You are here: Home > CCTV / Surveillance > CCTV Cameras > Network IP Cameras >

Box Network IP Cameras for Security Surveillance Systems

We found 57 results matching your criteria.
Box cameras with IP connectivity go all the way when it comes to remote operation. Security Store USA provides a number of box network IP cameras designed for indoor and outdoor use that can be supplied with power over Ethernet or through standard electrical connections. High definition imagery supported by low light or infrared vision and automatic iris control guarantee quality video feeds despite remote location.
Sort By:
Page of 5
ACTi Corporation ACM-5001 - M-JPEG/MPEG4 IP CAMERA BUNDLED F4.2MM/F1.8 LENS ACTi Corporation CAM-5201HN - MPEG-4 Real-time Network Streaming IP Camera with Audio

Main Features

• 1/3” Micron Progressive Scan CMOS
• Day and night function with Mechanical IR Cut Filter • Bundled with f4.2mm / F1.8 fixed lens
• 0.5 Lux at F1.8
• Shutter Speed, White Balance, Exposure, Gain Controls supported
• Selectable MPEG-4 / MJPEG compression
• VGA resolution at 30 fps
• Multi-stream with variable frame rate in the same compression
• Two-way audio supported
• Hardware motion detection, Digital Input/Output
• DC 12 V or Power over Ethernet (IEEE 802.3af) supported


Device: Micron Progressive Scan CMOS
Size: 1/3 inch
Effective Pixels: 640 x 480
Color: 0.5 Lux at F1.8 (30 IRE,MAX AGC)
B/W: N/A
CDS Sensor: N/A
IR Sensitivity: N/A
Lens Mount: C /CS (with adaptor)
Focal Length: f4.2 mm / F1.8
Viewing Angle: 75° (Horizontal)
Sync. System: Internal
Mechanical IR Cut Filter: N/A
Motion Detection: Yes (3 Windows)
Electronic Shutter: 1/10 ~ 1/2,000 sec. (60Hz); 1/10 ~ 1/2,000 sec. (50Hz)
Flickerless: 1/120 sec. (60Hz); 1/100 sec. (50Hz)
BLC: Yes
AGC: Automatic (User defined)
White Balance: 6 modes (AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL) configurable
S/N Ratio: Better than 44 dB
Compression: MPEG-4 SP, MJPEG selectable
Picture Resolution: VGA (640x480)
QVGA(320x240)
QQVGA(160x120)
Image Frame Rate: 30 fps at VGA resolution
Compression: 8 kHz, Mono, PCM
Audio Line Input: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Compression: 8 kHz, Mono, PCM
Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
Digital Input: 1, terminal block
Transistor Output: 1, terminal block
Reset Button: Factory default
LED: System status
Ethernet: Ethernet(10/100Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPP
Web Browser: Microsoft Internet Explorer 6.0 or above
SDK: ActiveX control, C SDK
Security: Password protection: configured by the administrator
Temperature: 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
Power Requirement: PoE (IEEE802.3af) with Class 3
Power Consumption: 3.3 W (DC 12 V)
4.3 W (PoE)
Dimensions (WxHxD): 67 mm x 55 mm x 129.5 mm
(2.64” x 2.17” x 5.10”)
Weight: 400 g (0.88 lb)
MPEG-4 compression gives a high resolution image quality
The CAM-5200 series MPEG-4 IP Camera adopts MPEG-4 Advanced Simple Profile (ASP) compliant compression technology to perform full D1 (4 CIF) resolution. It utilizes the premium 1/3" SONY color CCD sensor, and has horizontal resolution of 480 TV lines. The real-time image transmission is 30 fps (720 x 480 pixels, NTSC) and 25 fps (720 x 576 pixels, PAL).

Advanced network technologies enable real-time surveillance
With the LAN and WAN ports built-in, the CAM-5200 series applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. CAM-5200 series supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth. With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-5200 series delivers smooth ananlog-video like transmission over LAN or WAN to reach true remote video surveillance goal. The CAM-5200 series not only supports DDNS, but also has a built-in web server to enable authorized users to do live-viewing and adjust the camera setting via remote web browsers.
Sophisticate Design
In addition to support of the DC and a video auto iris lens, the CAM-5200 series also has DIP-switch controlled functions including backlight compensation, auto white balance, auto gain control and flickerless for different application conditions. With Super Gain Control mechanism, it will switch to color and monochrome picture automatically (CAM-5220).

