Home > Audio / Video > Amplifiers >

 

Crown Audio CTS 4200 CTS Series Amplifier

5C-CTS4200A


Crown Audio CTs 4200 CTS Series Amplifier


 

Our Price : $1,255.75


Product Code: 505239

Qty:

Description
 
Building on the foundation of the Com-Tech® Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

Features
  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
  • A fixed 35-Hz (70-Hz in CTs 4200) high-pass filter per channel pair is automatically inserted when the mode switch is set to either of the constant- voltage settings. The high-pass filter corner frequency in the CTs 8200 can be set to 70 Hz, or bypassed, with a service option
  • Comprehensive array of indicators including Power and Data, along with Bridge, Ready, Signal, Clip, Thermal and Fault for each channel, provide accurate diagnostics
  • Blue Power Indicator flashes if the amplifier shuts off due to an under/over voltage condition on the AC mains
  • New Crown Switching Power Supply for reduced weight
  • High power-density, with four channels (CTs 4200) or eight channels (CTs 8200) in a 3U chassis
  • Selectable constant-voltage (70V/100V) or lowimpedance (4/8 ohm) operation for each channel pair (channel pair must be operated in Bridge mode for 100V output)
  • FIT (Fault Isolation Topology) circuitry isolates faults within affected channels
  • TLC protection circuitry protects the amplifi er from excessive heat by subtly and dynamically reducing the gain only when necessary to reduce heat levels
  • Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, under-/over-voltage, high-frequency overloads and internal faults
  • Continuously-variable fans optimize cooling effi ciency
  • Three Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
  • Crown’s advance-replacement Profit Protection Plan provides quick, no-questions-asked replacement of covered amps should they fail at any time up to 6 months following date of installation
  • Proven Crown AB+B Multi-Mode® output topology
  • Crown’s advance-replacement Profit Protection Plan provides quick, no-questions-asked replacement of covered amps should they fail at any time up to 6 months following date of installationHigh power-density, with four channels (CTs 4200) or eight channels (CTs 8200) in a 3U chassis
  • Selectable constant-voltage (70V/100V) or lowimpedance (4/8 ohm) operation for each channel pair (channel pair must be operated in Bridge mode for 100V output)
  • Accepts VCA-MC accessory module that allows remote VCA volume control lus monitoring of shorted outputs, open circuits, DC, mismatched loads, general overheating, under-/over-voltage, high-frequency overloads and internal faults
  • Crown’s advance-replacement Profit Protection Plan provides quick, no-questions-asked replacement of covered amps should they fail at any time up to 6 months following date of installation

    Specifications
  • Minimum Guaranteed Power: See power charts below.
  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.5 dB.
  • Phase Response (at 1 watt, 10 Hz - 20 kHz): ±35°.
  • Signal to Noise Ratio below rated power (20 Hz to 20 kHz): 100 dB unweighted.
  • Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz: < 0.05%.
  • Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from 163 milliwatts to full bandwidth power: < 0.05% (typical).
  • Damping Factor: 10 Hz to 400 Hz: >180.
  • Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB.
  • Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB.
  • DC Output Offset (shorted input): < ±5 mV.
  • Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
  • Maximum Input Level (before input compression): + 20 dBu.
  • Load Impedance: (Note: Safe with all types of loads)
    Stereo: 4/8 and 25 ohms (70V)
    Bridge Mono: 8/16 and 50 ohms (100V)
  • Voltage Gain (at maximum level setting), 1.4V sensitivity, 4/8 Ohm Operation: 20:1 (26 dB); 70V Operation: 50:1 (34 dB) 100V Operation: 71.4:1 (37 dB)
  • AC Line Voltage and Frequency Configurations Available (±10%): 120V/60 Hz, 220/230/240V/50 Hz.
  • Power Draw at Idle (120VAC mains, all channels in 4/8 ohm mode): 58W.
  • Power Draw at Idle (120VAC mains, all channels in 70V mode): 77W.
  • Cooling: Continuously variable speed forced air, front-to-back airflow.
  • Dimensions (Width, Height, Depth):
    CTs 4200: 19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.25 in. (41.3 cm) D.
    CTs 8200: 19 in. (48.3 cm) W x 5.25 in. (13.3 cm) H x 16.25 in. (41.3 cm) D.

  • Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Audio / Video > Amplifiers
    Shop Brands > Crown Audio > Amplifiers
    Shop Brands > Crown Audio
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please