 |
 |
 |
|
System 5 Full-Featured ● Master Access Control System panel ● Supports 4 doors ● Expand to 8 doors by adding a 25-4009 Slave panel ● 750 users, 64 time zones, 16 holidays, 250 event buffer, door-ajar, request-to-exit, forced entry, relay time-cancel, anti-passback, RS-232 output ● 4 main relays & 1 aux relay ● Supports keypads, data chips (requires 54-4301 for data chip), 26 & 30-bit Wiegand & proximity, mag stripe or bar code (requires 54-4141 for card technologies) ● Can program w/ a VDT or PC ● Includes serial printer, video display terminal, 52-4020 keypad, backup/restore CD-ROM, battery & transformer ● Cabinet: 11" W x 15.5" H x 4.5" D (279mm x 394mm x 114mm) System 5
The System 5 Access Control System supports up to 750 users. Each user can be added or deleted in seconds using the supplied Video Display Terminal (VDT). The built-in relays can switch power to electric Door Locks, arm or disarm Alarm Systems, shunt Alarm Devices, or operate Garage Doors.
Access a secured area using Keypads, Card, or Chip Readers. A Request-To-Exit button can be used to exit an area and, a Magnetic Contact can be installed to report Door Ajar conditions. For applications requiring time restriction of users and/or automatic relay operation, eight time schedules and 64 time zones are supported.
Users can pass through an entry point secured by a keypad, reader, or combination of both by entering a correct code into the keypad or presenting a valid card or Data Chip to the reader. The System then decides if the user is allowed access to this door during the current time and either grants or denies access. Valid entries and invalid attempts are recorded. Public access doors can be programmed to automatically open according to the programmed time schedules set up by the personnel director.
The System 5 has a built-in clock and calendar that automatically adjusts for daylight savings time and leap year. Up to 16 holidays allow the System to selectively engage alternate holiday schedules for users and doors. You may also program, monitor, backup, restore and print reports from a remote location using high speed modems.
Features | 16 Holidays | Remote Set-up |
| 64 Time Zones | Expandable to 8 |
| Remote Reporting | 80 Column Printer |
| Remote Programming | Backup/Restore Software |
Specifications | Input Voltage | Class II Transformer 16.5 VAC @ 40 VA |
| Backup Supply | 4 amp Battery |
| Door Relay | 4 - Form C 5A @ 30 VDC |
| Auxiliary Relay | 1 - Normally Open 1A @ 30 VDC |
| Door Inputs | 4 - Data Inputs - Keypad, Card, Chip |
| Cabinet Size | 15.5" X 11" X 4.5" |
| Operating Temperature | 0° F - 110° F |
|
|
|
 |
|
 |
|
|
|
