The Bosch VideoJet X encoders belong to a family of industrial, high-performance, single-, dual-, or quad-input CCTV video encoders. They are built into a rugged housing and constructed to withstand extreme environmental conditions. The VideoJet X encoders may be used at extreme temperatures, operating from -30 °C to +60 °C (-22 °F to +140 °F). These powerful and flexible devices represent the cutting edge of high-performance Video-over- IP for CCTV today.
VideoJet X encoders are ideal for outdoor applications such as perimeter, border, and fence control, as well as for industrial applications where they are tolerant of harsh environments. When used at remote locations you benefit from their wide 10 to 30 VDC power input range, so that they can be battery or solar powered. You also benefit from their SFP (small form-factor pluggable) slot that allows a direct connection to a fiber interface module without the need for external fiber hardware. Their industrial-grade vibration resistance makes these encoders extremely suitable for use in mobile applications such as trains, busses, or other vehicles.
VideoJet X encoders offer unparalleled recording flexibility. Stream video across the network and store it using Network Video Recorders (NVRs). Record locally on CompactFlash, an external USB hard drive, or use an optional automotivegrade internal hard drive. Network-attached RAID iSCSI storage devices can also be used. The built-in iSCSI support enables the VideoJet X encoders to act as conventional DVRs while streaming high-performance live video across the network.
The VideoJet X encoders use Dual Streaming to generate two independent IP video streams per channel if sufficient computational power is available. This allows viewing and recording at two different quality levels to save disk space and bandwidth. On alarm, they can send an e-mail with JPEG images attached.
You can record the streams independently on different media. Thus video can be recorded centrally on iSCSI drives managed by VRM Video Recording Manager and redundantly on the local media. If necessary, for example in case of a network failure VRM can fill up the gap in the central recording (ANR, Automatic Network Replenishment).
The encoders feature a highly flexible recording scheduler, providing up to ten programmable recording profiles and allowing individually assigned camera profiles. With these profiles, you can accelerate the frame rate as well as increase the resolution on alarm, saving recording space during non-alarm periods.
H.264 Baseline Profile Encoding:
Firmware 4.0 enables the Bosch VideoJet X encoders to use H.264 Baseline Profile to encode the video signal. This allows reducing the required bit rate for a given quality setting, or increasing the quality when keeping the bit rate setting.
Frame Rates and Resolution:
When one or two inputs are used, the encoders deliver MPEG-4 video over IP at a full frame rate of 25 (PAL) or 30 (NTSC) images per second with up to 4CIF resolution on every channel. If four inputs are used the maximum frame rate is 12.5/15 images per second at 4CIF resolution and no Dual Streaming is possible. Because H.264 Baseline Profile does not support field encoding, interlaced video is not possible, thus resolution is limited to a maximum of 2CIF. H.264 encoding requires the double performance in respect to MPEG-4. Frame rate values must therefore be divided by two. The maximum frame rates listed in the tables below depend on the resolution, picture content and movement, and the number of inputs used.
Designed for reliability, the VideoJet X encoders feature a wide temperature range power supply, dual-redundant Ethernet network ports, a third SFP network slot with switching capability between the network ports, dual USB ports, and fault-tolerant mass storage via iSCSI.
The VideoJet X encoders offer various security levels for accessing the network, the unit, and the data channels. As well as password protection with three levels, they support 802.1x authentication using a RADIUS server for identification. You can secure Web browser access by HTTPS using a SSL certificate that is stored in the unit. For total data protection, each communication channel-video, audio, or serial I/O-can be independently AES encrypted with 128-bit keys, once the Encryption Site License has been applied.
With built-in video content analysis, VideoJet X encoders reinforce the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. The VideoJet X comes with built-in MOTION+ video motion detection. This motion detection algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper detection capabilities. Bosch offers more advanced video content analysis (VCA) applications with its Intelligent Video Analysis (IVA). A licensable option, it bases the IVA algorithm on digital imaging technology that uses multi-level image analysis of pixel, texture, and motion (trajectory) changes.
