 |
 |
 |
|
The Bosch NEN-070V04-21W Ceiling-Mounted No-Grip IP Camera (4-9 mm), with a 1/3" CCD sensor and a 4-9 mm varifocal auto-iris lens, delivers high-quality imagery at a resolution up to 540TVL. With the no-grip design, the camera is almost impossible to be gripped or removed forcibly, hence is suitable for surveillance purposes at high-risk locations.
Intelligent Video Analysis (IVA), besides flagging user-defined events such as alarms (additional license required), also analyzes scene activity. The video encoder is supported by a number of VMS and NVR (Network Video Recorder) solutions, and allows MPEG-4 and MJPEG at 30fps, while tri-streaming support helps deliver high resolution imaging. Besides, it can be easily integrated with IP network infrastructure and video analytics. Mechanical filter technology provides clear daytime color and enhanced performance under low light conditions.
Conduit compatibility simplifies installations into electrical fittings. The Pan-Tilt-Twist gimbals allow the camera to remain horizontal even as its support tips for quick and easy CCD and lens adjustments. The gimbal minimizes installation time and does not require any tools, while the detachable platform allows the camera base and the housing platform to be mounted separately, thus allowing the camera to be located at a place other than the ceiling.
Using Video Patch Connector, the Video Patch Lead (VPL) allows portable monitors to be used for setup and trouble-shooting. The camera draws power from a 12-24 VAC/VDC power supply.
With the die-cast aluminum construction, the NEN-070V04-21W Ceiling-Mounted No-Grip IP Camera is protected against harsh environments.
Specifications:
Image Sensor: M4 day/night CCD with MFP technology
Resolution: 540 TVL color / 540 TVL monochrome
Effective Pixels: 768 x 494
Sensitivity: 0.06 Lux with F1.4 lens
Signal to Noise Ratio: Greater than 48dB
Output Signal: 1 Vpp, 75 Ohm (BNC)
Gamma: 0.45
Gain: AGC (with on/off switch)
Electronic Iris: 1/60 to 1/100,000
Lens: 4-9 mm IR corrected varifocal lens
Network: Interface: 10/100 Base-T RJ45
Protocols: Telnet, RTP, HTTP(S), ARP, TCP, UDP, IP, ICMP, DHCP, IGMPv2/v3, SNMP, 802.1x
Compression: MPEG-4 SP and MJPEG, up to 30 frames per second, tristream selectable
Frame Rate: 1-30 FPS programmable (full motion)
Bandwidth: Configurable from 9.6 Kbps to 6 Mbps
Frame Rate:
4CIF: 30 IPS / 704 x 480
2CIF: 25/30 IPS / 704 x 240
Half D1: 30 IPS / 352 x 480
CIF: 30 IPS / 352 x 240
QCIF: 30 IPS / 176 x 120
Construction: Construction: Robust aluminum casting, painted steel with flush removable front panel and tamper-resistant screws
Window: 0.2" (5.1 mm) polycarbonate
Power Requirements: 12-24 VAC (50/60 Hz), 12-24 VDC
Power Consumption: 9 W max.
Operating Temperature: -13 ~ 140°F (-25 ~ 60°C)
Dimensions: 11.3 x 5.4 x 3.7" (286 x 138 x 95 mm)
Weight: 2.6 lbs (1.2kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1/3" CCD sensor / 4-9 mm varifocal auto-iris lens
- Resolution - up to 540TVL
- No-grip design - camera is almost impossible to be gripped and removed forcibly
- Intelligent Video Analysis (IVA) flags user-defined events and analyzes scene activity
- Includes a high performance video encoder that supports tri-streaming, MPEG-4 and MJPEG at 30fps, and a wide range of VMS and NVR solutions and easily integrates with IP network infrastructure and video analytics
- Conduit compatibility simplifies installations into electrical fittings
- The Pan-Tilt-Twist gimbals allow the camera to remain horizontal even as its support tips, for quick and easy CCD and lens adjustments
- Detachable platform allows the camera to be located at a location other than the ceiling
- Using Video Patch Connector, the Video Patch Lead (VPL) allows portable monitors to be used for setup and troubleshooting
- Die-cast aluminum construction coupled with weather sealing protects against harsh environments
|
|
|
|
|
|
|
|
|
