Home > Shop Brands > Bosch Security >

  Bosch PB-LTC063061 Dinion 2X Day/Night Camera 1/2 Inch 540TVL NTSC
Bosch PB-LTC063061 Dinion 2X Day/Night Camera 1/2 Inch 540TVL NTSC


Our Price : $622.00

Product Code: PB-LTC063061


The LTC 0630 Dinion2X Day/Night camera is a highperformance, surveillance camera. It uses a 1/2-inch CCD sensor and incorporates advanced digital signal processing for outstanding picture performance. The advanced image processing enhances sensitivity; the improved XF-Dynamic engine extends the dynamic range. This unique combination provides a sharper, more detailed image with outstanding accuracy in color reproduction even under harsh lighting conditions. The Dinion2X camera is easy to install and ready to use, and offers the best solution for demanding scene conditions. The day/night feature ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome. All Dinion cameras are supplied ready to operate. Simply attach the lens, connect video and then power. Six distinct pre-programmed operational modes are stored in the camera. Recall the mode that suits your application for optimized performance. The camera automatically detects the lens type. The lens wizard ensures accurate back-focusing for perfectly sharp pictures at all times. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and an Onscreen Display (OSD).

Day/Night Mode:

The day/night mode provides enhanced night viewing by increasing the IR sensitivity. The IR filter can switch from color to monochrome automatically by either sensing the illumination level or via the alarm input. The filter can be switched manually via the alarm input, through the camera menu or via the Bilinx coaxial control interface. An internal through-the-lens IR detector enhances the monochrome mode stability, as it prevents reverting to the color mode when IR illumination is dominant. IR contrast is also measured and used to handle reflected IR light in outdoor scenes.

Bilinx Technology:

Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate set-up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.

Video Motion Detection:

The built-in video motion detector allows you to select a programmable area with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting. When motion is detected, alarms can be displayed in the video signal, the output relay can be closed or an alarm message can be transmitted via Bilinx.



Rated Voltage: 120 VAC 10%
Rated Frequency: 60 Hz
Power Consumption: 350 mA (12 VDC), 250 mA (24 VAC), 70 mA (120-240 VAC)
CCD Type: 1/2-inch interline
Active Pixels: PAL Model: 752 x 582, NTSC Model 768 x 494

Sensitivity (3200 K, scene reflectivity 89%, F1.2):


Full video (100 IRE): 1.40 lx (0.13 fc)
Usable picture (50 IRE): 0.31 lx (0.029 fc)
Usable picture (30 IRE): 0.0991 lx (0.0097 fc)

Color + SensUp 10x:

Full video (100 IRE): 0.14 lx (0.013 fc)
Usable picture (50 IRE): 0.031 lx (0.0029 fc)
Usable picture (30 IRE): 0.00991 lx (0.0009 fc)


Full video (100 IRE): 0.57 lx (0.053 fc)
Usable picture (50 IRE): 0.121 lx (0.0112 fc)
Usable picture (30 IRE): 0.0391 lx (0.0036 fc)

Monochrome + SensUp 10x:

Full video (100 IRE): 0.057 lx (0.0053 fc)
Usable picture (50 IRE): 0.0121 lx (0.00112 fc)
Usable picture (30 IRE): 0.00391 lx (0.00036 fc)

Horizontal Resolution: 540 TVL
Signal-to-Noise Ratio: >50 dB
Video Output: Composite video 1 Vpp, 75 ohm
Synchronization: Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
Shutter: Auto (1/50 [1/60] to 1/10000) selectable, Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
Sensitivity up: Adjustable from Off up to 10x
Day/Night: Color, Mono, Auto
Auto Black: Automatic continuous, Off
Dynamic engine: XF-Dynamic, SmartBLC
Dynamic range: 96 dB (16-bit image processing)
Dynamic Noise Reduction: Auto, On/off selectable
Sharpness: Sharpness enhancement level selectable
SmartBLC: On/Off
AGC: AGC On or Off (0 30 dB) selectable
Peak White Invert: On/Off
White Balance: ATW, ATWhold and manual (2500 to 10000K)
Alarm Output: VMD or Bilinx
Alarm Input (TTL): Profile switching, +3.3 V nominal, +40 VDC max.
Alarm Output Relay: 30 VAC or +40 VDC, Max 0.5 A continuous, 10 VA
External Synchronization Input: 75 ohm or high impedance selectable
Cable Compensation: Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
Camera ID: 17 character editable string, position selectable
Test Pattern Generator: Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane

Lens Types:

Manual, DC- and Video-Iris auto-detect with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 VDC 0.5, max. 50 mA continuous

Lens Mount: CS (max lens protrusion 5 mm, 0.2 inch), Cmount compatible with supplied adapter ring
Modes: 6 preset programmable modes
Remote Control: Bilinx coaxial bi-directional communication
Video Motion Detection: One area, fully programmable
Privacy Masking: Four independent areas, fully programmable
Controls: OSD with soft-key operation (multi-lingual)


Dimensions (H x W x L): 58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch) without lens
Weight: 450 g (0.99 lbs) without lens
Color: RAL 9007 Metallic Titanium
Tripod Mount: Bottom (isolated) and top 1/4-inch 20 UNC


Operating Temperature: -20C to +55C (-4F to 131F)
Storage Temperature: -40C to +70C (-40F to +158F)
Operating Humidity: 20% to 93% RH
Storage Humidity: up to 98% RH
  • Advanced Image Processing Technology
  • Improved XF-Dynamic engine with SmartBLC
  • Detail enhancement
  • True Day/Night performance with switchable filter
  • 1/2-inch CCD sensor

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please