• 1/3” Sony SuperHAD / EXviewHAD CCD
• Day and night function with Mechanical IR Cut Filter (CAM-5221)
• 0.15 Lux (CAM-5201) / 0.05 Lux (CAM-5221) at F1.8
• Backlight Compensation, Auto Iris Control, Auto White Balance Supported
• MPEG-4 ASP compression
• CIF up to Full D1 resolution at 30/25 FPS
• Multi-stream with variable frame rate in the same compression
• One-way audio supported
• Hardware motion detection, Digital Input/Output
• Fail-over network protection and QoS enabled (L3) video streaming
• Hybrid analog and ethernet video output with 480 TV lines
• DC 12 V or Power Over Ethernet (IEEE 802.3af) Supported

ACTi Corporation CAM-5201N -MPEG-4 NTSC IP CAMERA 480 TV LINE ACTi Corporation CAM-5320N - MPEG-4 DAY/NIGHT IP CAMERA
MPEG-4 compression gives a high resolution image quality
The CAM-5200 series MPEG-4 IP Camera adopts MPEG-4 Advanced Simple Profile (ASP) compliant compression technology to perform full D1 (4 CIF) resolution. It utilizes the premium 1/3" SONY color CCD sensor, and has horizontal resolution of 480 TV lines. The real-time image transmission is 30 fps (720 x 480 pixels, NTSC) and 25 fps (720 x 576 pixels, PAL).

Advanced network technologies enable real-time surveillance
With the LAN and WAN ports built-in, the CAM-5200 series applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. CAM-5200 series supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth. With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-5200 series delivers smooth ananlog-video like transmission over LAN or WAN to reach true remote video surveillance goal. The CAM-5200 series not only supports DDNS, but also has a built-in web server to enable authorized users to do live-viewing and adjust the camera setting via remote web browsers.
Sophisticate Design
In addition to support of the DC and a video auto iris lens, the CAM-5200 series also has DIP-switch controlled functions including backlight compensation, auto white balance, auto gain control and flickerless for different application conditions. With Super Gain Control mechanism, it will switch to color and monochrome picture automatically (CAM-5220).

• 1/3” Sony SuperHAD / EXviewHAD CCD
• Day and night function with Mechanical IR Cut Filter (CAM-5221)
• 0.15 Lux (CAM-5201) / 0.05 Lux (CAM-5221) at F1.8
• Backlight Compensation, Auto Iris Control, Auto White Balance Supported
• MPEG-4 ASP compression
• CIF up to Full D1 resolution at 30/25 FPS
• Multi-stream with variable frame rate in the same compression
• One-way audio supported
• Hardware motion detection, Digital Input/Output
• Fail-over network protection and QoS enabled (L3) video streaming
• Hybrid analog and ethernet video output with 480 TV lines
• DC 12 V or Power Over Ethernet (IEEE 802.3af) Supported

MPEG-4 compression gives a high resolution image quality
The CAM-5300 series MPEG-4 IP Camera adopts MPEG-4 Advanced Simple Profile (ASP) compliant compression technology to perform full D1 (4 CIF) resolution. It utilizes the premium 1/3" SONY color CCD sensor, and has horizontal resolution of 480 TV lines. The real-time image transmission is 30 fps (720 x 480 pixels, NTSC) and 25 fps (720 x 576 pixels, PAL).

Advanced network technologies enable real-time surveillance
With the LAN and WAN ports built-in, the CAM-5300 series applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. CAM-5300 series supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth. With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-5300 series delivers smooth ananlog-video like transmission over LAN or WAN to reach true remote video surveillance goal. The CAM-5300 series not only supports DDNS, but also has a built-in web server to enable authorized users to do live-viewing and adjust the camera setting via remote web browsers.
Sophisticate Design
In addition to support of the DC and a video auto iris lens, the CAM-5300 series also has DIP-switch controlled functions including backlight compensation, auto white balance, auto gain control and flickerless for different application conditions. With Super Gain Control mechanism, it will switch to color and monochrome picture automatically (CAM-5320).

