Dinion2X Day/Night IP cameras are progressive scan CCD cameras. They can tri-stream video simultaneously - on two H.264 streams and one M-JPEG stream. Equipped= with 20-bit DSP with 2X-dynamic, they have a wide dynamic range for a sharper, more detailed image with outstanding color reproduction.
Features such as multicasting, internet streaming and iSCSI recording are fully supported. Dinion2X Day/Night IP cameras have built-in video motion detection and additional processing power for video content analysissystems.
Supporting the award-winning Dinion2X digital imaging technology, they provide proven, dependable service for the most demanding security and surveillance requirements, day or night.
To capture sharp images, even in busy scenes with high motion content, the Dinion camera uses progressive scan technology.
Superior image quality:
With a 1/3-inch CCD and Bosch's advanced digital signal processing, the Dinion2X Day/Night IP camera provides outstanding image quality in virtually all situations. The highly accurate 20-bit digital signal is automatically processed to reveal every detail of the image in both the high and low-light areas of the scene simultaneously.
20-bit Image Processing:
The highly accurate digital signal processing optimally captures the detail in both bright highlights and deep shadows simultaneously. By combining 20-bit image processing and wide dynamic range, the Dinion2X maximizes the information visible in the picture even with strong backlight.
Wide Dynamic Range:
The superior wide dynamic range performance for all lighting conditions reveals details previously unseen.
2X-Dynamic and SmartBLC:
Using 2X-Dynamic technology, pixel-by-pixel analysis provides the user with the most detailed information. Turn on SmartBLC to automatically compensate the image without the need for complicated set-up or without compromising dynamic range. Features such as Autoblack and Sharpness further improve the details in a scene, pixel by pixel.
Efficient bandwidth and storage management:
The cameras use H.264 compression, bandwidth throttling, and multicasting capabilities to manage bandwidth and storage requirements efficiently, while delivering high image quality and resolution. The bandwidth of an H.264 stream using Main profile at 4CIF resolution is about the same as one MPEG-4 stream at 2CIF resolution. Bosch's innovative tri-streaming feature enables Dinion IP cameras to generate two independent H.264 streams and one M-JPEG stream simultaneously. This allows streaming of high-quality H.264 images for live viewing and recording while streaming M-JPEG images to another device at the same time. The M-JPEG video stream also provides easy integration with third-party JPEG or M-JPEG-compatible video management systems. Dinion IP cameras offer unparalleled recording options. Attached to the network, they can use iSCSI targets directly, as well as Network Video Recorders (NVRs). The iSCSI storage target support enables the cameras to function as a conventional DVR, while streaming highperformance live video across the network.
With built-in video content analysis, the camera reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. The MOTION+ video motion analysis system, that is built into all camera versions, is the perfect solution for applications where basic video content analysis features are required. This motion analysis algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper-detection capabilities.
The hardware-enhanced version of the camera gives you the opportunity to upgrade the video content analysis features of the camera with the more advanced Intelligent Video Analysis (IVA) option. This option bases the IVA algorithm on digital imaging technology that uses multilevel image analysis of pixels, texture, and object direction, and is activated by installing a license.
The camera conforms to the ONVIF (Open Network Video Interface Forum) specification which guarantees interoperability between network video products regardless of manufacturer. ONVIF conformant devices are able to exchange live video, audio, metadata and control information. They are automatically discovered and connected to network applications such as video management systems.
There are many ways to access the camera's video: on a PC using a web browser, with the Bosch Video Management System, or with VIDOS. The camera is also ideal for use with a Divar 700 Series digital video recorder. By routing a video stream to a Bosch video decoder, you can also present the video with ultimate clarity on an analog monitor.
Cost effective, simple installation:
Three power options, PoE (Power-over-Ethernet), 24 VAC and 12 VDC are available. Using PoE makes installation easier and more cost-effective, as cameras do not require a local power source. To increase system reliability, the camera can be simultaneously connected to both PoE and 12 VDC/24 VAC supplies. Additionally, uninterruptible power supplies (UPS) can be used, which will allow continuous operation, even during a power failure. For trouble free network cabling, the cameras support Auto-MDIX.
