 |
 |
 |
|
The LTC 9420/20 is a high quality pan/tilt unit from Bosch that offers high quality operation when used within a surveillance and security application. The LTC 9420/20 pan/tilt unit comes with a weatherproof exterior, corrosion resistant properties, a 22lbs max load capacity, feed-through wiring, as well as high compatibility for CCD cameras, housings and lenses. The LTC 9420/20 pan/tilt unit also features a 100% duty cycle motor, long life limit switches, upright/inverted operation, as well as a maximum load capacity of 10kg, a 0° to 345° maximum pan range, and a 7°/seconds pan speed. This high quality pan/tilt unit is capable of being used within many outdoor locations, and comes easy to setup for fast and efficient operation.
Specifications:
Electromagnetic Compatibility (EMC): Complies with FCC Part 15, ICES-003, and CE regulations
Product Safety: Complies with CE regulations, UL, CSA, EN, and IEC Standards
Rated Motor Voltage: 24 VAC, 60 Hz
Operational Voltage Range: 21.6 to 26.4 VAC
Power Connectors: Via 24-pin connector on base through to 3-conductor cable on pan head
Ground Connectors: Screw connection for grounding on base
Temperature: Operating: -30°C to +60°C (-22°F to +140°F), Storage: -40°C to +60°C (-40°F to +140°F)
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 ms, 1/2 sine
Enclosure: Tested to IP54 requirements. UL 50 Type 3/NEMA-3 design (upright mounting)
Pan Range (Movement in horizontal plane): 0° to 345° maximum
Pan Speed: 7°/seconds
Tilt (Movement in vertical plane): +30° to -90° from horizontal
Tilt Speed: 3.5°/s seconds
Maximum Load: 149 kg-cm (129 lb-in.) torque or 10 kg (22 lb) at a distance of 63.5 mm (2.5 in.) from the center of mass of the camera/lens/housing assembly to the center of the tilt table
Construction: Cast aluminum base and yoke, corrosion resistant plastic cover
Finish: Light gray
Weight: 6.67 kg (14.7 lb)
Lens and Accessories: Via 24-pin connector on base through to 10-conductor cable on pan head
Video: Via BNC connector on base through to Flying Lead coax on pan head
Recommended Maximum Cable Lengths :
Wire Size( in mm2)): 0.5/1/1.5/2.5/4
Wire Size ( in AWG): 20/18/16/14/12
Distance( in Meters): 43/ 70 / 110 / 180 / 287
Distance ( in Feet): 140/ 230/ 360/ 590 / 940
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Maximum Load: 10 kg (22 lb)
- Low Profile, Compact Size
- Feed-through Wiring
- 100% Duty Cycle Motors
- Upright or Inverted Operation
- Pre-position and 345° Models Available
|
|
|
|
|
|
|
|
|