• 1/3” Sony SuperHAD / EXviewHAD CCD
• Day and night function with Mechanical IR Cut Filter (CAM-5321)
• 0.15 Lux (ACM-5301) / 0.05 Lux (ACM-5321) at F1.2
• Backlight Compensation, Auto Iris Control, Auto White Balance Supported
• MPEG-4 ASP compression
• CIF up to Full D1 resolution at 30/25 FPS
• Multi-stream with variable frame rate in the same compression
• Hardware motion detection, Digital Input/Output
• Fail-over network protection and QoS enabled (L3) video streaming
• Hybrid analog and ethernet video output with 480 TV lines
• DC 12 V or Power Over Ethernet (IEEE 802.3af) Supported

ACTi Corporation CAM-5321HN - MPEG-4-DAY/NIGHT IP CAMERA D1 RESOLUTION WITH 480TVL SONY EXVIEWWHAD - CCD MODULE.POE,POWER ADAPTER-ACTI STREAMING ACTIVATOR S/W ACTi Corporation CAM-5321N - MPEG-4 DAY & NIGHT IP CAM D1 RESOLUTION
MPEG-4 compression gives a high resolution image quality
The CAM-5300 series MPEG-4 IP Camera adopts MPEG-4 Advanced Simple Profile (ASP) compliant compression technology to perform full D1 (4 CIF) resolution. It utilizes the premium 1/3" SONY color CCD sensor, and has horizontal resolution of 480 TV lines. The real-time image transmission is 30 fps (720 x 480 pixels, NTSC) and 25 fps (720 x 576 pixels, PAL).

Advanced network technologies enable real-time surveillance
With the LAN and WAN ports built-in, the CAM-5300 series applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. CAM-5300 series supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth. With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-5300 series delivers smooth ananlog-video like transmission over LAN or WAN to reach true remote video surveillance goal. The CAM-5300 series not only supports DDNS, but also has a built-in web server to enable authorized users to do live-viewing and adjust the camera setting via remote web browsers.
Sophisticate Design
In addition to support of the DC and a video auto iris lens, the CAM-5300 series also has DIP-switch controlled functions including backlight compensation, auto white balance, auto gain control and flickerless for different application conditions. With Super Gain Control mechanism, it will switch to color and monochrome picture automatically (CAM-5320).

• 1/3” Sony SuperHAD / EXviewHAD CCD
• Day and night function with Mechanical IR Cut Filter (CAM-5321)
• 0.15 Lux (ACM-5301) / 0.05 Lux (ACM-5321) at F1.2
• Backlight Compensation, Auto Iris Control, Auto White Balance Supported
• MPEG-4 ASP compression
• CIF up to Full D1 resolution at 30/25 FPS
• Multi-stream with variable frame rate in the same compression
• Hardware motion detection, Digital Input/Output
• Fail-over network protection and QoS enabled (L3) video streaming
• Hybrid analog and ethernet video output with 480 TV lines
• DC 12 V or Power Over Ethernet (IEEE 802.3af) Supported

MPEG-4 compression gives a high resolution image quality
The CAM-5300 series MPEG-4 IP Camera adopts MPEG-4 Advanced Simple Profile (ASP) compliant compression technology to perform full D1 (4 CIF) resolution. It utilizes the premium 1/3" SONY color CCD sensor, and has horizontal resolution of 480 TV lines. The real-time image transmission is 30 fps (720 x 480 pixels, NTSC) and 25 fps (720 x 576 pixels, PAL).

Advanced network technologies enable real-time surveillance
With the LAN and WAN ports built-in, the CAM-5300 series applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. CAM-5300 series supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth. With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-5300 series delivers smooth ananlog-video like transmission over LAN or WAN to reach true remote video surveillance goal. The CAM-5300 series not only supports DDNS, but also has a built-in web server to enable authorized users to do live-viewing and adjust the camera setting via remote web browsers.
Sophisticate Design
In addition to support of the DC and a video auto iris lens, the CAM-5300 series also has DIP-switch controlled functions including backlight compensation, auto white balance, auto gain control and flickerless for different application conditions. With Super Gain Control mechanism, it will switch to color and monochrome picture automatically (CAM-5320).

