You are here: Home > Burglar Alarms / Intrusion >

Sensors for Burglar Alarm Systems

>

Door and Window Contact Sensors for Burglar Alarm Systems

>

Closed Loop Door/Window Contact Sensors for Burglar Alarm Systems

We found 734 results matching your criteria.
Burglar alarms often use closed loop door and window contacts to provide the best level of security. Closed loop design for commercial and home alarm systems is considered superior for many reasons, including the fact that any attempt to cut a system wire before entering will activate the alarm. Security Store USA enhances this ability with a full line of closed loop sensors available in various gap sizes, mounting methods, and colors.
Sort By:
Page of 62
G.R.I  200L36   Overhead Door Switch , Floor Mount, 3' Armored Cable, Closed Loop, 4175 "L" Bracket, w/ M-15 Closed Magnet G.R.I.  20036  Overhead Door Switch, Floor Mount, 3' Armored Cable, Closed Loop, w/ M-250 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY

The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GE 1085TWM Surface Screw Mount Terminal Contact, Closed Loop, Wide Gap, Brown, 1 1/2" Gap Size GE 1085TWN Surface Screw Mount Terminal Contact, Closed Loop, Wide Gap, White, 1 1/2" Gap Size

    The 1085TWM is ideal for residential and commercial applications where a Closed Loop, N.O. contact with up to 1 1/2 inch gap and terminal connections are preferred. The unit features positive clamping terminals with anti-rotation lugs and captured screws with combination heads.

  • Positive terminals with captured screws and combination heads for easy installation.
  • Cover, spacers, and mounting hardware included.
  • Ideal for residential and commercial applications where terminal connections are preferred
  • The 1085TWN is ideal for residential and commercial applications where a Closed Loop, N.O. contact with up to 1 1/2 inch gap and terminal connections are preferred. The unit features positive clamping terminals with anti-rotation lugs and captured screws with combination heads.

  • Positive terminals with captured screws and combination heads for easy installation.
  • Cover, spacers, and mounting hardware included.
  • Ideal for residential and commercial applications where terminal connections are preferred
  • Wide Gap; up to 1 1/2 inch

    10 PACK

  • GI 1100A72B Mini Surface Mount, Closed Loop, Screw Mount, With Covers, 72" Lead, Brown - AVAILABLE IN MULTIPLES OF 10 ONLY GI 1100AGY Mini Surface Mount, Closed Loop, Screw Mount, With Covers, Grey - AVAILABLE IN MULTIPLES OF 10 ONLY

    GRI's 1100 Series offers the installer convenience and versatility with its smaller size and attractive design allowing it to be used in both residential or commercial applications. With its Standard Gap of over 1" and a wide gap of 1 1/2", the 1100 gives even more options for usage.

    Packaged with one spacer, applicable mounting hardware, the 1100 also has a cover which gives a finished look to the installation, plus adds the option for private labeling.

    1100 Series Features

  • Lifetime Warranty
  • Screw mount
  • Available in closed loop, open loop and SPDT
  • Standard gap 1"+ gap
  • Wide gap 1 1/2"+ gap
  • Standard 12" leads
  • Longer leads, zip cord or jacketed cable on request
  • Spacers and mounting hardware included
  • Attractive cover for private labeling
  • Built-in E.O.L. resistors and diodes available on request
  • Switches or magnets are available separately
  • Supervisory loops available
  • GRI's 1100 Series offers the installer convenience and versatility with its smaller size and attractive design allowing it to be used in both residential or commercial applications. With its Standard Gap of over 1" and a wide gap of 1 1/2", the 1100 gives even more options for usage.

    Packaged with one spacer, applicable mounting hardware, the 1100 also has a cover which gives a finished look to the installation, plus adds the option for private labeling.

    1100 Series Features

  • Lifetime Warranty
  • Screw mount
  • Available in closed loop, open loop and SPDT
  • Standard gap 1"+ gap
  • Wide gap 1 1/2"+ gap
  • Standard 12" leads
  • Longer leads, zip cord or jacketed cable on request
  • Spacers and mounting hardware included
  • Attractive cover for private labeling
  • Built-in E.O.L. resistors and diodes available on request
  • Switches or magnets are available separately
  • Supervisory loops available
  • GI 1100AW Mini Surface Mount, Closed Loop, Screw Mount, With Covers, White - AVAILABLE IN MULTIPLES OF 10 ONLY GI 5602B (1100AB) Mini Surface Mount, P/L F/American Alm, Closed Loop, Screw Mount, With Covers, Brown

    GRI's 1100 Series offers the installer convenience and versatility with its smaller size and attractive design allowing it to be used in both residential or commercial applications. With its Standard Gap of over 1" and a wide gap of 1 1/2", the 1100 gives even more options for usage.

    Packaged with one spacer, applicable mounting hardware, the 1100 also has a cover which gives a finished look to the installation, plus adds the option for private labeling.

    1100 Series Features

  • Lifetime Warranty
  • Screw mount
  • Available in closed loop, open loop and SPDT
  • Standard gap 1"+ gap
  • Wide gap 1 1/2"+ gap
  • Standard 12" leads
  • Longer leads, zip cord or jacketed cable on request
  • Spacers and mounting hardware included
  • Attractive cover for private labeling
  • Built-in E.O.L. resistors and diodes available on request
  • Switches or magnets are available separately
  • Supervisory loops available
  • GRI's 1100 Series offers the installer convenience and versatility with its smaller size and attractive design allowing it to be used in both residential or commercial applications. With its Standard Gap of over 1" and a wide gap of 1 1/2", the 1100 gives even more options for usage.

    Packaged with one spacer, applicable mounting hardware, the 1100 also has a cover which gives a finished look to the installation, plus adds the option for private labeling.

    1100 Series Features

  • Lifetime Warranty
  • Screw mount
  • Available in closed loop, open loop and SPDT
  • Standard gap 1"+ gap
  • Wide gap 1 1/2"+ gap
  • Standard 12" leads
  • Longer leads, zip cord or jacketed cable on request
  • Spacers and mounting hardware included
  • Attractive cover for private labeling
  • Built-in E.O.L. resistors and diodes available on request
  • Switches or magnets are available separately
  • Supervisory loops available
  • GI-20036HD Overhead Door / Floor Mount, 3' Armored Cable, Closed Loop, M-280 Magnet, Heavy Duty -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-20036WG Overhead Door Switch, Floor Mount, 7-1/2" Switch, 3' Armored Cable, Closed Loop, Extended Gap, W/ M-280 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  • GI-250-36 Overhead Door Switch, Wall Mount, 3' Armored Cable, Closed Loop, W/ M-250 Magnet -  AVAILABLE IN MULTIPLES OF 10 ONLY GI-250-36EPAK Overhead Door Switch, Wall Mount, 3' Armored Cable, Closed Loop, W/ M-250 Magnet, W/470OHM, S/7000 OHMP -  AVAILABLE IN MULTIPLES OF 10 ONLY

    The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately

    GI-250-36EPAK

  • The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch.

    The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet.

    200 Series Standard Features

  • time Warranty
  • UL and ULC approved
  • Gap: min. 3/8", max 3"
  • Available in closed loop, open loop and SPDT
  • Extruded aluminum switch
  • 36" stainless steel armored cable
  • Floor or wall mount adaptable
  • Magnet bracket included
  • Supervisory loops available
  • Switch, magnet and hardware are available separately
  •    
     
    Closed Loop Door/Window Contact Sensors for Burglar Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please