Home > Shop Brands > Bosch Security >

  Bosch PB-LTC862100 Camera Input Module for LTC 8601
Bosch PB-LTC862100 Camera Input Module for LTC 8601


 

Our Price : $700.39


Product Code: PB-LTC862100

Qty:

Description
 
The LTC 8600 Series Allegiant video switcher/control systems combine both switching and computer technology to provide powerful performance and unique system features for the security user. Offering full matrix switching capability, these systems can be programmed to display the video from any camera on any monitor, either manually or via independent automatic switching sequences.

Camera Control:

On-site receiver/drivers permit operator control of pan, tilt, zoom, multiple pre-positions, four auxiliaries, auto-pan, and random scan. An integral local test function is also a standard feature. The LTC 8600 Series also supports variable speed operation and full programming functions of AutoDome Series dome cameras.

Bilinx Capability:

When combined with an LTC 8016 Allegiant Bilinx Data Interface unit, these switcher/controllers support operations using Bilinx communication. With Bilinx, PTZ control is accomplished using a bidirectional communication protocol embedded in the video signal of Bosch Dinion and AutoDome CCTV cameras. In addition, Bilinx uses the standard video cable to transmit alarm and status messages from the cameras, providing superior performance without the need for separate data transmission cables.

Programming/Software Capabilities:Model: LTC 8621/00
Video Inputs: Standard:128 Satellite configuration:1024
Video Outputs: 16
Keyboards: 16
Alarm Inputs: 512
Receiver/Drivers: Standard:128 Satellite configuration:1024
Video Bandwidth(-3 dB): 12 MHz typical
Differential Gain: 1% maximum
Differential Phase: 2 maximum
K Factor: 0.5%
Signal-to-Noise Ratio: 70 dB minimum
Crosstalk(Input to Input Isolation): -50 dB typical
Feedthrough(Input to Output Isolation): 45 dB typical
Gain: Unity 2% (into 75 Ohm termination)
Tilt: 1% typical
Operating Temperature: 4C to 50C (40F to 122F)
Storage Temperature: -40C to 60C (-40F to 140F)
Altitude: 4500 m (15,000 ft)
Humidity: 0% to 95% relative, non-condensing
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 ms, 1/2 sine wave
Camera Inputs: 16
Size (D x H): 300 x 250 mm (11.8 x 9.8 in.)
Weight: 0.41 kg (0.9 lb)
The LTC 8600 Series includes a black outlined 48-character on-screen display for time-date, camera number, camera ID (16-characters), an icon to identify controllable cameras, and monitor (12-characters) or status information. Over 1000 characters are available when programming camera ID and monitor titles. Utilizing a standard Windows -based PC and the optional LTC 8059/00 Master Control Software package or LTC 8850/00 Graphical User Interface (GUI) software, enhanced programming and switching features can be obtained. A user-friendly spreadsheet format provides the ability to enter camera titles, operator names, 64 timed events, change system parameters, program camera sequences, install lockouts, and access the advanced alarm handling screens with speed and efficiency. The programmed information may then be transferred into the Allegiant system, stored on disk, or printed out directly from a printer connected to the PC. The LTC 8850/00 GUI software is designed around an intuitive graphic-based interface, the GUI provides high performance programming, control and monitoring of all system functions by using on-screen icons to reflect real time status of the devices controlled by the system. The LTC 8850/00 GUI software also provides the ability to monitor system status events. System alarms, switching functions, sequence events, keyboard actions, and video loss information can be viewed in real time on the PC screen and, if desired, logged to the PC hard drive. The LTC 8600 Series contain a logging printer output port which accepts a standard RS-232 serial printer. This provides a permanent record of system status showing time and date of changes such as: incoming alarms, acknowledgment of alarms, loading of sequences, user logon to keyboard, transfer of system tables and sequences, video loss messages, and a power up reset message. In addition, the printer can be used to obtain a hard copy of the system's configuration tables and sequences. The LTC 8600 system provides powerful macro capabilities. The macros can be activated using Allegiant Series system keyboards, system time event functions, alarm activations, and via special function icons in the LTC 8850/00 GUI software.

Expansion Capabilities: The LTC 8600 Series can serve as the Master Switcher in a SatelliteSwitch configuration. This innovative SatelliteSwitch feature enables a single LTC 8600 Series system to communicate with remotely located "Satellite" systems. Any Allegiant system model can serve as a master or remote Satellite switcher. This powerful feature permits the design of a distributed matrix video switching system with control at one central location and individual control at the local sites. The main control site can view/control local cameras plus cameras located at any of the remotely distributed Satellite sites. The Satellite sites can view/ control only cameras associated with their own site. When used in this type of configuration, the main LTC 8600 Series system can access up to 1024 cameras located anywhere in the system. By combining multiple Satellite systems of this type, matrix sizes of 1024 cameras by 16 monitors can be designed in an extremely reliable, "Distributed Processing" configuration.

Specifications:

Features
  • 128 Camera by 16 monitor switching
  • Modular construction
  • Powerful alarm handling capabilities
  • SalvoSwitching and SatelliteSwitch capability
  • PC-based software package available
  • Economical single-bay design

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please