Bosch PB-FPPRNAC8A RNAC 8 Amps 4 Circuits

Home > Shop Brands > Bosch Security >

Our Price : $483.00

Product Code: PB-FPPRNAC8A

Qty:

Description

Use the FPP-RNAC-8A-4C power supply to add four additional notification appliance circuits to a fire alarm control panel (when connected via the option bus), or as a NAC power supply for fire-protective signaling systems (when connected directly to the NAC output). The additional notification appliance circuits can be NFPA 72, Class B (Style Y) or Class A (Style Z).

This regulated power supply provides up to 8 A of power that is used to operate both continuous and intermittent loads. This 8 A of power can be distributed through the four output circuits and auxiliary power circuit. The FPP-RNAC-8A-4C power supply is UL Listed for use in commercial fire alarm applications.

Functions:

Compatible Control Panel Connections:

The FPP-RNAC-8A-4C power supply is compatible with any UL Listed control panel that uses reverse polarity supervised notification outputs with 12 VDC or 24 VDC regulated outputs. It is also compatible with the following Bosch Control Panels:

D7022 Two-zone Conventional FACP
D8024 and D10024A Analog FACPs
-For the D7022 conventional panel and the D8024 and D10024A analog panels, the FPP-RNAC-8A-4C connects through a NAC circuit. No option bus connection is necessary.
D7024 Four-zone Addressable FACP
DS9400i Four-zone FACP
DS9400M AddressiFire FACP
-Connect up to two FPP-RNAC-8A-4C power supplies to a D7024, DS9400i, or DS9400M Control Panel. The control panel can individually control each of the four NAC outputs for each FPP-RNAC-8A-4C power supply. Only the four NAC outputs of a single FPP-RNAC-8A-4C will be synchronized.
FPD-7024 or FPA-1000-UL FACP
-Connect up to four FPP-RNAC-8A-4C power supplies to an FPD-7024 or an FPA-1000-UL control panel. Each RNAC's four NAC outputs will be synchronized and can be individually controlled for a total of 16 synchronized circuits.

NAC Output Patterns:

The NAC circuits can be set to produce the following output patterns:

Steady
Temporal Code 3
Pulsed
California March
Wheelock Synch
Gentex Synch
System Sensor Synch

Status Displays:

There are eight local status display LEDs on the FPP-RNAC-8A-4C's printed circuit board that show the following conditions:

AC OK
System Trouble
Ground Fault
Input Active
Trouble Output 1, 2, 3, and 4

DIP Switch Settings:

If connected to the fire alarm control panel's option bus, the FPP-RNAC-8A-4C needs its own option bus address. Set this address through the DIP switches. Set the DIP switches to choose:

NAC or power supply output
NAC Input Variable option
AC Delay Time

Technical Specifications:

Environmental Considerations:

Temperature (operating): +32°F to +120°F (0°C to +49°C)

Inputs (NAC): Response Time (input to output): 10 ms maximum

Mechanical Properties:

Color: Red
Dimensions (HxWxD) without door:
-20.4 in. x 14.8 in. x 4.1 in.
-(52 cm x 38 cm x 10.4 cm)

Material:
-cold-rolled steel
-Base: 18 gauge (1.2 mm)
-Cover: 19 gauge (1.1 mm)
Outputs (auxiliary):
Current (output): 850 mA maximum
Voltage (output): 24 VDC (regulated)

Outputs (NAC):
Output per circuit: 2.5 A maximum
Output (total): 8 A (all NAC and auxiliary outputs)
Voltage (output): 24 VDC (regulated)
Voltage (standby): -24 VDC (regulated)

Outputs (trouble and ac trouble relays):
Contact Type: Form C
Rating (contact): 1.5 A at 32 VDC

Power Requirements:

Current (input): 4.5 A maximum (RMS)
Power (primary input): 120 VAC, 60 Hz or 220 VAC, 50 Hz
Voltage (battery): 24 VDC nominal