You are here: Home > Fire Alarms >

Detectors for Fire Alarm Systems

>

Carbon Monoxide (CO) detectors for Fire Alarm Systems

We found 41 results matching your criteria.
Protect yourself and your family against the leading cause of accidental poisoning deaths. Purchase carbon monoxide detectors as part of your home fire alarm system. Security Store USA offers carbon monoxide detectors that will alert you when the carbon monoxide levels inside your home increase. Also available are detectors that serve as both carbon monoxide and smoke detector. Features include audible fire alarm signals, plug-ins and battery powered models that will alert you to danger before it’s too late.
Sort By:
Page of 4
BRK First Alert®Model FCD2BN Plug-in Carbon Monoxide Alarm BRK First Alert® Model FCD2BT Plug-In Carbon Monoxide Alarm with Battery Back-up
Same basic features as FCD2DDBN, but without digital display and Peak Level Memory. First Alert® branded.

Features:

  • Silence Feature
  • Test/Silence Button
  • Alarm Indicator Lights
  • 5-Year Limited Warranty on Alarm
  • Same basic features as FCD2DDBN, but without digital display and Peak Level Memory. For added protection, battery back-up powers the alarm if the electricity fails. First Alert® Brand.

    Features:

  • Silence Feature
  • Test/Silence Button
  • Battery Back-up
  • Alarm Indicator Lights
  • 5-Year Limited Warranty on Alarm
  • BRK First Alert® Model FCD2DDBN Digital Display Carbon Monoxide Alarm BRK First Alert Model FCD3BN Battery Powered Carbon Monoxide Alarm
    Plug-in 120V AC, 60 Hz. Samples the air once every second for carbon monoxide. Proprietary COtran® sensing system is individually calibrated at four CO levels for greater accuracy. First Alert® branded.

    Features:

  • Digital Display
  • Peak CO Memory
  • Silence Feature
  • Test/Silence Button
  • Alarm Indicator Lights
  • 5-Year Limited Warranty on Alarm
  • Model FCD3BN
    Battery Powered Carbon Monoxide Alarm
    Battery powered; uses standard 9V battery. Permanent sensor. Can be wall mounted using bracket included, or used as a tabletop device, or as a poratble device you can take with you on cruises, to hotels, etc. Includes an Alarm Action Chart describing how to respond to an alarm. First Alert branded.

    Features:

  • Silence Feature
  • Alarm Action Chart
  • Low Battery Warning "Chirp"
  • Battery Power Indicator
  • Alarm Indicator Light
  • Test/Silence Button
  • 9-volt Alkaline Battery Included
  • 5-Year Limited Warranty on Alarm
  • BRK First Alert® Model FCD4CN-3 Plug-in Carbon Monoxide Alarm, Digital Display, and Remote Control Test/Silence BRK First Alert® SC01BN Battery Powered Combination Smoke and Carbon Monoxide Alarm
    The first and only carbon monoxide alarm you can test using most TV or VCR remote controls! For added protection, the battery back-up powers the alarm for several hours if the electricity fails. Digital display and CO Memory store levels of carbon monoxide detected to help emergency responders and technicians investigate an alarm. Remote Control Test/Silence.* First Alert® branded.

    Features:

  • Digital Display
  • CO Memory
  • Battery Back-Up
  • Silence Feature
  • Test/Silence Button
  • Low Battery Warning "Chirp"
  • Alarm Indicator Light
  • 9-Volt Alkaline Battery Included
  • 5-Year Limited Warranty on Alarm
  • Plug-In (Electrical) Powered

    * This feature works with most standard infrared (IR) remote controls, like those used for TVs and VCRs. It is not compatible with all remote controls. For optimum performance, the path between the CO alarm and the remote control must be free of obstructions, and should not belonger than 20 feet.

