|
|
|
|
|
|
|
|
|
CC-604 Series 600 200Degree Fixed Temperature Detect - CC-604
The Series 600 Heat Detector is attractive, durable and features combination rate-of-rise and fixed temperature operation. Heat detectors are available in 135øF and 200øF temperature ratings. Rate-of-rise detects heat by quickly responding to a rapid temperature increase. Rate-of-rise units have a wide spacing allowance of 50-foot centers. See specification table for details. Fixed temperature reacts to heat by responding to a specific temperature setting.
Series 600 Detectors use the same reliable pneumatic rate-of-rise element of former models, but offer added aesthetic appeal.
The pneumatic rate-of-rise element responds to a rapid rise in temperature, approximately 15"F. (8øC) per minute, by expansion of air within the sealed chamber faster than it can escape through a calibrated vent. The resultant increase in pressure depresses the diaphragm, causing the electrical contact to dose the circuit. The fixed temperature element uses a fusible alloy. When activated, the external heat collector drops away to provide quick visual confirmation that the element has operated. The units protrude only 1-3/8 inch from the ceiling surface with a junction box mounting. They have pleasing contours and an all-white finish that conforms to ceiling aesthetics
|
CC-AHC135 Chemetron AHC-135 Replacement Heat Collector 135 deg F - CC-AHC135
The compact and attractive Series 400 Fixed Temperature Heat Detector is ideal for single and dual circuit operation. Its close calibration stability, heat sensitivity, and interchangeable components make it suitable for a wide variety of applications. There is positive indication of operation, and a replaceable fusible element which provides for quick easy restoration to service
For mounting Model A on 3 or 4 inch octagon boxes or standard plaster rings. Mounting screws are included
|
|
|
|
|
|
|
|
|
|
|
|
CC-APC Chemetron 751925 APC Protective Cover - CC-APC
The compact and attractive Series 400 Fixed Temperature Heat Detector is ideal for single and dual circuit operation. Its close calibration stability, heat sensitivity, and interchangeable components make it suitable for a wide variety of applications. There is positive indication of operation, and a replaceable fusible element which provides for quick easy restoration to service
High strength, molded matched white polypropylene cover fits snugly over the detector body to secure against damage or unauthorized removal. Suitable for use in temperatures up to 221?F (105?C)
|
CC-AR5 Chemetron Adapter Plate - CC-AR5
The compact and attractive Series 400 Fixed Temperature Heat Detector is ideal for single and dual circuit operation. Its close calibration stability, heat sensitivity, and interchangeable components make it suitable for a wide variety of applications. There is positive indication of operation, and a replaceable fusible element which provides for quick easy restoration to service
|
|
|
|
|
|
|
|
|
|
|
|
CC-AT135 Chemtron 451008 Fixed Temperature(2) N/O Plate - B23
The Series 600 heat detector is attractive, durable and features a combination rate-of-rise and fixed-temperature operation. The heat detectors are available in 135?F (57Deg) or 200?F (94Deg) temperature ratings
The fixed temperature function reacts to heat by responding to a specific temperature setting. The element is constructed of a fusible alloy, which fuses at the fixed temperature setting of either 135?F (57Deg) or 200?F (94Deg). When activated, the external heat collector drops away to provide quick visual confirmation that the element has operated
|
CC-AT200 Chemtron 451051 Fixed Temperature(2)N/O Plate - CC-AT200
|
|
|
|
|
|
|
|
|
|
|
|
CC-ATA ATA Plate Adapter - CC-ATA
Where life safety is involved, smoke detectors MUST also be used
Heat detectors should be used for property protection only
Reliance should not be placed solely on heat detectors for life safety
Detectors must not be painted
Heat detectors should be electronically supervised with battery backup at the panel
|
CC-EPBMPB503 Explosion/Mosist Proof Fixed 136Degree - CC-EPBMPB503
The Series 500 Special Assembly detector is a dual action, electric fire detection thermostat. It employs two independent methods of detection: Rate-of-Rise and Fixed Temperature
The Explosion and Moisture Proof Models (EPB/MPB) consist of a cast metal box, cover plate and modified 500 Series detector. The back box has 2 opposing wire entrances threaded for 1/2 inch rigid conduit. The box, cover and base are precision
machined for extremely close tolerance fit
|
|
|
|
|
|
|
|
|
|
|
|
CC-EPBMPB504 Explosion/Mosist Proof Fixed 190Degree - CC-EPBMPB504
The Series 500 Special Assembly detector is a dual action, electric fire detection thermostat. It employs two independent methods of detection: Rate-of-Rise and Fixed Temperature
The Explosion and Moisture Proof Models (EPB/MPB) consist of a cast metal box, cover plate and modified 500 Series detector. The back box has 2 opposing wire entrances threaded for 1/2 inch rigid conduit. The box, cover and base are precision
machined for extremely close tolerance fit
|
CC-WPBMPB501 Weather/Mosist Proof RR/Fixed 136Degree - CC-WPBMPB501
The Series 500 Special Assembly detector is a dual action, electric fire detection thermostat. It employs two independent methods of detection: Rate-of-Rise and Fixed Temperature
The Weather /Moisture Proof Models (WPB/MPB) consist of a cast metal box, gasket and special steel cover plate integrated with the Series 500 detector. A crossed wire guard is added for extra protection. The emerging wire points are sealed with epoxy, increasing the resistance to moisture, The cast metal box has 4 wire entrances for 1/2 inch rigid conduit. The unit offers combined protection against weather and condensation in the conduit
|
|
|
|
|
|
|
|
|
|
|
|
CC-WPBMPB502 Weather/Mosist Proof RR/Fixed 200Degree - CC-WPBMPB502
The Series 500 Special Assembly detector is a dual action, electric fire detection thermostat. It employs two independent methods of detection: Rate-of-Rise and Fixed Temperature
The Weather /Moisture Proof Models (WPB/MPB) consist of a cast metal box, gasket and special steel cover plate integrated with the Series 500 detector. A crossed wire guard is added for extra protection. The emerging wire points are sealed with epoxy, increasing the resistance to moisture, The cast metal box has 4 wire entrances for 1/2 inch rigid conduit. The unit offers combined protection against weather and condensation in the conduit
|
CC-WPBMPB503 Weather/Mosist Proof Fixed 136Degree - CC-WPBMPB503
The Series 500 Special Assembly detector is a dual action, electric fire detection thermostat. It employs two independent methods of detection: Rate-of-Rise and Fixed Temperature
The Weather /Moisture Proof Models (WPB/MPB) consist of a cast metal box, gasket and special steel cover plate integrated with the Series 500 detector. A crossed wire guard is added for extra protection. The emerging wire points are sealed with epoxy, increasing the resistance to moisture, The cast metal box has 4 wire entrances for 1/2 inch rigid conduit. The unit offers combined protection against weather and condensation in the conduit
|
|
|