Dinion IP cameras can be configured using the control buttons on the camera as an alternative to configuration over IP. The On-Screen Display (OSD) simplifies back focus adjustment and network configuration, minimizing installation and support costs. The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to maintain proper focus.
Remotely upgrade the camera whenever new firmware becomes available. This ensures up-to-date products, thus protecting investment with little effort.
Various security levels are available for accessing the network, the camera, and the data channels. As well as password protection with three levels, 802.1x authentication using a RADIUS is supported. To secure Web browser access use HTTPS with a SSL certificate stored in the camera. For total data protection, the video and audio communication channels can be independently AES encrypted with 128-bit keys by installing the optional Encryption Site License.
Six independent, pre-programmed operating modes support typical applications, but are fully programmable for individual situations.
In night mode, the camera enhances low light viewing by switching the IR (infrared) filter out of the optical path and providing a monochrome image. The camera can switch from color to monochrome mode automatically by sensing the illumination level, manually via the alarm input, or remotely via a web browser. An internal, through-the-lens IR detector enhances monochrome mode stability by preventing the camera from returning to color mode when IR-illumination is dominant.
Four different privacy zones allow specific parts of a scene to be blocked. A mask for any part of the scene can be pre-programmed.
The default shutter speed captures fast moving objects when sufficient light is available. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to a standard setting to maintain sensitivity.
By increasing the integration time up to 10 times on the CCD, the effective sensitivity is dramatically enhanced. This is especially useful when relying only on moonlight for illumination.
Prisons and correctional facilities
Traffic monitoring (air, land and sea)
Hotels, bars and nightclubs
Commercial and government buildings
City surveillance and safety
Type: 1/3-inch CCD, WDR, dual shutter
Active Pixels (PAL): 752 x 582
Active Pixels (NTSC): 768 x 494
Video compression: H.264 (ISO/IEC 14496-10); M-JPEG,JPEG
Data rate: 9.6 Kbps to 6 Mbps
Resolution: Horizontal x vertical (PAL/NTSC ips)
4CIF: 704 x 576/480 (25/30 ips)
CIF: 352 x 288/240 (25/30 ips)
Overall IP Delay: Min. 120 ms, Max. 240 ms
GOP structure: I, IP
Frame rate: 1 to 50/60 (PAL/NTSC) H.264 1 to 25/30 (PAL/NTSC) M-JPEG
Signal: Analog composite (NTSC or PAL), service
Connector: BNC, 75 Ohm
Horizontal: resolution 540 TVL
Video: S/N 50 dB
Signal Analog composite: (NTSC or PAL), service
Connector BNC:, 75 Ohm
Horizontal resolution: 540 TVL
Video: S/N 50 dB
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Day/Night: Color, Mono, Auto
Modes: 6 preset programmable modes
Dynamic range: 120 dB (20-bit image processing)
Signal-to-Noise Ratio: > 50 dB
Dynamic engine: 2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dynamic
SmartBLC: On (includes 2X-Dynamic ) / Off AGC AGC On or Off (0 - 30 dB) selectable
White Balance: ATW (2500 to 10000K), ATWhold and manual
Shutter: Auto (1/50 [1/60] to 1/10000) selectableAuto (1/50 [1/60] to 1/50000) automaticflickerless, fixed selectable
Sensitivity up: Adjustable from Off up to 10x
Auto Black: Automatic continuous, Off
Dynamic Noise Reduction: Auto, On/off selectable
Sharpness: Sharpness enhancement level selectable
Peak White Invert: On/Off
- 1/3-inch Day/Night CCD with progressive scan20-bit image processing technology
- Wide Dynamic Range, 2X-dynamic engine and SmartBLC
- Tri-streaming: Dual H.264 and M-JPEG simultaneously
- Intelligence at the edge
- ONVIF conformant
- Manages RAID storage in the Bosch Direct-to-iSCSI CCTV system
- Distributed storage and configurable load balancing
- iSCSI disk array failover for extra reliability
- Used with all Bosch Video-over-IP cameras and encoders Configuration support for all Bosch disk arrays (DVA and DSA series)