 |
 |
 |
|
The LTC 9418/20 is a high quality pan/tilt unit from Bosch that is capable of providing outdoor pan/tilt operation with its waterproof properties. The LTC 9418/20 pan/tilt unit is compatible with CCD sensor cameras, housings and lenses, and is made of corrosion resistant properties that offer use in long term operation. The LTC 9418/20 pan/tilt unit also comes with a max load capacity of 10kgs, a 100% duty cycle motor, an upright/inverted operation, as well as a 7°/seconds pan speed, and a 0° to 345° maximum pan range. This high quality pan/tilt unit is capable of providing high operation, and comes complete with a 3.5°/s seconds tilt speed, and a light gray finish.
Specifications:
Electromagnetic compatibility (EMC): Complies with FCC Part 15, ICES-003, and CE regulations
Product Safety: Complies with CE regulations, UL, CSA, EN, and IEC Standards
Rated Motor Voltage: 24 VAC, 60 Hz
Operational Voltage Range: 21.6 to 26.4 VAC
Power Connectors: Via 24-pin connector on base
Ground Connectors: Screw connection for grounding on base
Temperature: Operating: -30°C to +60°C (-22°F to +140°F), Storage: -40° to +60°C (-40°F to +140°F)
Vibration: 3g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 ms, 1/2 sine
Enclosure: Tested to IP54 requirements (upright mount- ing). UL 50 Type 3/NEMA-3 design.
Pan Range (Movement in horizontal plane): 0° to 345° maximum
Pan Speed: 7°/seconds
Tilt (Movement in vertical plane): +30° to -90° from horizontal
Tilt Speed: 3.5°/s seconds
Maximum Load: 149 kg-cm (129 lb-in.) torque or 10 kg (22 lb) at a distance of 63.5 mm (2.5 in.) from the center of mass of the camera/lens/housing assembly to the center of the tilt table
Construction: Cast aluminum base and yoke, corrosion resistant plastic cover
Finish: Light gray
Weight: 6.21 kg (13.7 lb)
Recommended Maximum Cable Lengths:
Wire Size( in mm2)): 0.5/1/1.5/2.5/4
Wire Size ( in AWG): 20/18/16/14/12
Distance( in Meters): 43 / 70 / 110 /180/287
Distance ( in Feet): 140/ 230/ 360/ 590/ 940
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Maximum Load: 10 kg (22 lb)
- Low Profile, Compact Size
- Corrosion Resistant Hardware
- 100% Duty Cycle Motors
- Upright or Inverted Operation
|
|
|
|
|
|
|
|
|
