Dinion2X Day/Night IP cameras are progressive scan CCD
cameras. They can tri-stream video simultaneously — on
two H.264 streams and one M-JPEG stream. Equipped
with 20-bit DSP with 2X‑dynamic, they have a wide
dynamic range for a sharper, more detailed image with
outstanding color reproduction.
Features such as multicasting, internet streaming and
iSCSI recording are fully supported. Dinion2X Day/Night
IP cameras have built-in video motion detection and
additional processing power for video content analysis
systems.
Supporting the award-winning Dinion2X digital imaging
technology, they provide proven, dependable service for
the most demanding security and surveillance
requirements, day or night.

• Parts Included
• Quantity Components
• 1 NBN-498 Series Dinion2x Day/Night IP Camera
• 1 Spare lens connector
• 1 Safety Instructions
• 1 Quick Install Guide
• 1 Mini DVD-ROM with manuals, software and tools
• 1 Power connector
• 1 Alarm I/O connector
• 1 Data connector
• 1 C/CS mount adapter
• Electrical
• Model No. Rated Voltage Rated Frequency
• NBN-498-1xP 24 VAC ±10% 50 Hz
• 12 VDC ±10%
• Power-over-Ethernet
• NBN-498-2xP 24 VAC ±10% 60 Hz
• 12 VDC ±10%
• Power-over-Ethernet
• Current Consumption 550 mA | 650 mA IVA (12 VDC)
• 550 mA | 650 mA IVA (24 VAC)
• 200 mA | 250 mA IVA (PoE 48 VDC)
• Power Consumption 6.6 W | 7.8 W IVA (12 VDC)
• 8.2 W | 9.7 W IVA (24 VAC)
• 9.6 W (PoE 48 VDC)
• Sensor
• Type 1/3-inch CCD, WDR, dual shutter
• Active Pixels (PAL) 752 x 582
• Active Pixels (NTSC) 768 x 494
• Video
• Video compression H.264 (ISO/IEC 14496-10); M-JPEG,
• JPEG
• Data rate 9.6 Kbps to 6 Mbps
• Resolution Horizontal x vertical (PAL/NTSC ips)
• 4CIF 704 x 576/480 (25/30 ips)
• CIF 352 x 288/240 (25/30 ips)
• Overall IP Delay Min. 120 ms, Max. 240 ms
• GOP structure I, IP
• Frame rate 1 to 50/60 (PAL/NTSC) H.264
• 1 to 25/30 (PAL/NTSC) M-JPEG
• Video Out (service mode only)
• Signal Analog composite (NTSC or PAL), service
• only
• Connector BNC, 75 Ohm
• Horizontal resolution 540 TVL
• Video S/N 50 dB
• Sensitivity (3200 K, scene reflectivity 89%, F1.2)
• Full video
• (100 IRE)
• Usable picture
• (50 IRE)
• Minimum Illumination
• (30 IRE)
• Color 2.4 lx
• (0.223 fc)
• 0.47 lx
• (0.044 fc)
• 0.15 lx
• (0.0139 fc)
• Color
• + SensUp 10x
• 0.24 lx
• (0.0223 fc)
• 0.047 lx
• (0.00437 fc)
• 0.015 lx
• (0.00139 fc)
• Monochrome 0.98 lx
• (0.091 fc)
• 0.188 lx
• (0.0174 fc)
• 0.060 lx
• (0.0056 fc)
• Monochrome
• + SensUp 10x
• 0.098 lx
• (0.0091 fc)
• 0.019 lx
• (0.00176 fc)
• 0.0060 lx
• (0.000557 fc)
• Day/Night Color, Mono, Auto
• Modes 6 preset programmable modes
• Dynamic range 120 dB (20-bit image processing)
• Signal-to-Noise Ratio > 50 dB
• Dynamic engine 2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dynamic
• SmartBLC On (includes 2X-Dynamic ) / Off
• AGC AGC On or Off (0 - 30 dB) selectable
• White Balance ATW (2500 to 10000K), ATWhold and manual
• Shutter Auto (1/50 [1/60] to 1/10000) selectable
• Auto (1/50 [1/60] to 1/50000) automatic
• flickerless, fixed selectable
• Sensitivity up Adjustable from Off up to 10x
• Auto Black Automatic continuous, Off
• Dynamic Noise Reduction Auto, On/off selectable
• Sharpness Sharpness enhancement level selectable
• Peak White Invert On/Off
• Privacy Masking Four independent areas, fully programmable
• Video Motion Analysis Motion+ or IVA
• Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth
