How can extend the standard storage capacity of my DVR? How can I add redundancy into my system to ensure my recordings are safe?
The introduction of the Dedicated Micros RAID system answers, and surpasses, both these questions.
The Dedicated Micros RAID unit has been designed to offer compatible with the Dedicated Micros DVR and DVIP system. It allows additional storage capacity to be added to the existing internal hard disk of the DVR and enhances this by offering redundancy and resilience to ensure any recorded video images are securely stored.
RAID (Redundant Array of Independent Disks) gives that 'peace of mind' factor that even in the unlikely event of disk failure the video information will not be lost, the redundancy of the system ensures that the video from the failed disk has simultaneously been stored on one of the other disks in the system.
Simple to install and configure the RAID unit can become part of a new installation or added to an existing system to enhance the system capabilities - increased, secure recording.
A single RAID or multiple RAIDs can be added to the system by daisy chaining the units together, this allows the storage capacity of a single DVR to be increased to up to 14T.
With resilience and redundancy of the system the RAID unit is very powerful and would be an ideal solution for high security applications. But with the competitive pricing it means that this powerful, secure storage solution can be included in any application requiring large storage capacity.
Supporting 'hot swap' allows disks to be removed and replaced without interrupting the system and without the loss of any information; any power supplies or fan can also be replaced without the need to switch the unit off.
With self diagnostics any internal issues that may occur can be quickly and easily identified and notification presented to the Administrator. Features:
Operating System independent Supports virtually all 'common' Operating Systems, platforms and network environments to ensure the RAID and Dedicated Micros can meet any customer requirement. Selective RAID levels
The RAID unit by default is set as RAID 5 however there is the option to configure the device to meet the specification requirements - RAID 0, 1, 0+1, 3 or 5, JBOD. Hot Swap components
The RAID units supports 'hot swap' for the internal hard disks drives, redundant power supply unit and cooling fan ensuring the operation of the system is never interrupted and all recordings are secure.
Specifications: TYPICAL RECORD TIME*: 500 DAYS RAID LEVELS JBOD / RAID 0,1,0+1,3,5,30,50 SCSI HOST INTERFACES 2X ULTRA320 LVD SCSI DISK CADDIES 8X HOT SWAPPABLE SATA DATA REBUILD AUTOMATIC DATA REGENERATION DISK SIZE: 750GB UNFORMATTED CAPACITY: 6TB DEFAULT RAID LEVEL: 1X RAID 5 DEFAULT PARITY DISKS: 1X 750GB DEFAULT FORMAT: 1X 5.25TB FAULT TOLERANT SATA DISKS VENTILATION: 2X REPLACEABLE FANS POWER SUPPLY: 2X 300W REDUNDANT HOT SWAPPABLE AC INPUT VOLTAGE: 100-240V (+/-10%), 47-63HZ AC INPUT CONNECTORS: 2X IEC MALE OPERATING TEMPERATURE: 5-40oC OPERATING HUMIDITY: 10% TO 85% NON-CONDENSING DIMENSIONS (MM): 88(H) X 485(W) X 470(D) WEIGHT EXCLUDING DISKS: 16KG WEIGHT INCLUDING DISKS: 21KG SHIPPING WEIGHT: RAID BOX 24KG / DISK BOX 10KG
*Record time based on 6PPS 18Kb file size on DM DVR.