View the VideoJet X encoder video on a PC using a Web browser, in the Bosch Video Management System, or integrate it into another video management system. By routing the IP video to a high-performance VIP XD video decoder or a VIDOS Monitor Wall, you can present the video with ultimate clarity.
Remotely upgrade the VideoJet X encoders whenever new firmware becomes available. This ensures up-to-date products, thus protecting investment with little effort.
Firmware 4.10 introduces conformance to the ONVIF (Open Network Video Interface Forum) specification guaranteeing interoperability between network video products regardless of manufacturer. ONVIF conformant devices are able to exchange live video, audio, metadata and control information and ensure that they are automatically discovered and connected to network applications such as video management systems.
Power supply: Via external unit or external battery
Input voltage: 10 to 30 VDC
Power consumption: X10: approx. 16 VA, fully equipped X20/X40: approx. 22 VA, fully equipped
-X10: 1 x input
-X20: 2 x input
-X40: 4 x input
-impedance: 75 ohm, switchable
-signal Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL
-X10: 1 x mono line in, 1 x mono line out
-X20/X40: 2 x mono line in, 1 x mono line out
-connector 2 x 3.5 mm stereo jack
-signal line in 9 kohm typical, 5.5 Vpp max
-signal line out 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm typical
Alarm: 4 x input
-connector Clamp (non-isolated closing contact)
-activation resistance: 10 ohm max
Relay: 4 x output
-signal: 30 Vpp (SELV), 2 A
COM port: Clamp, RS-232/422/485
Standards: H.264 Baseline Profile (ISO/IEC 14496-10) MPEG-4, M-JPEG, JPEG
Data rates: 9.6 kbps to 6 Mbps per channel
Resolution: Horizontal x vertical PAL/NTSC
-4CIF (MPEG-4 only) X10/X20: 704 x 576/480 (25/30 ips*) X40: 704 x 576/480 (12.5/15 ips*; all inputs used)
-2CIF 704 x 288/240 (25/30 ips*)
-2/3 D1 464 x 576/480 (25/30 ips*)
-1/2 D1 352 x 576/480 (25/30 ips*)
-CIF 352 x 288/240 (25/30 ips*)
-QCIF 176 x 144/120 (25/30 ips*)
* Depending on encoding algorithm, picture content and movement
GOP structure: I, IP
Overall IP delay: 120 ms
Frame rate: 1 to 50/60 (PAL/NTSC)
Standard: G.711; 300 Hz to 3.4 kHz
Data rate: 80 kbps at 8 kHz sampling rate
Ethernet: Dual port 10/100 Base-T, auto-sensing, half/full duplex, RJ45
SFP: 1 x 1 Gbps SFP (small form-factor pluggable) slot for optional standard SFP GBIC module
Protocols: RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP, SNTP, SNMP (V1, MIB-II), 802.1x
Encryption: TLS 1.0, SSL, AES (optional)
Software update: Flash ROM, remote programmable
Configuration: Configuration Manager or Web browser
CompactFlash: 1 x CF slot for optional standard Type I/II CompactFlash memory card
USB ports: 2 x USB 2.0 high-speed ports, 2.5 W max feed each
Dimensions (H x W x D): 61 x 160 x 178 mm (2.4 x 6.3 x 7.01 Inch)
Weight: Approx. 1.5 kg (3.3 lb) with HDD
Operating temperature: -30 °C to +60 °C (-22 °F to +140 °F) ambient temperature
Relative humidity: 0 to 95% atmospheric humidity, non-condensing
Thermal value: X10: 55 BTU/h max, fully equipped X20/X40: 75 BTU/h max, fully equipped.
- Ruggedized for extended environmental conditions
- High-quality MPEG-4 video over IP
- H.264 Baseline Profile encoding
- Units with one, two, or four video inputs
- Built-in Intelligence-at-the-Edge
- Network-attached RAID storage via iSCSI
- ONVIF conformance