• 2H, Checker board, Cross hatch, UV
• plane
• Synchronization Internal, Line Lock selectable
• Lens Mount CS (max lens protrusion 5 mm, 0.2 inch), Cmount
• compatible with supplied adapter ring
• Lens Types Manual, DC- and Video-Iris auto-detect with
• override
• DC-iris drive: max. 50 mA continuous
• Video-iris: 11.5 VDC ±0.5, max. 50 mA continuous
• Controls OSD with soft-key operation (multi-lingual)
• Audio
• Standard G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate
• Signal-to-noise ratio > 50 dB
• Input/output
• Audio 1 x mono line in, 1 x mono line out
• • connector 3.5 mm stereo jack
• • signal line in 9 kohm typical, 5.5 Vpp max
• • signal line out 3.0 Vpp at 10 kOhm typical,
• 2.3 Vpp at 32 Ohm typical,
• 1.7 Vpp at 16 Ohm typical
• Alarm 2 inputs
• • connector Clamp (non-isolated closing contact)
• • activation voltage +5 VDC to +40 VDC
• (+3.3 VDC with DC-coupled 22 kOhm pull-up
• resistor)
• Relay 1 output
• • connector Clamp
• • voltage 30 VAC or +40 VDC
• Maximum 0.5 A continuous, 10VA
• Data port RS‑232/422/485
• Software Control
• Unit Configuration Via web browser or Configuration Manager
• Flicker Control 50/60 Hz, selectable
• Software update Flash ROM, remote programmable
• Network
• Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
• FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
• SNTP, SNMP, 802.1x, UPnP
• Encryption TLS 1.0, SSL, AES (optional)
• Ethernet STP, 10/100 Base-T, auto-sensing, half/full
• duplex, RJ45
• PoE supply IEEE 802.3af compliant
• Mechanical
• Dimensions (H x W x L) 58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch)
• without lens
• Weight 542 g (1.195 lb) without lens
• Color RAL 9007 Metallic Titanium
• Tripod Mount Bottom (isolated) and top 1/4-inch 20 UNC
• Environmental
• Operating Temperature* -20°C to +50°C (-4°F to 122°F)
• Operating Temperature
• (IVA)*
• -20°C to +45°C (-4°F to 113°F)
• Storage Temperature -40°C to +70°C (-40°F to +158°F)
• Operating Humidity 20% to 93% RH
• Storage Humidity up to 98% RH
• * for extended temperature range use HAC-IPCCC
• Sold Sep. Contact us to order
• Accessories
• EX12LED‑3BD‑8M Infrared Illuminator
• EX12LED IR Illuminator, 850 nm, 30 deg
• beam
• EX12LED-3BD-8M
• EX12LED‑3BD‑8W Infrared Illuminator
• EX12LED, IR Illuminator, 850 nm, 60 deg
• beam
• EX12LED-3BD-8W
• EX12LED‑3BD‑9M Infrared Illuminator
• EX12LED IR Illuminator, 940 nm, 30 deg
• beam
• EX12LED-3BD-9M
• EX12LED‑3BD‑9W Infrared Illuminator
• EX12LED, IR Illuminator, 940 nm, 60 deg
• beam
• EX12LED-3BD-9W
• LTC 3364/21 Varifocal Lens IR corrected
• 1/3-inch, 2.8 – 6 mm, DC-iris, CS-mount
• F1.4-200, 4-pin
• LTC3364/21
• LTC 3664/30 Varifocal Lens IR corrected
• 1/3-inch, 3.0 – 8 mm, DC-iris, CS-mount
• F1.0-360, 4-pin
• LTC3664/30
• LTC 3664/40 Varifocal Lens IR corrected
• 1/3-inch, 2.8 – 11 mm, DC-iris, CS-mount
• F1.4-360, 4-pin
• LTC3664/40
• LTC 3674/20 Varifocal Lens IR corrected
• 1/3-inch, 7.5 – 50 mm, DC-iris, CS-mount
• F1.3-360, 4-pin
• LTC 3674/20
• LTC 3764/20 Varifocal Lens IR corrected
• 1/2-inch, 4 – 12 mm, DC-iris, C-mount
• F1.2-360, 4-pin
• LTC 3764/20
• LTC 3774/30 Varifocal Lens IR corrected
• 1/2-inch, 10 – 40 mm, DC-iris, C-mount
• F1.4-360, 4-pin
• LTC 3774/30
• UPA-2410-60 Power Supply
• 120 VAC, 60 Hz, 24 VAC, 10 VA Out
• UPA-2410-60
• UPA-2430-60 Power Supply
• 120 VAC, 60 Hz, 24 VAC, 30 VA Out
