 |
 |
 |
|
The LTC 9420/60 is a pan/tilt unit from Bosch that is able to provide and deliver enhanced operation within many surveillance applications. The LTC 9420/60 pan/tilt unit comes with a 22lb max load capacity, feed through wiring, a fully compatible system with CCD cameras, housings and lenses, as well as a 100% duty cycle motor, and long life limit switches. The LTC 9420/60 pan/tilt unit also features overload protection, upright/inverted operation, a 0° to 345° maximum pan range, a 7°/seconds pan speed, a 3.5°/s seconds tilt speed, as well as a +30° to -90° from horizontal tilt movement, and a light gray colored finish. This high performance and reliable pan/tilt unit is able to offer increased operation, and provides a strong construction that can last within many surveillance applications.
Specifications:
Electromagnetic Compatibility (EMC): Complies with FCC Part 15, ICES-003, and CE regulations
Product Safety: Complies with CE regulations, UL, CSA, EN, and IEC Standards
Rated Motor Voltage: 120 VAC, 60 Hz
Operational Voltage Range: 108 to 132 VAC
Power Connectors: Via 24-pin connector on base through to 3-conductor cable on pan head
Ground Connectors: Screw connection for grounding on base
Temperature: Operating: -30°C to +60°C (-22°F to +140°F), Storage: -40°C to +60°C (-40°F to +140°F)
Vibration: 3 g swept sine wave, 15 Hz to 2000 Hz
Shock: 50 g, 11 ms, 1/2 sine
Enclosure: Tested to IP54 requirements. UL 50 Type 3/NEMA-3 design (upright mounting)
Pan Range (Movement in horizontal plane): 0° to 345° maximum
Pan Speed: 7°/seconds
Tilt (Movement in vertical plane): +30° to -90° from horizontal
Tilt Speed: 3.5°/s seconds
Maximum Load: 149 kg-cm (129 lb-in.) torque or 10 kg (22 lb) at a distance of 63.5 mm (2.5 in.) from the center of mass of the camera/lens/housing assembly to the center of the tilt table
Construction: Cast aluminum base and yoke, corrosion resistant plastic cover
Finish: Light gray
Weight: 6.67 kg (14.7 lb)
Lens and Accessories: Via 24-pin connector on base through to 10-conductor cable on pan head
Video: Via BNC connector on base through to Flying Lead coax on pan head
Recommended Maximum Cable Lengths:
Wire Size( in mm2)): 0.5/1/1.5/2.5
Wire Size ( in AWG): 20/18/16/14
Distance( in Meters): 671/ 1067 / 1677 / 2744
Distance ( in Feet): 2200/ 3500/ 5500/ 9000
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Maximum Load: 10 kg (22 lb)
- Low Profile, Compact Size
- Feed-through Wiring
- 100% Duty Cycle Motors
- Upright or Inverted Operation
- Pre-position and 345° Models Available
|
|
|
|
|
|
|
|
|
