 |
 |
 |
|
The Bosch NTC-255-PI Day/Night Infrared IP Bullet Camera integrates high-performance technology into the realm of network security to bring an affordable surveillance solution to small offices and retail businesses. Through the use of a 1/4" CMOS sensor and 3.7 to 10mm varifocal lens, this camera is capable of producing high quality imagery at resolutions of up to 640 x 480 pixels. Furthermore, it can even record footage at 1 lux (IR on) and 0 lux (IR on) illumination.
The tri-stream video feature enables generation of 2 independent H.264 streams and 1 M-JPEG stream simultaneously. You can use the H.264 streams for local recording and viewing, while the M-JPEG stream can be used with legacy DVRs.
Thirty-two integrated IR LEDs in the camera unit offer night vision up to 82' (25 m) for surveillance even in extremely low-light (0 lux). A built-in IR illuminator turns on automatically as per ambient lighting conditions for round the clock surveillance.
With the camera, you get 16-channel PC surveillance software that provides a user-friendly interface for easy camera installation and configuration. You can set up and monitor multiple cameras simultaneously on a single screen via the software's built-in wizard. In addition, recorded footage can be archived and searched using a single application.
Rated IP66, the camera's aluminum housing offers protection against dust and water, making it suitable for both indoor and outdoor applications. Tamper detection determines any kind of anomalies in the output signal or unauthorized camera access, while the motion detection triggers an alarm when any movement is detected in a designated area.
Conforming to the ONVIF (Open Network Video Interface Forum) standard, this bullet camera works smoothly with other surveillance, for hassle free upgrades in the future. PoE (Power over Ethernet) uses a single cable to power and control the camera from the network itself without any extra wiring for auxiliary power outlets.
High-Performance Surveillance System:
Ideal for small offices and retail businesses
1/4" CMOS sensor and 3.7 to 10mm varifocal lens helps to capture crystal clear images at a resolution of up to 640 x 480 pixels
Record footage at 1 lux (IR off) and 0 lux (IR on) illumination
Tamper detection for identifying any changes in the output signal or unauthorized camera access
Motion detection triggers an alarm when a movement is detected in the video
Recording & Compression:
H.264 compression allows for optimal use of the available network and storage resources without compromising image quality
Records VGA and QVGA resolution videos at 30 fps
Progressive scanning eliminates visual artifacts that may hamper the quality of the captured images
Tri-streaming video feature generates two H.264 streams for local recording and one M-JPEG stream for use with legacy DVRs
Archive, search, and export video clips in a single application
Low-Light Functionality:
Built-in IR illuminator helps camera capture images even in extremely low-light (0 lux)
32 IR LEDs offer night vision up to 82' (25 m) for round-the-clock surveillance
Surveillance Software:
Provides user-friendly interface for easy camera installation and configuration
Built-in wizard for simultaneously monitoring and configuring multiple cameras
Construction & Safety:
Housed in a robust aluminum housing
IP66 rating guarantees resistance to dust and water, making the camera suitable for both indoor and outdoor applications
Compatibility:
Works with Divar 700 Series recorder as well as iSCSI server connected via the network to store long-term recordings
ONVIF compliance ensures compatibility with other surveillance products to reduce further upgrade or migration costs
Power:
PoE powers and controls the camera from the network itself
Consumes only 6 W of power
Specifications:
Video:
Sensor: 1/4" CMOS
Pixels: 640 x 480
Sensitivity: 1.0 lux (IR off)
0 lux (IR on)
Video Resolution: VGA, QVGA
Video Compression: H.264 MP (Main Profile)
H.264 BP+ (Baseline Profile Plus)
M-JPEG
Frame Rate: 30 fps
Night Vision:
Distance: 82' (25 m)
LED: 32 LED High Efficiency Array, 850 nm
Lens:
Lens Type: Varifocal 3.7 to 10mm, DC Iris F1.4 to Close, D/N Switch
Lens Mount: Board Mounted
Connection:
Analog Video Output: 2.5mm Jack for Installation Only
Alarm Inputs: Short or DC 5V Activation
Connectors Relay Output: Input Rating Maximum 1 A 24 VAC/VDC
Audio:
Audio Input: Line in Jack Connector
Audio Output: Line out Jack Connector
Audio Communication: Two-way, Full Duplex
Audio Compression: G.711, L16 (Live and Recording)
Software Control: Unit Configuration: Via Web Browser or PC Surveillance Software
Network:
Protocols: HTTP, HTTPs, SSL, TCP, UDP, ICMP, RTSP, RTP, Telnet, IGMPv2/v3, SMTP, SNTP, FTP, DHCP client, ARP, DNS, DDNS, NTP, SNMP, UPnP, 802.1x, iSCSI
Ethernet: 10/100 Base-T, Auto-sensing, Half/Full Duplex, RJ45
PoE: IEEE 802.3af Compliant
Power:
Input Voltage: +12 VDC or Power over Ethernet
Power Consumption: 6 W (Maximum)
Environmental:
Operating Temperature: -4 to 131° F (-20 to +55° C)
Storage Temperature: -4 to 158° F (-20 to 70° C)
Humidity: 10% to 80% Relative Humidity (Non Condensing)
Certifications and Approvals:
Safety:
EU: EN 60950-1: 2006, Reference IEC 60950-1:2005
US: UL 60950-1: 1st Edition Dated October 31, 2007
Canada: CAN/CSA-C22.2 NO. 60950-1-03
EMC Certification:
EN 50130-4:1995 + A1:1998 + A2:2003
FCC Part15 Subpart B, Class B
EMC Directive 2004/108/EC
EN 55022 Class B
EN 61000-3-2 :2006
EN 61000-3-3 : 1995+A1 :2001+A2 :2005
EN 55024
AS/NZS CISPR 22 (Equal to CISPR 22)
ICES-003 Class B
EN 50121-4:2006
Certifications: CE, FCC, UL, cUL, C-tick, CB, VCCI
Ingress Protection Rating: IP66
Dimensions: 3.94 x 3.94 x 11.46" (100 x 100 x 291mm)
Weight: 3.42 lb (1.55 kg)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1/4" CMOS Sensor
- 3.7 to 10mm Varifocal Lens
- Resolution Up to 640 x 480 pixels
- Tri-Streaming Video Profile
- 32 LED High Efficiency Array
- Night Vision up to 82' (25 m)
- Tamper & Motion Detection
- 16-Channel PC Surveillance Software
- IP66-rated / Sturdy Aluminum Housing
- ONVIF / PoE Compliant
|
|
|
|
|
|
|
|
|
