Home >

 

COMNET C4-FDC10M1B 2Way Contact Closure Transceiver-B 1Multi Mode - COMNET C4-FDC10M1B


COMNET C4-FDC10M1B 2Way Contact Closure Transceiver-B 1Multi Mode - COMNET C4-FDC10M1B


 

Our Price : $384.02

UPC Code: 845770000856

Product Code: COMNETC4-FDC10M1B

Qty:

Description
 
COMNET C4-FDC10M1B 2Way Contact Closure Transceiver-B 1Multi Mode - COMNET C4-FDC10M1B


The ComNet FDC10 Series bi-directional contact closure receiver provides bi-directional transmission of contact closure over one multimode or single mode optical fiber. The transceiver has a contact input and a 0.5 amp contact output. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the "relay input" at the remote end. When the remote "relay input" is shorted, the local relay output is closed and vice-versa. The second relay output is closed when "carrier" is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating. The relay position (open for RED and closed for GREEN) is indicated by separate bi-color indicators for each relay.

Features
  • Transmits a single contact closure in one or two directions
  • Distances up to 69 Km (43 miles)
  • 24 VDC, 0.5 amp relay output, normally open
  • Voltage transient protection on all power and signal Input/output lines provides unconditional protection from power surges and other voltage transient events.
  • Point-to-PoInt transmission architecture
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humldty with condensation, hlgh-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment (In Process)
  • No In-field electrical or optical adjustments required
  • Bi-Coior (Red/Green) Carrier Detect and Relay closed indicators
  • Relay contact for Carrier Detect (normally closed with carrier present)
  • Automatic resettable solid-state current llmlters

Share your knowledge of this product with other customers... Be the first to write a review
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please