You are here: Home > Burglar Alarms / Intrusion >

Accessories for Burglar Alarm Systems

 >

Batteries for Burglar Alarms Systems

 > Caddx
We found 6 results matching your criteria.
Caddx Batteries
Sort By:
Page of 1
Caddx 60-460-01-95 - Crystal 200"° rate-of-rise heat sensor with lithium battery - AVAILABLE IN USA, DISCONINTUED NO REPLACMENT IN CANADA Caddx 60-554 - Battery, 6V, 3.2Ah Cpu Backup Battery
Our Rate-of-Rise Heat Sensor detects danger in areas where high heat may normally occur, such as in kitchens or attics. The Heat Sensor works by detecting rapid temperature changes and extreme heat.

Standard Features


  • Activates when temperature rises 15°F per minute or greater
  • Fixed temperature sensor activates at 135°F
  • Supervisory report every 64 minutes
  • Ceiling or wall mount

 		ITI 6 Volt 3.2 Amp Alarm Battery For SX-V & Caretaker+ 6 Volt Version

Spec's:

6 Volt 3.2 Amp

Dimensions= 2 1/2 Inch W X 4 1/2 Inch H X 1 3/8 Inch D

Note:

This Battery Is Made To Fit:

All The ITI SX-V 6 Volt Series

All The ITI Caretaker & Caretaker+ 6 Volt Series Systems.

Also Replaces The Older 6 Volt 4AH Batteries That Are No Longer Available.

Caddx 60-681 - BATTERY 12 VOLT 4.5 AMP HOUR Caddx 60-703-95 - WIRELESS MOTION DETECTOR CRYSTAL SERIES WITH BATTERY
  • 12 VDC 4.5 Ah Backup Battery
  • Provides 24 hours backup power to the panel and to hardwire devices when AC is out
    •
    The Crystal passive infrared (PIR) motion sensor utilizes the latest in technical improvements to provide superior battery life and improved motion detection in harsh environments. The 60-703-95 Crystal PIR uses one or two (to further increase battery life) AA lithium batteries. This PIR detects movement within a specific area by sensing the infrared energy emitted from a body as it moves across the sensor's field of view, causing a temperature change in the sensor's zones. When this motion is detected, the sensor transmits an alarm signal to the control panel. The indoor motion sensor can be used to protect locations where door/window sensors are impractical or not needed. For example, use a motion sensor to protect large areas or open floor plans. Motion sensors also provide backup protection for door/window sensors. Use the outdoor motion sensor to identify motion in an outdoor area. Detected motion in this protected area can sound chimes or turn on outside lights.

    Features:

    • 35 feet by 40 feet coverage area for standard and optional animal alley lenses
    • Masking kit provided to block portions of coverage area
    • Three minute transmitter lockout time after an alarm that helps extend battery life
    • Cover-activated tamper (optional wall-activated tamper is included)
    • Supervisory signal transmitted every 64 minutes to the control panel
    • Sensor low battery reports (trouble) to the control panel
    • Field-selectable sensitivity options (indoor PIRs)
    • Compatible with all ITI Learn Mode™ Control Panels.

    Specifications:

    • Power source: 1 or 2 AA lithium batteries; ITI Part # 60-619 (six batteries per package)
    • Typical battery life: 8-10 years at 68 F (with one battery - not verified by U.L.) 14-18 years at 68 F (with two batteries - not verified by U.L.)
    • Operating temperature range: 32° to 120°F
    • FCC ID# B4Z-693-PIR
    • Dimensions: L = 2.875” X W = 2.375” X H = 1.875”
      •
    Caddx 60-711 - BATTERY ALKALINE 12 VOLT 6 PACK Caddx 60-713 - Battery Replacement 9V Lith. ULtralife
    Caddx 60-711 - Battery Alkaline 12V 6-Pack

    Caddx 60-713 - Battery Replacement 9V Lith. ULtralife

       
     
    Caddx Batteries