Home > Shop Brands > Bosch Security >

  Bosch PB-LTC062051 Dinion XF Day Night Camera 1/2 Inch High Performance 540TVL PAL
Bosch PB-LTC062051 Dinion XF Day Night Camera 1/2 Inch High Performance 540TVL PAL


Our Price : $640.00

Product Code: PB-LTC062051


The LTC 0620 High Performance 1/2-inch Digital CCD Day/ Night Camera ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome. A unique combination of 15-bit digital video processing that enhances sensitivity and XF-Dynamic which extends the dynamic range provides a sharper, more detailed image with outstanding accuracy in color reproduction. All Dinion cameras are supplied ready to operate. Simply attach and focus the lens, then connect power. No tools are required for back focus and power connection. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and On-screen Display (OSD). The camera automatically detects the lens type. The Lens Wizard ensures accurate back-focusing for perfectly sharp pictures at all times.


The highly accurate 15-bit digital signal is automatically processed to optimally capture the detail in both the high and low light areas of the scene simultaneously, maximizing the information visible in the picture.

Bilinx Technology:

Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate set-up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.

Video Motion Detection:

The built-in video motion detector allows you to select up to four fully programmable areas with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting. When motion is detected alarms may be displayed in the video signal while the output relay can be closed in addition to alarm message transmission on Bilinx.

Day/Night Mode:

The Day/Night Mode LTC 0620 provides enhanced night viewing by increasing the IR sensitivity. The IR filter can switch from color to monochrome automatically by either sensing the illumination level or via the alarm input. The filter can be switched manually via the alarm input, through the camera menu or via the Bilinx coaxial control interface. An internal through the lens IR detector enhances the monochrome mode stability, as it prevents reverting to the color mode when IR illumination is dominant.



Rated Voltage: 85 265 VAC 45 65 Hz
Power Consumption: 4 W
Imager: Interline transfer CCD 1/2-inch image format
Active Pixels: PAL Model: 752 H x 582 V, NTSC Model: 768 H x 492 V

Sensitivity (3200 k):

Sensitivity (Full video): 1.4 lux (0.14 fc)
Sensitivity 50 IRE: 0.31 lux / 0.052 lux (0.031 fc / 0.0052 fc) (Monochrome Mode)
Minimum illumination: 0.18 lux / 0.024 lux (0.018 fc / 0.0025 fc) (Monochrome Mode)
Minimum Illumination with Sens Up: 0.018 lux / 0.0024 lux (0.0018 fc / 0.00024 fc) (Monochrome Mode)
Horizontal Resolution: 540 TVL
Signal-to-Noise-Ratio: > 50 dB
Video Output: 1 Vpp, 75 ohm
Y/C Output: Y: 1 Vpp / C: 0.3 Vpp
Synchronization: Internal, Line Lock, HV-lock and Genlock (Burstlock) selectable
Shutter: Auto (1/60 (1/50) to 1/500000), fixed, flickerless, default
Sensitivity: up Off, automatic continuous up to 10x
Auto Black: On, off selectable
Range: 32x dynamic range enhancement
Noise Reduction: Auto, off selectable
Contour: Sharpness enhancement level selectable
BLC: Off, area and level selectable
Gain: Auto (maximum level selectable to 28 dB) or fixed level selectable
Lens Mount: CS (max lens protrusion 5 mm, 0.2 inch)
White Balance: ATW (2500 - 10000 K), AWB hold, manual WB selectable
VMD: 4 area, sensitivity selectable
Alarm Output: VMD or Bilinx
Alarm Input (TTL): Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay: max. 30 VAC or +40 VDC, max. 0,5 A continuous, 10 VA

External Synchronal Input: 75 ohm or high impedance selectable
Cable Compensation: Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with coaxial communication)
Camera ID: 16 character editable string, position selectable

Lens Types:

Manual, DC- and Video-iris auto-detect with override
DC-iris drive: max. 50 mA continuous
Videoiiris: 11.5 0.5 VDC, max. 50 mA continuos

Remote Control: Bilinx coaxial communication


Dimensions (H x W x L): 59 x 67 x 122 mm (2.28 x 2.6 x 4.8 inch) without lens
Weight: 450 g (0.99 lbs) without lens
Tripod Mount: Bottom (isolated) and top 1/4-inch 20 UNC
Controls: OSD with softkey operation


Operating Temperature: -20 C to +50 C(-4 F to +122 F)
Storage Temperature: -25 C to +70 C(-13 F to +158 F)
Operating Humidity: 20% to 93% RH
Storage Humidity: up to 98% RH
  • 15-bit DSP Technology
  • Superb sensitivity
  • Mechanically switching IR filter for IR sensitivity at night
  • XF-Dynamic for unsurpassed wide dynamic range
  • Bilinx Communication for remote set-up and control
  • Default Shutter eliminates motion blurring
  • Four area video motion detection
  • 540 TVL resolution

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please