• UPA-2430-60
• UPA-2450-60 Power Supply
• 120 VAC, 60 Hz, 24 VAC, 50 VA Out
• UPA-2450-60
• UPA-2420-50 Power Supply
• 220 VAC, 50 Hz, 24 VAC, 20 VA Out
• UPA-2420-50
• UPA-2450-50 Power Supply
• 220 VAC, 50 Hz, 24 VAC, 50 VA Out
• For use with certain 24 VAC camera models.
• UPA-2450-50
• S1374 Adapter
• converts C mount lens to CS mount camera
• S1374
• HAC‑IPCCC Camera Cooling Case
• For use with Dinion IP cameras in combination
• with HSG and UHO Series housings
• equipped with an optional blower
• HAC-IPCCC
• Software Options
• MVC-FIVA4-CAM
• IVA 4.x VCA software license for IP camera/
• dome (e‑license)
• MVC-FIVA4-CAM
• MVC-FENC-AES BVIP AES 128 Bit
• Encryption
• BVIP AES 128‑bit encryption site license.
• This license is required only once per installation.
• It enables encrypted communication between
• BVIP devices and management stations.
• MVC-FENC-AES

Progressive scan
To capture sharp images, even in busy scenes with high
motion content, the Dinion camera uses progressive scan
technology.
Superior image quality
With a 1/3-inch CCD and Bosch’s advanced digital signal
processing, the Dinion2X Day/Night IP camera provides
outstanding image quality in virtually all situations. The
highly accurate 20-bit digital signal is automatically
processed to reveal every detail of the image in both the
high and low-light areas of the scene simultaneously.
20-bit Image Processing
The highly accurate digital signal processing optimally
captures the detail in both bright highlights and deep
shadows simultaneously. By combining 20-bit image
processing and wide dynamic range, the Dinion2X
maximizes the information visible in the picture even with
strong backlight.
Wide Dynamic Range
The superior wide dynamic range performance for all
lighting conditions reveals details previously unseen.
2X-Dynamic and SmartBLC
Using 2X-Dynamic technology, pixel-by-pixel analysis
provides the user with the most detailed information. Turn
on SmartBLC to automatically compensate the image
without the need for complicated set-up or without
compromising dynamic range. Features such as Autoblack
and Sharpness further improve the details in a scene,
pixel by pixel.
Programmable Modes
Six independent, pre-programmed operating modes
support typical applications, but are fully programmable
for individual situations.
Day/Night switching
In night mode, the camera enhances low light viewing by
switching the IR (infrared) filter out of the optical path
and providing a monochrome image. The camera can
switch from color to monochrome mode automatically by
sensing the illumination level, manually via the alarm
input, or remotely via a web browser. An internal, throughthe-
lens IR detector enhances monochrome mode stability
by preventing the camera from returning to color mode
when IR-illumination is dominant.
Privacy masking
Four different privacy zones allow specific parts of a
scene to be blocked. A mask for any part of the scene can
be pre-programmed.
Default Shutter
The default shutter speed captures fast moving objects
when sufficient light is available. When light levels fall and
other adjustments have been exhausted, the shutter
speed reverts to a standard setting to maintain sensitivity.
SensUp Dynamic
By increasing the integration time up to 10 times on the
CCD, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight
for illumination.
