 |
 |
 |
|
The Dinion Day/Night Camera is a professional surveillance day/night camera that incorporates 10-bit digital signal processing. The camera is easy to install and ready to use, offering good quality picture performance. All Dinion cameras are delivered ready to operate. Simply attach and focus the lens, then connect power. The camera automatically detects the lens type. The Lens Wizard ensures accurate back focusing for sharp pictures at all times. The camera parameters can be individually set using the control buttons on the side of the camera and On-screen Display (OSD).
Day/Night Mode: The LTC 0465 has enhanced night or low-light viewing compared to normal color cameras. The IR filter can switch from color to monochrome automatically to improve scenes when light levels have been reduced or to make use of infrared light. An internal through-the-lens IR detector enhances the monochrome mode stability as it prevents reverting to the color mode when IR illumination is dominant.
Auto Black: The automatic black level feature enhances contrast by compensating for reduced contrast (i.e. glare, fog, mist).
Bilinx Technology:
Bilinx is a bi-directional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings, and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate set-up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.
Lens Wizard:
The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening, thus ensuring proper focus maintenance throughout the 24- hour cycle. No special tools or filters are required.
Specifications:
Electrical:
Rated Voltage: 110 - 230 VAC
Rated Frequency: 45 - 65 Hz
Power Consumption: 4 W
CCD Type: 1/3-inch interline
Active Pixels: PAL Model: 752 x 582, NTSC Model: 768 x 494
Sensitivity (3200 K, scene reflectivity 89%, F1.2):
Color:
Full video (100 IRE): 2.6 lx (0.26 fc)
Usable picture (50 IRE): 0.65 lx (0.065 fc)
Usable picture (30 IRE): 0.30 lx (0.03 fc)
Mono:
Full video (100 IRE): 1.04 lx (0.104 fc)
Usable picture (50 IRE): 0.26 lx (0.026 fc)
Usable picture (30 IRE): 0.012 lx (0.0012 fc)
Horizontal Resolution: 540 TVL
Day/Night: Color, Mono, Auto
Dynamic range: 60 db (10-bit image processing)
Signal-to-Noise Ratio: > 50 dB
BLC: On (center window weighted), Off
Gain: 20 dB max.
White Balance: ATW (2500 - 10000 K), AWB hold, Manual WB selectable
Shutter: Auto (1/60 (1/50) to 1/150000), fixed, flickerless
Auto Black: Automatic, Continuous, Off
Synchronization: Internal, Line Lock selectable
Lens Mount: CS (maximum lens protrusion 5 mm, 0.2 in), C-mount compatible with adapter ring
Lens Types:
Manual, DC iris and Video iris auto-detect with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 ± 0.5 VDC, max 50 mA continuous
Remote Control: Bilinx coaxial communication
Camera ID: 16 character editable string, position selectable
Alarm Input (TTL): +5 V nominal, +40 VDC max
Alarm Output: Bilinx or monochrome
Alarm Output Relay: Max. 30 VAC or +40 VDC, Max 0,5 A continuous, 10 VA
Video Output: 1 Vpp, 75 Ohm
Mechanical:
Dimensions: (H x W x L) 58 x 66 x122 mm (2.28 x 2.6 x 4.8 in) without lens
Weight: 450 g (0.99 lbs) without lens
Color: RAL 7035 Light Grey
Tripod Mount: Bottom (isolated) and top 1/4-inch 20 UNC
Environmental:
Operating Temperature: -20°C to +50°C (-4°F to 122°F)
Storage Temperature: -40°C to +70°C (-40°F to +158°F)
Operating Humidity: 20% to 93% RH
Storage Humidity: up to 98% RH
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1/3 inch format CCD sensor
- 540 TVL resolution
- Mechanically switching IR filter for IR sensitivity at night
- Bilinx Communication for remote set-up and control
- Auto-detection of lens type with LensWizard
|
|
|
|
|
|
|
|
|