  • DISCONTINUED REPLACED BY BR-SC05MR

    Meets UL217 and UL2034 requirements. Ionization smoke alarm provides a warning in case of fire, while carbon monoxide (CO) alarm warns of elevated CO levels. Separate "smoke" and "CO" symbols light up during alarm so residents can see which alarm is sounding. One 9-volt alkaline battery powers both alarms. First Alert® branded.

    Features:

  • Combination Smoke and CO Alarm Technology.
  • Light-up "Smoke" and "CO" Alarm Symbols
  • Silence Feature.
  • Battery Power Indicator
  • Low Battery Warning "Chirp"
  • Alarm Indicator Lights
  • Test/Silence Button.
  • 9-Volt Alkaline Battery Included.
  • 5-Year Limited Warranty on Alarm.
  • BRK MODEL CO5120BN AC Powered Carbon Monoxide Alarm With Battery Back-Up BRK MODEL CO5120PDBN AC Powered Carbon Monoxide Alarm with Battery Backup and Digital Display
    This single or multi-station CO alarm installs in minutes! It has the same contractor- preferred design as our popular Model 4120B smoke alarm, and can be interconnected with up to 11 additional smoke or CO alarms.

    Features:

  • Quick Plug-In Power Connector
  • 120 VAC; Interconnectable
  • Latching Alarm Indicator
  • Smart Inerconnect
  • Battery Drawer Lock
  • Mounting Bracket Lock
  • Swing-Open Battery Door
  • Battery Back-Up
  • Silence Feature
  • AC Power Indicator
  • Alarm Indicator Light
  • Test/Silence Button
  • Low Battery Warning "Chirp"
  • Missing Battery Tab
  • 9V Battery Included
  • 5-Year Limited Warranty on Alarm
  • Digital display with Peak Memory remembers and displays highest CO levels detected. Meets new CO codes in various New York counties. Alarm latching identifies and remembers which unit in an interconnected series initiated an alarm.

    Features:

  • Quick Plug-In Power Connector
  • 120 VAC; Interconnectable
  • Digital Display
  • Latching Alarm Indicator
  • Smart Inerconnect
  • Microprocessor controlled for fewer nuisance alarms
  • Single Button Test/Silence/Scroll
  • Battery Drawer Lock
  • Mounting Bracket Lock
  • AC Power Indicator
  • Alarm Indicator Light
  • Low Battery Warning "Chirp"
  • Missing Battery Tab
  • 9V Battery Included
  • 5-Year Limited Warranty on Alarm
  • Fire-Lite LCD-80F Fire Alarm LCD Annunciator Fire-Lite LED-10 Remote LED-type fire annunciator

    LCD-80F Fire Alarm LCD Annunciator - FireLite

    The LCD-80F is a compact, cost-effective, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS-9200UD and MS-9600 Fire Alarm Control Panels (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions.

    Up to 32 LCD-80Fs may be connected onto the EIA-485 terminal port (TB7) of each FACP. The LCD-80F requires no programming, which saves time during system commissioning.

    Features
    • 80-character Liquid Crystal Display.
    • Mimics all display information from the host panel.
    • Control switches for System Acknowledge, Signal Silence, Drill and Reset with enable key.
    • System status LEDs for Power, Alarm, Trouble, Supervisory and Alarm Silenced.
    • No programming necessary — LCD-80F connects to the terminal port (TB7) on the FACP.
    • Displays device type identifiers, individual point alarm, trouble or supervisory, zone and custom alpha labels.
    • Time-and-date display field.
    • Aesthetically pleasing design.
    • May be powered by 24 VDC from the host FACP or by remote power supplies (requires 24 VDC).
    • Up to 32 LCD-80F annunciators per FACP.
    • Plug-in terminal blocks for ease of installation and service.
    • Can be remotely located up to 6,000 feet (1828.8 m) from the FACP.
    • Local piezo sounder with alarm and trouble resound.
    • Semi-flush mounts to 2.188" (5.556 cm) minimum deep, three-gang electrical box (Fire•Lite P/N 10103) or threegangable electrical switchbox.
    • Surface-mounts to Fire•Lite SBB-3 surface backbox.
    Operation

    The LCD-80F annunciator provides the FACP with point annunciation with full display text on an 80-character LCD display. The LCD-80F also provides an array of LEDs to indicate system status, and includes control switches for remote control of critical system functions.