Efficient bandwidth and storage management
The cameras use H.264 compression, bandwidth
throttling, and multicasting capabilities to manage
bandwidth and storage requirements efficiently, while
delivering high image quality and resolution.
The bandwidth of an H.264 stream using Main profile at
4CIF resolution is about the same as one MPEG-4 stream
at 2CIF resolution.
Bosch's innovative tri-streaming feature enables Dinion IP
cameras to generate two independent H.264 streams and
one M-JPEG stream simultaneously. This allows streaming
of high-quality H.264 images for live viewing and recording
while streaming M-JPEG images to another device at the
same time. The M-JPEG video stream also provides easy
integration with third-party JPEG or M-JPEG-compatible
video management systems.
Dinion IP cameras offer unparalleled recording options.
Attached to the network, they can use iSCSI targets
directly without any additional recording software. The
recording capabilities of the system can be further
enhanced by using the Bosch Video Recording Manager.
The camera also supports local recording on a microSD
card. This can be used for local alarm recording or for
Automatic Network Replenishment (ANP) to improve the
overall reliability of video recording.
Standard intelligence
With built-in video content analysis, the camera reinforces
the Intelligence-at-the-Edge concept where edge devices
become increasingly intelligent. The MOTION+ video
motion analysis system, that is built into all camera
versions, is the perfect solution for applications where
basic video content analysis features are required. This
motion analysis algorithm is based on pixel change and
includes object size filtering capabilities and sophisticated
tamper-detection capabilities.
Hardware enhanced
The hardware-enhanced version of the camera gives you
the opportunity to upgrade the video content analysis
features of the camera with the more advanced Intelligent
Video Analysis (IVA) option. This option bases the IVA
algorithm on digital imaging technology that uses multilevel
image analysis of pixels, texture, and object
direction, and is activated by installing a license.
ONVIF conformance
The camera conforms to the ONVIF (Open Network Video
Interface Forum) specification which guarantees
interoperability between network video products
regardless of manufacturer. ONVIF conformant devices are
able to exchange live video, audio, metadata and control
information. They are automatically discovered and
connected to network applications such as video
management systems.
Unsurpassed flexibility
There are many ways to access the camera’s video: on a
PC using a web browser, with the Bosch Video
Management System, or with VIDOS. The camera is also
ideal for use with a Divar 700 Series digital video
recorder. By routing a video stream to a Bosch video
decoder, you can also present the video with ultimate
clarity on an analog monitor.
Cost effective, simple installation
Three power options, PoE (Power-over-Ethernet), 24 VAC
and 12 VDC are available. Using PoE makes installation
easier and more cost-effective, as cameras do not require
a local power source. To increase system reliability, the
camera can be simultaneously connected to both PoE and
12 VDC/24 VAC supplies. Additionally, uninterruptible
power supplies (UPS) can be used, which will allow
continuous operation, even during a power failure.
For trouble free network cabling, the cameras support
Auto-MDIX.
Dinion IP cameras have a service mode for easy
installation using the control buttons and an analog video
output on the camera as an alternative to configuration
over IP. The service mode is simply activated by pressing
a button on the camera. This routes the video to the
analog output, bypassing the IP video output. The On-
Screen Display (OSD) simplifies back focus adjustment
and network configuration, minimizing installation and
support costs. The Lens Wizard automatically detects the
lens type and helps focus the lens at the maximum
opening to maintain proper focus.
Easy Upgrade
Remotely upgrade the camera whenever new firmware
becomes available. This ensures up-to-date products, thus
protecting investment with little effort.
Access Security
Various security levels are available for accessing the
network, the camera, and the data channels. As well as
password protection with three levels, 802.1x
authentication using a RADIUS is supported. To secure
Web browser access use HTTPS with a SSL certificate
stored in the camera. For total data protection, the video
and audio communication channels can be independently
AES encrypted with 128‑bit keys by installing the optional
Encryption Site License.
Typical applications
• Prisons and correctional facilities
• Traffic monitoring (air, land and sea)
• Hotels, bars and nightclubs
• Commercial and government buildings
• City surveillance and safety
• Border control