Home > Shop Brands > Bosch Security >

  Bosch PB-LTC948821 Outdoor Housing for Camera/Lens to 13 Inch 24VAC 50/60 Hz
Bosch PB-LTC948821 Outdoor Housing for Camera/Lens to 13 Inch 24VAC 50/60 Hz


 

Our Price : $228.85


Product Code: PB-LTC948821

Qty:

Description
 
The LTC 948x Series Housings are smartly styled housings for indoor and outdoor use. These housings meet customers demands for attractive housings that are both cost competitive and easy to install. They are available in multiple sizes to fit a wide range of cameras and lenses. The design of these housings is unique. Removal of two captive screws is all that is necessary to slide off the cover and totally expose the camera and lens. This allows access to all camera and lens controls when the camera is in its mounted position. Power, video, and lens control cabling can be routed through liquid-tight fittings in the bottom rear of the housing, or can be routed through the mounting base. Feed-through mounts and J-mounts are available for these housings, to completely hide the cabling. The base of the housings permits mounting to pan/tilts, adjustable heads, and various wall-mounts.

These sturdily constructed housings are available with a preinstalled heater or a preinstalled heater and blower. The heater maintains the internal temperature of the housing in cold temperature conditions, and the heater/blower combination minimizes fogging in high humidity locations and extends the temperature limits.

Specifications:

Electrical:

Preinstalled: Heater/Blower
Voltage/Power: 24V / 42W
Use with Camera Models with These Voltage Ratings: 24 VAC

Mechanical:

Maximum Camera and Lens: 71 x 71 x 318 mm (2.8 x 2.8 x 12.5 inch)

Cable Entry:

Three (3) liquid-tight rear fittings, two (2) of which accept cable diameters from 4.3mm to 11.9mm (0.17inch to 0.47inch) and one (1) that accepts cable diameters from 4.6mm to 7.9mm (0.18inch to 0.31inch)

Two (2) bottom feed-through liquid-tight fittings accept cable diameters from 4.6mm to 7.9mm (0.18inch to 0.31inch)

Window: 3mm (0.12inch) thick UV-stabilized polycarbonate
Housing Mounting: Four (4) available 1/4-20 tapped holes. Only one set of two is required for mounting
Camera Mounting: Removable camera bracket. Mounted with two screws

Construction: Aluminum cover, aluminum base, aluminum mounting foot, polycarbonate faceplate, glass reinforced polycarbonate end caps, neoprene gasket, ethylene propylene seal, and all stainless steel hardware

Finish: Dark mushroom
Weight (approx.): 3.2kg (7lb)

Environmental:

Temperature: At external temperature of -40 C to 50 C (-40 F to 122 F), maintains internal temperatures between -20 C and 55 C (-4 F to 131F) with heater/blower
Salt Atmosphere: MIL-STD-810E, Method 509, Procedure 1
Enclosure Protection: IP65, Designed to meet NEMA 4

Electromagnetic Compatibility: Safety: UL, cUL, CE
Features
  • For 1/4inch, 1/3inch & 1/2inch CCD Cameras
  • Feed-through Wiring Option
  • Aluminum and Advanced Polymer Construction
  • Easy Installation
  • Full Camera Accessibility
  • Available in Multiple Sizes
  • Multiple Accessories Available

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Bosch Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please