 |
 |
 |
|
The Bosch NEI-809V04-21W Infrared Imager (4-9 mm, 940 nm, White) features a 4-9 mm varifocal auto-iris lens, a day/night dual sensor consisting of a 1/3" color SuperHAD CCD that delivers enhanced daytime color, and a 420TVL 1/3" LXR CCD for efficient night vision imaging.
It features Intelligent Video Analysis (IVA) that analyzes scene activity and flags user-defined events such as alarms (additional license required). The IP Infrared Imager has a minimum illumination of 0 lux. It offers a wavelength of 940 nm and the Black Diamond High Fidelity Infrared technology that lessens image noise, provides higher compression, delivers detection-level imaging up to 200' (60m), and removes hotspot foregrounds and underexposed backgrounds.
The NEI-809V04-21W Infrared Imager uses a video encoder that is supported by a number of VMS and NVR (Network Video Recorder) solutions, and allows MPEG-4 and MJPEG at 30fps. It features tri-streaming support, which helps deliver high resolution imaging.
Bandwidth network impact of the imager is lower than standard IP cameras while an infrared-corrected lens eliminates focus shift and infrared bleed. The NEI-809V04-21W Infrared Imager comes in a NEMA 4X approved tough aluminum housing that comes with a cable-managed wall bracket, and has a sliding optical chassis that simplifies optical adjustments. It draws power from a 12 VDC or 24 VAC power supply.
Specifications:
Sensor:
Color: C5 Hi-Res Color CCD
B/W: SX3 Monochrome CCD
Effective Pixels:
Color: 768 x 494
B/W: 510 x 492
Resolution:
Color: 480 TVL
B/W: 420 TVL
Signal to Noise Ratio:
Color: Greater than 48 dB
B/W: Greater than 50 dB
Minimum Illumination:
Daytime: Color: 1 lux at F2
B/W: 1 lux at F2
Nighttime: 0.0 lux (works in total darkness)
Lens: 4-9mm varifocal auto-iris
Gamma: 0.45
Gamma: 0.45
Video Output: 1 Vpp, 75 ohm (BNC)
Day/Night:
Day-Night Switching: Photocell-controlled, automatic
Photocell: Automatic, sensitivity adjustable
LEDs: Black Diamond High-Fidelity Infrared, intensity adjustable
Wavelength: 940 nm (covert)
Ethernet: 10/100 Base-T RJ45
Network Protocol: Telnet, RTP, HTTP(S), ARP,TCP, UDP, IP, ICMP, DHCP, IGMPv2/v3, SNMP, 802.1x
Compression: MPEG-4 SP and MJPEG, up to 30 frames per second, tri-stream selectable
Frame Rate: 1-30 FPS programmable (full motion)
Bandwidth: Configurable from 9.6 Kbps to 6 Mbps
Frame Rate:
4CIF: 30 IPS / 704 x 480
2CIF: 25/30 IPS / 704 x 240
Half D1: 30 IPS / 352 x 480
CIF: 30 IPS / 352 x 240
QCIF: 30 IPS / 176 x 120
Power Requirements: 12 VDC or 24 VAC
Power Consumption: 36 W max
Construction: Robust aluminum casting
Finish: Baked enamel finish
Bracket: Cable managed wall bracket included
Dimensions (HxWxD): 5.2 x 5.5 x 8.2" (131 x 139 x 207mm)
Weight: 3.4 lb (1.4 kg)
Operating Temperature: -58 ~ 122°F (-50 ~ 50°C)
Environment: NEMA 4X compliant
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 4-9 mm varifocal auto-iris lens
- 1/3" color SuperHAD CCD delivers enhanced daytime color
- 420TVL 1/3" LXR CCD for night vision imaging
- Intelligent Video Analysis (IVA) flags user-defined events such as alarms (additional license required) and analyzes scene activity
- Minimum illumination - 0 lux
- Offers a wavelength of 940 nm
- Black Diamond Technology lessens image noise, provides higher compression, delivers detection-level imaging up to 200' (60m), and removes hotspot foregrounds and underexposed backgrounds
- Bandwidth network impact is lower than standard IP cameras
- Infrared-corrected lens eliminates focus shift and infrared bleed
- NEMA 4X approved tough aluminum housing with cable-managed wall bracket
- Sliding optical chassis simplifies optical adjustments
- Power supply - 12 VDC or 24 VAC
- NTSC
|
|
|
|
|
|
|
|
|
