC Client, external RAID storage array and software - the 700 Series Network Recorder is an all-in-one IP video management solution.



Rated Voltage and Power:
Power input:L 100 to 240 VAC; 50/60 Hz
Power consumption: Max. 2.5 to 1.0 A (250 Watt) Able to withstand power dips up to 100 MS, assuring continuous operation

Video standard: PAL or NTSC auto-detection
Resolution: 704x576 PAL, 704x480 NTSC
Compression: H.264
Inputs: 8 or 16 composite video 0.5 to 2 Vpp, 75 ohm automatic termination
Outputs: 8 or 16 composite video 1 Vpp, 75 ohm, sync 0.3 V 10%

Inputs: 8 or 16 line in (DHR models only), mono RCA, 1 Vpp, 10 kohm
Output: 2 line out, dual mono RCA, 1 Vpp, 10 kohm
Compression: MPEG-1 layer II
Sampling rate: 48 kHz per channel

Live, playback, menus
VGA: analog RGB 1280x1024, 60/75 Hz (NTSC/PAL)
CVBS: 1 Vpp, 75 ohm, BNC Y/C

MON-B (Hybrid models only):
VGA: analog RGB 1024x768, 60/75 Hz (NTSC/PAL)
CVBS: 1 Vpp, 75 ohm, BNC Y/C

Display Modes:
Monitor A: Full, full sequence, quad, multi-screen (live and playback), event call-up (live)
Monitor B (Hybrid models only): Full, full sequence, quad, multi-screen, event callup (live)
Frame rate PAL/NTSC: 25/30 IPS per channel (real time)
Multiscreen mode 8 channels: 1, 2x2, 3x3 (showing 8 channels)
Multiscreen mode 16 Channels: 1, 2x2, 3x3, 4x4
Zoom: 1.5x, 2x, 3x, 5x

Alarm Handling:
Inputs: Screw terminal, 8 or 16 inputs, configurable NO/NC, Max. input 40 VDC
Outputs: Screw terminal 4 relay outputs, configurable NO/NC, max. rated 30 VAC, 40 VDC, 0.5 A, continuous -10 VA
Remote notification: Via Control Center software
Malfunction relay: Temperature related failures, Voltage ratings, Disk failures

1 or 2 RJ45 modular jack, 8 pins shielded: 10/100/1000 Base-T

Biphase: Screw terminal connector (5 outputs), Maximum 5 controllable cameras per Biphase output


Bandwidth control: 0.1-100 Mbps limiter
Remote users: Maximum 5 simultaneously connected Control Center users
Protocol support: TCP/IP, DHCP, DNS, and SNTP

IP cameras:
Up to 16 IP H.264 for DHR models (optional)
Up to 32 IP H.264 cameras for DNR models (optional)

Supported IP H.264 devices: Dinion, FlexiDome, AutoDome Modular, EX series IP cameras, VIP X series encoders (running firmware 3.7 or later, and AutoDome Easy IP

Internal HDD: 500 GB, 1 or 2 TB per disk, Up to 4 hard disks
Redundancy: RAID-4 (4 hard disks plus optional license required), Effective storage = Smallest disk x 3


Dimensions (W x D x H) (excluding cabling): 446 x 443 x 88 mm (17.6 x 17.4 x 3.5 inch)
Weight (incl. 4 hard disks): Approx. 11 kg / 24 lbs
Rack mount kit (included): For mounting one unit in an EIA 19" rack


Operating temperature: +5 C to +45 C (+41 F to +113 F)
Storage temperature: -25 C to +70 C (-13 F to +158 F)

Relative humidity:
Operating: <93 % non-condensing
Storage: <95 % non-condensing
  • Real-time H.264 recording and playback in genuine 4CIF resolution for up to 32 cameras simultaneously
  • Hybrid models offer up to 16 analog and 16 IP camera channels; IP-only models offer up to 32 IP camera channels
  • Fully automated assignment and management of H.264 IP cameras
  • Internal storage up to 8 TB on four front-accessible hard drives with optional on-board RAID-4 support
  • Text support for storage and retrieval of video, synchronized to external data like ATM/POS data, license plate numbers, or GPS data

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please