Home > Shop Brands > Bosch Security >

  Bosch PB-LTC890260 Allegiant Monitor Bay
Bosch PB-LTC890260 Allegiant Monitor Bay


Our Price : $3,948.91

Product Code: PB-LTC890260


The LTC 8900 Series Allegiant Video Switcher/Control Systems are powerful full matrix switchers, capable of displaying video from any camera on any monitor, either manually or via independent automatic switching sequences. By using the LTC 8901 series CPU and the LTC 8943 series PC, the standard system can be enhanced to include dual/redundant CPU/Power supply with automatic hot-switchover capabilities.

Dual/Redundant System:

For situations where complete system failure cannot be tolerated, we offer the dual redundant LTC 8901 CPU. This CPU unit incorporates a secondary CPU/power supply. In the event of a primary CPU or power supply failure, the system switches over automatically to the backup CPU or power supply. The system uses an independent PC that continuously monitors the CPUs for failure and performs a hot-switchover if needed. You can also manually change CPUs using the preloaded software or via a front panel slide switch.

Bilinx Capability:

When combined with an LTC 8016 Allegiant Bilinx Data Interface unit, these switcher/controllers support operations using Bilinx communication. With Bilinx, PTZ control is accomplished using a bidirectional communication protocol embedded in the video signal of Bosch Dinion and AutoDome CCTV cameras. In addition, Bilinx uses the standard video cable to transmit alarm and status messages from the cameras, providing superior performance without the need for separate data transmission cables.

Programming/Software Capabilities:

The LTC 8900 Series includes a black outlined 48- character on-screen display for time/date, camera number, camera ID (16 characters), and monitor (12 characters) or status information. Over 1,000 characters covering a multitude of languages, (including several hundred Chinese symbols) are available to help program camera ID and monitor titles. Using the supplied PC software, enhanced programming and switching features can be obtained. A user friendly spreadsheet format allows one to easily enter/change camera titles, operator names, timed events (128), system parameters, camera sequences, lockouts, and advanced alarm response programming. The software also provides the ability to enable an on-screen indicator for easy identification of controllable cameras. Another useful feature of the software is its ability to store or print (in real-time) programming information, system events, alarms, switching functions, sequence events, keyboard actions, and video loss information.

Expansion Capabilities:

The LTC 8900 Series can serve as the Master or Slave Switcher in a SatelliteSwitch configuration. This innovative SatelliteSwitch feature enables a single LTC 8900 system to communicate with remotely located Satellite systems. Any Allegiant system can serve as a remote Satellite Switcher. This powerful feature permits the design of large distributed type systems. The main control site can view and control local cameras as well as cameras located at any of the remotely distributed Satellite sites. The Satellite sites can view and control only cameras associated with their local site. When used in this type of configuration, the main LTC 8900 system can access up to 256 Satellite sites.



Rated Voltage: 120 VAC, 50/60 Hz
Voltage Range: 100 to 140
Nominal Power: 160 W


Video Outputs: Four (4), 34-pin ribbon connectors used in conjunction with the LTC 8808/00 video interconnect panel
Video Bus Connections: Sixteen (16), 34-pin ribbon connectors interconnect with LTC 8903 Series Camera Input bays using LTC 8809/00 ribbon cables
Console: Port reserved for future use
COM 1: Port reserved for future use
COM 2: Port reserved for future use
EXT Sync: BNC input used to synchronize the unit to an external sync signal. Accepts composite video, composite sync, or the V Sync output provided from another LTC 8900 Series matrix bay
V Sync: BNC connector provides an output signal to synchronize an additional LTC 8900 Series matrix bay via its EXT Sync input
External Data Interface: Two (2), RJ-45 high-speed LAN ports for interface to the LTC 8901 Main CPU bay via system LAN Switches. (Connected in parallel; one is used, one is reserved for future use)


Equipment Rack:

Dimensions (W x D x H): EIA 48 cm (19 in.) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 inch)
Weight: 11.1 kg (24.5 lb)
Construction: Metal cabinet
Finish: Charcoal

Data Receiver Module (LTC 8916/00):

Dimensions (W x D x H): EIA 48 cm (19 inch) rack, 483 x 420 x 267 mm (19 x 16.5 x 10.5 inch)
Weight: 0.5 kg (1.1 lb)

Power Supply (LTC 8906/60 or LTC 8906/50):

Dimensions (W x D x H): 67 x 360 x 247 mm (2.63 x 14.2 x 9.7 inch)
Weight: 5.2 kg (11.5 lb)
Indicators: Power On/Off and fuse alert LEDs
  • 4096 Camera by 512 monitor switching
  • Modular construction
  • Powerful alarm handling capabilities
  • SalvoSwitching and SatelliteSwitch capability
  • Includes Windows-based configuration software

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please