    The LCD-80F provides the FACP with up to 32 remote serially connected annunciators. All field-wiring terminations on the LCD-80F use removable, compression-type terminal blocks for ease of wiring and circuit testing. Communication between the FACP and the annunciators is accomplished over an EIA-485 serial interface, which greatly reduces wire and installation cost over traditional systems. Six wires total are required: four for the EIA-485 communications (two in and two return); and two for the 24 VDC regulated power. Dip switches control local functions such as: piezo disable, control switches/key-switch disable, transmit/receive mode.

    Installation

    The LCD-80F can be semi-flush mounted to a 2.188" (5.556 cm) minimum deep, three-gang electrical box (Fire•Lite P/N 10103) or three-gangable electrical switchboxes. Alternately, an SBB-3 surface backbox is available for surfacemount applications.

    Product Line Information
    • LCD-80F 80-character, backlit, LCD Fire Annunciator with control switches for remote control of system functions, and key-switch lock.
    • 10103 Three-gang electrical box, minimum 2.188" (5.556 cm) deep, for semi-flush mount applications.
    • SBB-3 Three-gang surface backbox for surface-mount applications.

    LED-10 Remote LED-type fire annunciator with ten Alarm (red) and Trouble (yellow) LEDs for displaying initiating device circuit (zone) status. Includes control switches for remote control of critical system functions and key switch lock.

    The Fire•Lite LED-10 Series are compact, cost-effective LED Fire Annunciators for use with the MicroScan-5210UD tenzone Fire Alarm Control/Communicator. The LED-10 Series consists of three models: the basic LED-10, the low-cost LED-10L and the Canadian LED-10LS2. The LED-10(L) is capable of illuminating Alarm (red) and Trouble (yellow) LEDs for all ten Initiating Device Circuits (IDCs). The LED-10LS2 is primarily designed for Canadian applications, and includes two yellow LEDs on zones 9 and 10 for annunciating supervisory conditions. The LED-10 Series also provides system status LEDs to display Power (green), Alarm (red), Trouble (yellow), Supervisory (yellow) and Signals Silenced (yellow). Remote control of critical system functions, such as Reset, Silence, Acknowledge and Drill, can be accomplished with the model LED-10 only.

    FEATURES
    • Control Switches for System Acknowledge, Signal Silence, Drill and Reset with enable key are included on model LED- 10 only (shown).
    • All models include system status LEDs for Power (green), Alarm (red), Trouble (yellow), Supervisory (yellow) and Signals Silenced (yellow).
    • No programming necessary.
    • Aesthetically pleasing, semi-flush-mount design.
    • Serial EIA-485 interface for reduced installation cost (see reverse side for wiring diagram).
    • May be powered by 24 VDC from the host FACP or by remote power supplies (requires filtered, regulated power).
    • Up to 32 LED-10 Series annunciators per MS-5210UD.
    • Plug-in terminal blocks for ease of installation and service.
    • Can be remotely located up to 6,000 feet from host control panel.
    • Local piezo sounder with alarm and trouble resound.
    • Semi-flush-mounts to 2-3/16" deep (minimum), threegang electrical box (Fire•Lite P/N 10103 or equivalent); or surface-mounts to Fire•Lite SBB-3 surface backbox.

    Fire-Lite LED-10IM LED-10 Interface Module Fire-Lite RA400Z Remote LED annunciator
    LED-10IM LED-10 Interface Module (one required per MS-5210UD; supports up to 32 LED-10's). RA400Z Remote LED annunciator. 3 – 32 VDC. Fits U.S. single-gang electrical box. For use with B501 and B350LP bases only.
       
     
    Carbon Monoxide (CO) detectors for Fire Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please