• 1/3” Sony SuperHAD / EXviewHAD CCD
• Day and night function with Mechanical IR Cut Filter (CAM-5321)
• 0.15 Lux (ACM-5301) / 0.05 Lux (ACM-5321) at F1.2
• Backlight Compensation, Auto Iris Control, Auto White Balance Supported
• MPEG-4 ASP compression
• CIF up to Full D1 resolution at 30/25 FPS
• Multi-stream with variable frame rate in the same compression
• Hardware motion detection, Digital Input/Output
• Fail-over network protection and QoS enabled (L3) video streaming
• Hybrid analog and ethernet video output with 480 TV lines
• DC 12 V or Power Over Ethernet (IEEE 802.3af) Supported

ACTi Corporation CAM-7301N - Outdoor PoE Dome IP Camera APPRO B7-7224 IP Camera, 400 TVL Up To 30 FPS 1/4" CCD - APPRO B7-7224

ACTi CAM-7301N Outdoor PoE Dome IP Camera

The ACTi CAM-7301N has advanced network technologies that enable real-time surveillance. With the LAN and WAN ports built-in, the CAM-7301N applies QoS (Quality of Service, IEEE 802.1Q) technology to fully utilize the network bandwidth. The CAM-7301N supports automatic (or manual) frame rate control for concurrent video streams accessing at different network bandwidth. With advanced MPEG-4 ASP compliant video compression and QoS-enabled streaming, the CAM-7301N delivers smooth analog-video like transmission over LAN or WAN to reach true remote video surveillance goal.

ACTi CAM-7301N Outdoor PoE Dome IP Camera

The CAM-7301N not only supports DDNS, but also has a built-in web server to enable authorized users to do live-viewing and adjust the camera setting via remote web browsers. The CAM-7301N supports Power over Ethernet.

The CAM-7301N is the same camera as the CAM-7300N except that it supports PoE rather than 12 V AC Power.

ACTi CAM-7301N Features:

  • 1/3" SONY SuperHAD CCD
  • Min. 0.05 Lux at F=1.2 (30 IRE, SAGC ON)
  • Backlight Compensation, Auto Iris Control, Auto White Balance supported
  • Heavy-duty, weatherproof and vandal proof with IP66 protection
  • Surface, Flush and Wall mount supported
  • MPEG-4 ASP compliant compression
  • CIF up to Full D1 resolution at 30 FPS
  • QoS enabled (L3) video streaming
  • Two-way audio supported
  • Power Over Ethernet (IEEE 802.3af) supported

ACTi CAM-7301N Specifications:

Device: SONY SuperHAD CCD
Size: 1/3 inch
Effective Pixels: 811 x 508
Horizontal Resolution: 540 TVL
Lens Focal Length: 3.8 ~ 9.5 mm
Motion Detection: Yes (3 windows)
Electronic Shutter: 1/60 ~ 1/100,000 sec.
Compression: MPEG-4 ASP compliant
Audio Line Input: Unbalanced, 1.4 Vp-p, 1Vrms, terminal block
Audio Line Output: Unbalanced, 1.4 Vp-p, 1Vrms, terminal block
Casing: Weatherproof casing with IP66 standard
Vandal Proof: Vandal proof supports, durability up to 702 KgF
Mount Types: Surface / Flush / Wall
Lan Port: Ethernet (10/100Base-T), RJ-45 connector
Wan Port: Ethernet (10/100Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP
Web Browser: Microsoft Internet Explorer 6.0 or above
Security: Password Protection: configured by the administrator
Heater / Fan: Yes (built-in)
Operating Temperature: -5 C ~ 50 C (7 F ~ 122 F) for PoE
Power Requirement: PoE (IEEE802.3af) with Class 3
Weight: 1,145 g (2.5 lb)
APPRO B7-7224 IP Camera, 400 TVL Up To 30 FPS 1/4" CCD - APPRO B7-7224

D-Link DCS-1110  - SECURECAM Network 10/100 Fast Ethernet PoE Internet Camera - DCS1110 D-Link DCS-3110 - 10/100 FIXED IP NETWORK CAMERA, 1.3 MEGAPIXEL CMOS, 1.5 LUX, DAY & NIGHT, 6MM LENS, MPEG-4 & MJPEG, 2-WAY AUDIO, 3G, POE - DCS3110
EASY INSTALLATION AND PLACEMENT
With support for 802.3af Power over Ethernet (PoE) and a slim-line housing, the DCS-1110 is D-Link’s most versatile camera yet. PoE support, when used with a compatible PoE power injector or PoE switch, eliminates the need for mounting the camera near a power supply. With 0.5 Lux light sensitivity, this camera is capable of capturing video in rooms with minimal lighting, making it ideal for use at night. When enclosed in an optional outdoor housing, the DCS-1110 makes an excellent home security camera. Featuring PoE support and bundled with IP View SE, it is a cost-effective and versatile security solution for your home or business.

