Thus, the 4-channel CTs 4200 uses two connectors; the 8-channel CTs 8200 uses four connectors. Crown CTs 4200 and 8200 amplifiers can be supplied with a VCA-MC module already factory- installed, or your choice of MC modules can be easily added to the amplifier by any authorized Crown Service Center. Contact Crown Technical Support for more details.
Also available are optional wall-mount level control panels for use the the VCA module: the 1-VCAP and 4-VCAP. The 1-VCAP is a single-gang panel providing remote volume control for one or more CTs amplifier channels. The potentiometer on the panel is wired directly to one of the VCA connectors on the VCA-MC. The 4-VCAP is a two-gang panel providing remote volume control for four or more CTs amplifier channels. Each potentiometer on the panel is wired directly to the respective VCA connector on the VCA-MC.