Home > Shop Brands > Bosch Security >

  Bosch PB-LTC893400 Video Output Module
Bosch PB-LTC893400 Video Output Module


 

Our Price : $1,952.25


Product Code: PB-LTC893400

Qty:

Description
 
The LTC 8934/00 Video Output modules are installed into LTC 8902 Series Output Bays to provide video output to monitors and DVR/VCRs. Each output module handles 8 outputs. Up to 8 modules can be installed in each LTC 8902 Series Output Bay.

The appropriate number of LTC 8934/00 Video Output Modules should be installed in the LTC 8902 Series main bay starting with the left most slot. Each output module handles 8 outputs. If fewer than the maximum number of Video Output Modules are installed, they should be installed from left to right, with empty spaces on the right. In some system configurations, 8 or less LTC 8934/00 modules may be distributed between two (2) LTC 8902 Series Video Output bays. This configuration assures partial system operation in the unlikely event of an LTC 8902 Series failure. Since this creates a gap in the monitor number order, the optional Allegiant PC-based system software allows renumbering of the logical monitor numbers. For example, if the system was designed for 64 monitor outputs, four LTC 8934/00 modules (handling monitors 1 to 32) would be installed in the first LTC 8902 Series bay. Another four LTC 8934/00 modules would be installed in a second LTC 8902 Series bay. The default monitor number range for this second module would be 65 to 96. Since this would be inconvenient to operators of the system, the logical numbers of the monitor numbers in the second bay can be renumbered to range from 33 to 64 using the optional Allegiant PC-based system software. It is also possible to number the monitors so that one bay contains the odd numbered monitors and the other bay contains even numbered monitors. This way, a viewing location containing an even mix of monitors from each bay would lose every other one in the unlikely event of a LTC 8902 Series bay failure.

The LTC 8934/00 Video Output Modules contain five (5) 8-position dip switches. DIP switch S1001 is reserved and all switches should be left in the ON position. Dip switches S1002, S1003, S1004, and S1005 are video termination switches for each of the video bus inputs. All of these switches should be set to ON (terminated). This is the factory default. All LTC 8934/00 Video Output Modules are identical and can be swapped anywhere within the bay without changing the module.
Features
  • Video Output Module
  • Use up to: Eight per LTC 8902 Series monitor output bays.
  • Monitor Outputs: 8
  • Dimensions (D x H): 300 x 250 mm (11.8 x 9.8 inch)
  • Weight: 0.41 kg (0.9 lb)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please