ACCESS YOUR CAMERA ONLINE
You can access and control your camera using Internet Explorer. As you watch and listen remotely to video and sound obtained by the DCS-1110, you can record directly from the web browser to a local hard drive, making it ideal for capturing any moment no matter where you are.

By signing up with one of the many free Dynamic DNS services available on the web, you can assign an easy-to-remember web address to the camera. Remotely access your camera without having to remember the IP address, even if your Internet Service Provider changes it.

MULTIPLE MANAGEMENT OPTIONS
IP View SE software is included to enhance the monitoring and management of the DCS-1110. Manage and monitor up to four compatible cameras simultaneously with this program. You can also use IP View SE to archive video straight to the hard drive, playback video, set up motion detection to trigger video/audio recording and send e-mail alerts. The DCS-1110 is configurable to record to a network-attached storage (NAS) device, eliminating the need to set up a dedicated computer for storing recorded video.

This camera also works great with D-Link’s MediaLounge™ family of home entertainment products. After setting up the DCS-1110 to record to your PC’s hard drive or a network-attached storage device, captured video can be played back using any of the MediaLounge Wireless Media Players. You can even configure your MediaLounge Wireless Media Player to connect to the DCS-1110 and play real-time video feed on your TV screen!

The DCS-1110, featuring PoE support and bundled with IP View SE, is a cost-effective and versatile security solution for your home or business.

Features:
• 1/4” Megapixel CMOS Sensor
• Built-in Removable IR-cut Filter for Day & Night Feature
• CF Card Slot for Front-End Storage
• Real-Time MPEG-4 and MJPEG Compression
• Power over Ethernet (PoE) Built-in
• 3GPP Mobile Surveillance/SIP 2-Way Audio

Specifications: General :
  • Sensor: 1/4” 1.3 Megapixel Progressive Scan CMOS
  • Removable IR-cut Filter: Auto/Schedule/Manual
  • Minimum Illumination: 1.5 Lux @ F2.0
  • 3A Control: AGC, AWB, AES
  • Electronic Shutter: 1/60 sec. ~1/100,000 sec.
  • Lens: 6mm, F1.6
  • Audio:
  • Built-in Omni-directional Microphone
  • Supports Two-way Audio by SIP*
  • Supports Hardware and Software Audio Mute
  • External Microphone Input
  • External Speaker Output
  • Video Resolution:
    - Up to 30fps at 176x144
    - Up to 30fps at 320x240
    - Up to 30fps at 640x480
    - Up to 8 Frames at 1280x1024
  • Network Connectivity
    - 10/100 Mbps Fast Ethernet Auto Negotiation
    - 802.3af Power over Ethernet (PoE)**
  • I/O Connectors:
    - 1x Input (2 pins), 1x Output (2 pins)
    - 12V DC Output for IR Light (2 pins)
    - RS-485 (2 pins)
    - 4-Pin Auto Iris Lens Connector
  • Operating Temperature: 32° to 104°F (0° to 40°C
  • Storage Temperature: -4° to 158°F (-20° to 70°C)
  • Humidity: 20 ~ 80% RH (Non-condensing)
  • Certifications: FCC Class B, CE, IC, C-Tick
  • LEDs: Link, Power, Activity
  • Power Input: External Power Supply- 12V DC 1.5A
  • Power Consumption 6 Watts Maximum
  • Dimensions (W x D x H) • Item: 7.1” x 7.6” x 4.2” (180.3mm x 193mm x 106.7mm)
  • Package: 9.7” x 11.3” x 3.3” (246.4mm x 287mm x 83.8mm)
  • Weight
    - Item: 1.4 lbs (0.64 kg)
    - Package: 3.3 lbs (1.50 kg)
  • Software:
    - Video Algorithm Supported
    - Simultaneous Dual-Stream Support (MPEG-4 and MJPEG)
    - Simultaneous Profile Support for Web Viewing, 3G Mobile Viewing***, and Video Recording
    - JPEG Compression for Still Images
  • Remote Management
  • Camera Configuration and Camera System Log (viewed via a Java-Enabled Web Browser)
  • Take Snapshots and save to Hard Drive via a Web Browser
  • D-ViewCam™ 2.0
  • Network Protocols: IPv4 DHCP ARP DNS DDNS (D-Link) TCP/IP HTTP UPnP™ Port Forwarding SMTP Samba FTP PPPoE NTP (D-Link) RTP UDP RTSP ICMP RTCP 3GPP IP filtering
  • Minimum Requirements To View: Java-Enabled Web Browser (Internet Explorer v6.0 or later, Safari, Firefox, Opera, etc)
  • To Run D-ViewCam™ Software: Operating System: Windows Vista®, Microsoft Windows® XP****; Web Browser: Internet Explorer v6 or later; Protocol: Standard TCP/IP
  • Warranty • 1 Year-Limited*****

    * Use of audio or video equipment for recording the image or voice of a person without their knowledge and consent is prohibited in certain states or jurisdictions. The end-user assumes all liability for compliance with applicable state, local, and federal laws.
    ** A PoE switch or router is required to provide power via the Ethernet connection.
    *** The mobile device must be Internet-ready. Support Real Time Streaming Protocol (RTSP) and be equipped with a 3G video player such as PacketVideo™, Quicktime™, or RealPlayer™, and have Internet access.
    **** Computer must adhere to Microsoft’s recommended system requirements. Please contact Microsoft for details.
    ***** 1-Year Limited Warranty available only in the USA and Canada.
  • Digimerge DNP5220E High Resolution Low Light Dual-codec Professional Network Camera HCX13MW  1/3" CMOS 1.3 MegaPixel Color Network Cam
    DNP5220E High Resolution Low Light Dual-codec Professional Network Camera

    The Digimerge DNP5220E network camera is the latest word in high resolution image capture, rugged construction and ease of use. With advanced features, such as auto detect, dual-codec, power over ethernet and compatibility with a variety of video management software platforms, the DNP5220E takes network performance to a whole new level.

  • Rugged die cast metal construction
  • Easy set-up / auto discovery
  • Industry standard IP software and PoE solution compatibility
  • High Resolution (520TV lines) with real time streaming
  • Sony Super HAD 1/3" CCD image sensor
  • MPEG-4/MJPEG dual compression network camera
  • Full D1 resolution at up to 30 fps
  • Video out for connecting to monitors, DVRs etc.
  • Power over ethernet (802.3af) Built-in
  • Supports DC iris lenses (Lens not included)
  • HCX13MW 1/3" CMOS 1.3 MegaPixel Color Network Camera, 12 VDC/24 VAC or PoE 802.3 af, 4.0 mm to 10 mm VFMI F1.8 lens included

    Honeywell's HCX series of megapixel cameras offers world-class video and leading-edge IP networking technologies. When object recognition is needed over a vast field of view, one megapixel camera can often do the same job as several standard analog cameras. Megapixel technology increases the effectiveness of your security system by providing greater detailed images while saving on installation and equipment costs.

    The HCX13M is a megapixel color network camera that offers up to 1.3 MP (1280 X 1024) with frame rates up to 30 frames per second. It adapts to varying lighting conditions to ensure the highest picture quality even in low-light conditions down to 0.2 lux. User selectable exposure windows optimize video performance in the areas of interest. More detailed viewing can be performed using the digital PTZ control.

    The HCX13M network camera includes advanced bandwidth management tools to optimize performance over any network. A built-in Web server provides password protected access to video and network setup. Setup is quick and easy and can be customized through a Web client or from an NVR multi-zone motion detection to trigger motion-based video streaming and privacy zones for blocking portions of the scene that are not to be recorded. An analog output facilitates setup of zoom and focus of the lens using spot monitors and allows easy integration with public view monitors. Choose between 12 VDC/24 VAC power input or PoE 802.3 af for additional installation flexibility.

    Market Opportunities
    The HCX13M provides optimum performance for both indoor and outdoor applications requiring higher resolution over a larger field of view than is available from a high resolution analog camera. Retail and banking industries greatly benefit from using megapixel cameras. When properly positioned, both the full transaction as well as a persons identifying features can be zoomed in to analyze transactions or identify fraud. Other applications include multi-lane driveways, wide lobbies, gated entrances and loading docks.

       
     
    Box Network IP Cameras for Security Surveillance Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please